GCE
Mathematics A
H230/01: Pure Mathematics and Statistics
Advanced Subsidiary GCE
Mark Scheme for Autumn 2021
Oxford Cambridge and RSA Examinations
GCE
Mathematics A
H230/01: Pure Mathematics and Statistics
A
...
GCE
Mathematics A
H230/01: Pure Mathematics and Statistics
Advanced Subsidiary GCE
Mark Scheme for Autumn 2021
Oxford Cambridge and RSA Examinations
GCE
Mathematics A
H230/01: Pure Mathematics and Statistics
Advanced Subsidiary GCE
Mark Scheme for Autumn 2021Oxford Cambridge and RSA Examinations
OCR (Oxford Cambridge and RSA) is a leading UK awarding body, providing a wide range of
qualifications to meet the needs of candidates of all ages and abilities. OCR qualifications
include AS/A Levels, Diplomas, GCSEs, Cambridge Nationals, Cambridge Technicals,
Functional Skills, Key Skills, Entry Level qualifications, NVQs and vocational qualifications in
areas such as IT, business, languages, teaching/training, administration and secretarial skills.
It is also responsible for developing new specifications to meet national requirements and the
needs of students and teachers. OCR is a not-for-profit organisation; any surplus made is
invested back into the establishment to help towards the development of qualifications and
support, which keep pace with the changing needs of today’s society.
This mark scheme is published as an aid to teachers and students, to indicate the requirements
of the examination. It shows the basis on which marks were awarded by examiners. It does not
indicate the details of the discussions which took place at an examiners’ meeting before marking
commenced.
All examiners are instructed that alternative correct answers and unexpected approaches in
candidates’ scripts must be given marks that fairly reflect the relevant knowledge and skills
demonstrated.
Mark schemes should be read in conjunction with the published question papers and the report
on the examination.
© OCR 2021H230/01 Mark Scheme October 2021
2
Text Instructions
1. Annotations and abbreviations
Annotation in RM assessor Meaning
and
BOD Benefit of doubt
FT Follow through
ISW Ignore subsequent working
M0, M1 Method mark awarded 0, 1
A0, A1 Accuracy mark awarded 0, 1
B0, B1 Independent mark awarded 0, 1
SC Special case
^ Omission sign
MR Misread
BP Blank Page
Seen
Highlighting
Other abbreviations in
mark scheme
Meaning
dep* Mark dependent on a previous mark, indicated by *. The * may be omitted if only one previous M mark
cao Correct answer only
oe Or equivalent
rot Rounded or truncated
soi Seen or implied
www Without wrong working
AG Answer given
awrt Anything which rounds to
BC By Calculator
DR This question included the instruction: In this question you must show detailed reasoning.H230/01 Mark Scheme October 2021
3
2. Subject-specific Marking Instructions for A Level Mathematics A
a Annotations must be used during your marking. For a response awarded zero (or full) marks a single appropriate annotation (cross, tick, M0 or ^)
is sufficient, but not required.
For responses that are not awarded either 0 or full marks, you must make it clear how you have arrived at the mark you have awarded and all
responses must have enough annotation for a reviewer to decide if the mark awarded is correct without having to mark it independently.
It is vital that you annotate standardisation scripts fully to show how the marks have been awarded.
Award NR (No Response)
- if there is nothing written at all in the answer space and no attempt elsewhere in the script
- OR if there is a comment which does not in any way relate to the question (e.g. ‘can’t do’, ‘don’t know’)
- OR if there is a mark (e.g. a dash, a question mark, a picture) which isn’t an attempt at the question.
Note: Award 0 marks only for an attempt that earns no credit (including copying out the question).
If a candidate uses the answer space for one question to answer another, for example using the space for 8(b) to answer 8(a), then give benefit of
doubt unless it is ambiguous for which part it is intended.
b An element of professional judgement is required in the marking of any written paper. Remember that the mark scheme is designed to assist in
marking incorrect solutions. Correct solutions leading to correct answers are awarded full marks but work must not always be judged on the
answer alone, and answers that are given in the question, especially, must be validly obtained; key steps in the working must always be looked at
and anything unfamiliar must be investigated thoroughly. Correct but unfamiliar or unexpected methods are often signalled by a correct result
following an apparently incorrect method. Such work must be carefully assessed. When a candidate adopts a method which does not correspond
to the mark scheme, escalate the question to your Team Leader who will decide on a course of action with the Principal Examiner.
If you are in any doubt whatsoever you should contact your Team Leader.H230/01 Mark Scheme October 2021
4
c The following types of marks are available.
M
A suitable method has been selected and applied in a manner which shows that the method is essentially understood. Method marks are not
usually lost for numerical errors, algebraic slips or errors in units. However, it is not usually sufficient for a candidate just to indicate an intention of
using some method or just to quote a formula; the formula or idea must be applied to the specific problem in hand, e.g. by substituting the relevant
quantities into the formula. In some cases the nature of the errors allowed for the award of an M mark may be specified.
A method mark may usually be implied by a correct answer unless the question includes the DR statement, the command words “Determine” or
“Show that”, or some other indication that the method must be given explicitly.
A
Accuracy mark, awarded for a correct answer or intermediate step correctly obtained. Accuracy marks cannot be given unless the associated
Method mark is earned (or implied). Therefore M0 A1 cannot ever be awarded.
B
Mark for a correct result or statement independent of Method marks.
Unless otherwise indicated, marks once gained cannot subsequently be lost, e.g. wrong working following a correct form of answer is ignored.
Sometimes this is reinforced in the mark scheme by the abbreviation isw. However, this would not apply to a case where a candidate passes
through the correct answer as part of a wrong argument.
d When a part of a question has two or more ‘method’ steps, the M marks are in principle independent unless the scheme specifically says
otherwise; and similarly where there are several B marks allocated. (The notation ‘dep*’ is used to indicate that a particular mark is dependent on
an earlier, asterisked, mark in the scheme.) Of course, in practice it may happen that when a candidate has once gone wrong in a part of a
question, the work from there on is worthless so that no more marks can sensibly be given. On the other hand, when two or more steps are
successfully run together by the candidate, the earlier marks are implied and full credit must be given.
e The abbreviation FT implies that the A or B mark indicated is allowed for work correctly following on from previously incorrect results. Otherwise, A
and B marks are given for correct work only – differences in notation are of course permitted. A (accuracy) marks are not given for answers
obtained from incorrect working. When A or B marks are awarded for work at an intermediate stage of a solution, there may be various
alternatives that are equally acceptable. In such cases, what is acceptable will be detailed in the mark scheme. If this is not the case please,
escalate the question to your Team Leader who will decide on a course of action with the Principal Examiner.
Sometimes the answer to one part of a question is used in a later part of the same question. In this case, A marks will often be ‘follow through’. In
such cases you must ensure that you refer back to the answer of the previous part question even if this is not shown within the image zone. You
may find it easier to mark follow through questions candidate-by-candidate rather than question-by-question.H230/01 Mark Scheme October 2021
5
f We are usually quite flexible about the accuracy to which the final answer is expressed; over-specification is usually only penalised where the
scheme explicitly says so.
• When a value is given in the paper only accept an answer correct to at least as many significant figures as the given value.
• When a value is not given in the paper accept any answer that agrees with the correct value to 3 s.f. unless a different level of accuracy
has been asked for in the question, or the mark scheme specifies an acceptable range.
NB for Specification B (MEI) the rubric is not specific about the level of accuracy required, so this statement reads “2 s.f”.
Follow through should be used so that only one mark in any question is lost for each distinct accuracy error.
Candidates using a value of 9.80, 9.81 or 10 for g should usually be penalised for any final accuracy marks which do not agree to the value found
with 9.8 which is given in the rubric.
g Rules for replaced work and multiple attempts:
• If one attempt is clearly indicated as the one to mark, or only one is left uncrossed out, then mark that attempt and ignore the others.
• If more than one attempt is left not crossed out, then mark the last attempt unless it only repeats part of the first attempt or is substantially
less complete.
• if a candidate crosses out all of their attempts, the assessor should attempt to mark the crossed out answer(s) as above and award marks
appropriately.
h For a genuine misreading (of numbers or symbols) which is such that the object and the difficulty of the question remain unaltered, mark
according to the scheme but following through from the candidate’s data. A penalty is then applied; 1 mark is generally appropriate, though this
may differ for some units. This is achieved by withholding one A or B mark in the question. Marks designated as cao may be awarded as long as
there are no other errors.
If a candidate corrects the misread in a later part, do not continue to follow through. Note that a miscopy of the candidate’s own working is not a
misread but an accuracy error.
i If a calculator is used, some answers may be obtained with little or no working visible. Allow full marks for correct answers, provided that there is
nothing in the wording of the question specifying that analytical methods are required such as the bold “In this question you must show detailed
reasoning”, or the command words “Show” or “Determine”. Where an answer is wrong but there is some evidence of method, allow appropriate
method marks. Wrong answers with no supporting method score zero. If in doubt, consult your Team Leader.
j If in any case the scheme operates with considerable unfairness consult your Team Leader.H230/01 Mark Scheme October 2021
6
Question Answer Marks Guidance
1 (a) 12 × 3 × 4 × sin 30 M1
= 3 A1
[2]
(b) AC2 = 32 + 42 – 2×3×4×cos 30o (= 4.22) M1 or AC = 3 4 2 3 4 cos30 2 2 + − × × × o Correct expression AC2 or AC
AC = 2.05 (3 sf) A1
[2]
(c) sin sin30 3 their2.05 C = oe eg sin sin30 3C = 4.22 M1 Correct sin rule using their (b)
ACB = sin–1 ( 3sin30
their2.05 ) (= sin−10.73…) M1 Attempt inverse sine of their(b) 3sin30 . May be implied by answer
32 = ‘2.05’2 + 42 − 2ב2.05’×4×cosACB M1 Correct cos rule using their (b)
ACB = cos−1
2 2 2
'2.05' 4 3
2 '2.05' 4
+ −
× × M1 Attempt inverse cos of
2 2 2
'2.05' 4 3
2 '2.05' 4
+ −
× ×
. May be implied by answer
ACB = 46.9o or 47.0° or 47.1o (3 sf) A1ft Allow 47° Condone premature rounding. FT their (b)
[3]
2
dndt
M1 Attempt differentiate
= –5000t–2 A1
At t = 5, d
ndt
=
5000
25
−
ISW M1 Substitute t = 5 into their d
ndt
which must include t−2
(Rate of change of n is ) –200 A1
[4]
3 (a) x < 1 B1 Any notation Allow 0.4 < x < 1
2 < x < 3 B1 Any notation. Lose only one B1 if < seen instead of <
{x: x < 1} {x: 2 < x < 3} B1f ft their (i) dep at least two ranges; allow <
[3] SC: (MR ‘>’) 1 < x < 2; x > 3 B0B1 {x: 1 < x < 2} {x: x > 3} B1
3 (b) Attempt reflect in y-axis M1 Approx correct shape, orientation & location
Through (-3, 0.5), (-2, 0.5), (-1, 0.5), (-0.5, -1.5) A1 Allow ± 2mm SC. All four points plotted ± 2mm: B1
[2]H230/01 Mark Scheme October 2021
7
3 (c) Curve intersects x-axis only once B1 oe
[1]
4 (a)
15
12
−
or 15i − 12j B1
B1 B1 for each element. Allow i, j notation without “squiggles”
[1]
4 (b) 6r – s = 0 M1
s = 6r
02 + (9r)2 = 9 M1 Attempt |a|2 = 9, or |a| = 3; allow in terms of both r and s
81r2 = 9 A1
r = ± 1
3 A1 Allow just r = 13
r = 1
3 and s = 2 or r = – 13 and s = –2 A1 Correctly paired
[5]
5 (a) Maximum speed of the car B1 or, eg, doesn't drive faster than 80, or speed limit
or model will show consumption eventually
becoming negative Condone eg “Maximum number of miles car can drive”
or model may not apply for above 80 mph [1]
5 (b) d 5 125 d 3 v ( ) 12 v v − 2 = 0 ( ⇒ − = 12 5 125 6v 0 ) M1 Attempt differentiate C & equate to 0
v = 50 A1
2 2
d 3 12 2
5 125
d
( )
v
v v − = 6
− 125 when v = 50
or any correct method showing that SP is a
maximum
M1 Must be correct
Maximum speed is 50 mph A1 Units essential. Dep only on 1st M1H230/01 Mark Scheme October 2021
8
5 (b)
ctd Alternative method 1
v =
b2a
− (=
12
5
2 ( 3)
125
× −
− ) Attempt complete square M1
v = 50 A1
Coefficient of v2 negative, hence stationary
point is a maximum M1
Maximum speed is 50 mph A1 Units essential
Alternative method 2
12 3 2
5 125 v v − = 0 (v = 0 or 100) & M1 Working must be seen
Correct sketch graph & v = 50 B1 NB. This mark can be gained without working to justify the graph.
v = 50 seen on graph as giving maximum M1
Maximum speed is 50 mph A1 Units essential
[4]
5 (c) v = 0 does not give C = 0 oe B1 They will not consume fuel at 0 mph oe
[1]
5 (d) eg k( 12 5 125 v v − 3 2 ) B1 or "Increase both constants by the same factor" B1B1
with any k > 1 B1 or with numerical value of k (> 1) B1B1
SC: “Increase both constants” B1B0
Alternative method
eg (1 + k)( 12 3 2
5 125 v v − ) B1
where k > 0 B1
[2]H230/01 Mark Scheme October 2021
9
6 k = 503
3.6
or 3125
2916 or 1.07(167) M1 Attempt find k. Must involve division, and cube or cube root
Can be implied by 1.07 seen, or correct v
‘1.07’v3 = 225 or v3 = 225
'1.07' oe
or v = 3 225
'1.07167'
M1 or v = 3 225
their k oe SC k = 502
3.6
oe Max M1M0A0
Alternative Method
3
3
225
50
3.6
v
=
M1 Attempt use proportion. Must involve cube or cube root
3 225
3.6 50
v
= or v = 3 225
3.6× 50 M1 Correct expression for v
v = 5.94 (3 sf) A1 Allow without units
(Wind speed = 5.94 m/s) [3]
7 (a) Plot log P against log Q B1 Either way round
[1]
7 (b) log Q = log a + n log P (Draw a line of best fit)
So plotting log P against log Q gives a
straight line Y = m X + c with gradient n
M1 Comparison with Y = mX + c
Y = log Q and X = log P A1 Clarify which way round
[2]
8 (a) 23 < 32 B1 or eg 23 > 32, 8 > 9 Not true. Allow if poorly expressed.
[1]
8 (b) n(n + 2) + 1 M1
(= n2 + 2n + 1)
= (n + 1)2 A1
But n is odd so n + 1 is even, M1
so this is (even number)2 A1H230/01 Mark Scheme October 2021
10
8 (b)
ctd
Alternative Method 1
Let m = 2k – 1 and n = 2k + 1 Allow 2n – 1 and 2n + 1
where k is a positive integer M1 Condone omission of “where k is a positive integer”
(2k – 1)(2k + 1) + 1 M1
(= 4k2)
= (2k)2 or 22 × k2 A1
This is (even number)2 A1
Alternative Method 2
Let m = 2k + 1 and n = 2k + 3 Allow 2n + 1 and 2n + 3
where k is a positive integer M1 Condone omission of “where k is a positive integer”
(2k + 1)(2k + 3) + 1 M1
(= 4k2+8k+4 = 4(k2 + 2k + 1) )
= [2(k + 1)]2 or 22 × (k + 1)2 A1
This is (even number)2 A1
[4]
9 y = mx + 2 M1 seen or implied
mx + 2 = x2 – x + 6 M1 Attempt solve eqns of line and curve simultaneously
x2 – (m + 1)x + 4 = 0 A1
Equal roots, hence (m + 1)2 – 16 = 0 M1 Attempt use b2 – 4ac = 0
m = –5 inadmissible B1
m = 3
Equation is y = 3x + 2 A1
Alternative Method
grad of tangent = 2x – 1 M1 Must be correct
Where tgt touches curve y = (2x–1)x + 2 M1 Allow M1 for just y = (2x–1)x + 2 oe
Hence (2x – 1)x + 2 = x2 – x + 6 M1
x2 = 4 A1
x = –2 gives gradient = –5, so reject B1
x = 2 gives gradient = 3
Equation is y = 3x + 2 A1
[6]H230/01 Mark Scheme October 2021
11
Question Answer Marks Guidance
10 (a) (55) 115 (60) (230)
(65) (35) 70 170 B1 B1 for 10 correct numbers
120 (150) 130 (400) B1
[1]
10 (b) (i) 400 55 ISW or 80 11 or 0.1375 or 0.138 (3 sf) B1 NB If figures for A in the table are correct, but those for B and C are wrong, correct answers to parts (b)(i), (ii) can be obtained correctly.
[1]
10 (b) (ii) 120 55 ISW or 11 24 or 0.458 (3 sf) B1
[1]
10 (c) (i) Kareem because, eg the 2nd digit of each no.
is the same as the 1st digit of the next B1 oe. Allow Kareem because the numbers are not independent.
[1]
10 (c) (ii) Only 820 students or 850 > 820 B1 oe
[1]
11 (a) Those in age group 8 to 9 in 2001 will be in
age group 18 to 19 in 2011 B1 or, eg, "Same people" May be implied
[1]
11 (b) (i)
Few people joined (or left) this group oe
or "Not much change in this group"
or “Most have lived there since 2001”
B1
LAs with a high number of 8-9s in 2001 have a high number of 18-19s
in 2011
Most have stayed in the same area since childhood
[1]
11 (b) (ii)
(No) The nos of 18-19's in 2011 is (largely)
caused by the nos of 8-9s in 2001,
(but this cannot be inferred from the
correlation).
B1
[1]
(No) There is a link. They are the same people
Must state or imply that there is a link between x and y in this context.
11 (c) (i) 3 (or 4 or 5) of the highest five y-values B1 Must not include right-most point
[1]H230/01 Mark Scheme October 2021
12
Question Answer Marks Guidance
12 (a) n = 50; a = 5 6 , b = 16 ; or a = 16 , b = 5 6 , B1
[1] or ( 5 6 6 + 1)50 or ( 16 6 + 5)50
12 (b) H0: p = 1
6 allow 0.167 or 0.17 B1 One error, eg undefined p or 2-tail or H1: p > 16 : B1B0
H1: p < 1
6
p = P(dice shows a 2 (on any throw)
or p = proportion of 2s thrown
B1
[2]
Two errors, eg H1: p > 1
6 and undefined p: B0B0
Cannot be scored in part (c)
12 (c) B(50, 1
6 ) B1 stated or implied
Attempt P(X < a) for 1 < a < 20 M1
P(X < 4) = 0.0643 or P(X < 5) = 0.0643
P(X < 3) = 0.0238 A1 or P(X < 4) = 0.0238 Must see both probabilities correct
Rejection region is < 3 twos or < 4 twos A1 oe. Allow X < 3 or X < 4
Alternative method ft if 12(b) H1: p > 1
6
B(50, 1
6 ) B1 stated or implied
Attempt P(X > a) for 1 < a < 20 M1
P(X > 14) = 0.0307
P(X > 13) = 0.0627 A1 Must see both probabilities correct
Rejection region is > 14 twos or > 13 twos A1 oe. Allow X > 14 or X > 13
[4]
11 (c) (ii) In these LAs, the no. of 18-19s in 2011 is
more than the no. of 8-9s in 2001 B1 eg, the no. of people in this group in 2011 is more than it was in 2001 Students are aged 18+ so they cause an increase in this age group
In these LAs there are large numbers of 18+ [1] Allow numerical example. May be implied
Not just “These are outliers” oe
11 (d) Right most point indicated B1
[1]H230/01 Mark Scheme October 2021
13
13 (a) 1
12 + 14 + p + 3p = 1 M1
p = 1
6 A1
(2,3) (3,2) (3,3) M1 soi. Allow M1 for any two correct pairs and no incorrect pairs
or for all three correct pairs and at most one incorrect pair
16
× 1
2 + 12 × 16 + 12 × 12 M1 All correct and added, ft their p.
5
12 A1
[5]
13 (b) 12 (1 – 0.02) M1
= 0.49 A1
[2]OCR (Oxford Cambridge and RSA Examinations)
The Triangle Building
Shaftesbury Road
Cambridge
CB2 8EA
[Show More]