NetApp Certified Technology Associate (NS0-003)

Access Groups Contain two objects. What are they - ANSWER volumes and initiators Which NetApp HCI data fabric integration provides file services? - ANSWER ONTAP Select When yo install a new storage node in an H410 ...

Access Groups Contain two objects. What are they - ANSWER volumes and initiators Which NetApp HCI data fabric integration provides file services? - ANSWER ONTAP Select When yo install a new storage node in an H410 chassis, what must you add? - ANSWER Six SSDs for the node in the dedicated drive slots Compute nodes in a NetApp HCI appliance chassis Require/don't require SSDs? - ANSWER Don't Require What VMware vSphere switch architecture is used with the two-cable option? - ANSWER vSphere Distributed Switch What must you configure before you start the NetApp Deployment Engine (NDE)? - ANSWER an IP Address for the management network on one NetApp HCI storage node Describe the NetApp Deployment Engine (NDE) in new VMware vCenter Server environments? - ANSWER NDE installs and configures both the VMware Center Server and NetApp Element Plug-in for VMware vCenter Server. The NetApp Element Plug-In for VMware vCenter Server is divided into what two extension points? - ANSWER Configuration and Management Describe how volume access control is configure by the NetApp Deployment Engine (NDE). - ANSWER An initiator is created for each compute node, which is added to the volume access group. Which NetApp Element Plug-in for VMware vCenter Server feature is available for datastores? - ANSWER clones Which NetApp product integration can be deployed to add file services to NetApp HCI? - ANSWER ONTAP Select Which NetApp HCI integration can be used to provide cross-platform failover for disaster recovery? - ANSWER SnapMirror to ONTAP Name three network types. - ANSWER Data Network, management Network, cluster interconnect ____________ provides availability of a partner's physical resources during a node failover - ANSWER HA Pair ____________ Acts as a collection of RAID groups - ANSWER Local Tier What type of VM owns logical storage and network resources? - ANSWER Storage VM This provides a network access point to a storage VM. - ANSWER Logical Interface (LIF) What can a LIF be associated with? - ANSWER physical port, interface group, or vlan Which cluster configuration provides a cost-effective, nondisruptively scalable solution: Multi-node switched, 2-node switchless, or MetroCluster? - ANSWER 2-node Switchless What is the maximum number of cluster switches that can be used in a multinode switched cluster configuration? - ANSWER Two Wjat is the minimum number of disk that are required to create a RAID DP data aggregate (excluding hot spares)? - ANSWER Six What does a Flash Pol Aggregate contain? - ANSWER Hard Disk for data storage and SSDs for caching True or False - ANSWER In addition to data volumes what other two volumes do FlexVol Volumes include? - ANSWER SVM root volume and the node root volume What is WAFL? - ANSWER Write Anywhere File Layout A files system that organizes blocks of data into files. It stores metedata in Inodes. What is an INode - ANSWER Index Node Pointers to the block on disk that hold the actual data. Every file has a INode and each volume has a hidden INode. RAL (Remote Access Layer) - ANSWER A feature in ONTAP software that sits on top of the WAFL layer and is used to direct remote traffic in a FlexGroup Volume FlexVol - ANSWER a data container associated with a Storage Virtual Machine (SVM) with FlexVol volumes. It gets its storage from a single associated aggregate, which it might share with other FlexVol volumes or Infinite Volumes. It can be used to contain files in a NAS environment, or LUNs in a SAN environment. System Memory - ANSWER Memory that is not backed up NVRAM - ANSWER (Non Volatile Random Access Memory) Ram that is battery-backed Consistency Point - ANSWER The point at which the data system memory is committed to disk. When a client reads or writes to a volume that is on a node other than the node that the client is connected to, access is said to be: - ANSWER indirect for reads and writes HBA - ANSWER Host Based Adapter FlexCache Volume - ANSWER A caching technology that creates sparse, writeable replicas of volumes on the same of different ONTAP clusters. FlexCache software supports cahce access to what types of clients? - ANSWER NFSv3 and SMB FabricPool - ANSWER A data fabric technology powered by NetApp that enables automated tiering of data based on how frequently the data is accessed. FabricPool technology moves data based on access patterns between what two locations? - ANSWER Local Tier (aggregate) and a cloud tier Which name is the name of a predefined cluster role: admin, root, svadmin, vsadmin? - ANSWER admin Which LIF is used to access ONTAP System Manager? - ANSWER Cluster Management LIF During cluster creation process what account is created automatically? - ANSWER admin SVM How many admin SVMs are created to represent a cluster? - ANSWER One This is the minimum number of data SVMs a cluster must have to serve data to its clients. - ANSWER One What happens if a failure occurs on the node that the management LIF is connected to? - ANSWER The LIF will failover to another node in the cluster. (failover is only for NAS LIFs. SAN LIFs do not fail over) Step 1 in configuring a new cluster is - ANSWER Cluster Initialization (includes setup of cluster node management networks and cluster management accounts) Step 2 in configuring a new cluster is - ANSWER Create Local Tiers from available disk or SSDs on the node Step 3 in configuring a new cluster is - ANSWER Configure networking Step 4 in configuring a new cluster is - ANSWER Enable Protocols and create network interfaces to access the storage Step 5 in configuring a new cluster is - ANSWER Provision the storage What are the two levels of data protection provided by System Manager? - ANSWER Local and remote In System Manager what are the remote protection policies offered? - ANSWER Asynchronous replication, Synchronous replication, and SnapMirror Business Continuity What port speed is supported for cluster interconnect? - ANSWER 10GB LIF Failover - ANSWER An automatic migration of a LIF from one network port to another LIF Migration - ANSWER The process of moving a LIF from one network port to another port LIF revert - ANSWER Return of a failed-over or migrated LIF to its home port (can be done manually or automatically Which two items can a LIF represent? - ANSWER IP Address and a WWPN (World Wide Port Name) What are the four types of Storage Virtual Machines (SVM) in a cluster? - ANSWER Admin Storage VM, Node Storage VM, System Storage VM, Data Storage VM What two ONTAP software features can increase volume efficiency? - ANSWER Deduplication and Data Compression What What two ONTAP software features can increase flash efficiency? - ANSWER Aggregate Level inline deduplication and Inline data compaction Which data compression methods are available in ONTAP software? - ANSWER inline and postprocess Which upgrade type can group HA pairs that are upgrade together? - ANSWER batch and automated I/O operations can be categorized into what two categories? - ANSWER Random or Sequential Which feature can you configure to prevent workloads or tenants from negatively from effecting each other's performance? - ANSWER Performance Service Level Which component connects FAS or AFF controller to form a multinode cluster? - ANSWER Cluster Interconnect Which part of storage architecture is a logical storage resource: aggregate, FlexVol Volume, drive, RAID group? - ANSWER FlexVol Volume How many parity disk are there in a RAID DP aggregate that was created using 44 dis and a RAID group size of 15? - ANSWER 6 How odoes the NetApp file system WAFL use NVRAM? - ANSWER NVRAM enables write operations to be acknowledged to to the client before being written to disk Which two condition trigger a consistency point (CP)? - ANSWER 10 second timer expires or NVRAM buffer fills up How does a client nondisruptibvely access a volume that has been moved t