GCE
Mathematics B (MEI)
H630/02: Pure Mathematics and Statistics
Advanced Subsidiary GCE
Mark Scheme for November 2020
Oxford Cambridge and RSA Examinations
GCE
Mathematics B (MEI)
H630/02: Pure Mathematics and
...
GCE
Mathematics B (MEI)
H630/02: Pure Mathematics and Statistics
Advanced Subsidiary GCE
Mark Scheme for November 2020
Oxford Cambridge and RSA Examinations
GCE
Mathematics B (MEI)
H630/02: Pure Mathematics and Statistics
Advanced Subsidiary GCE
Mark Scheme for November 2020Oxford Cambridge and RSA Examinations
OCR (Oxford Cambridge and RSA) is a leading UK awarding body, providing a wide range of
qualifications to meet the needs of candidates of all ages and abilities. OCR qualifications
include AS/A Levels, Diplomas, GCSEs, Cambridge Nationals, Cambridge Technicals,
Functional Skills, Key Skills, Entry Level qualifications, NVQs and vocational qualifications in
areas such as IT, business, languages, teaching/training, administration and secretarial skills.
It is also responsible for developing new specifications to meet national requirements and the
needs of students and teachers. OCR is a not-for-profit organisation; any surplus made is
invested back into the establishment to help towards the development of qualifications and
support, which keep pace with the changing needs of today’s society.
This mark scheme is published as an aid to teachers and students, to indicate the requirements
of the examination. It shows the basis on which marks were awarded by examiners. It does not
indicate the details of the discussions which took place at an examiners’ meeting before marking
commenced.
All examiners are instructed that alternative correct answers and unexpected approaches in
candidates’ scripts must be given marks that fairly reflect the relevant knowledge and skills
demonstrated.
Mark schemes should be read in conjunction with the published question papers and the report
on the examination.
© OCR 2020H630/02 Mark Scheme June 2020
2
Text Instructions
Annotations and abbreviations
Annotation in scoris Meaning
and
BOD Benefit of doubt
FT Follow through
ISW Ignore subsequent working
M0, M1 Method mark awarded 0, 1
A0, A1 Accuracy mark awarded 0, 1
B0, B1 Independent mark awarded 0, 1
E Explanation mark 1
SC Special case
^ Omission sign
MR Misread
BP Blank page
Highlighting
Other abbreviations in
mark scheme
Meaning
E1 Mark for explaining a result or establishing a given result
dep* Mark dependent on a previous mark, indicated by *. The * may be omitted if only previous M mark.
cao Correct answer only
oe Or equivalent
rot Rounded or truncated
soi Seen or implied
www Without wrong working
AG Answer given
awrt Anything which rounds to
BC By Calculator
DR This indicates that the instruction In this question you must show detailed reasoning appears in the question.H630/02 Mark Scheme November 2020
3
Subject-specific Marking Instructions for AS Level Mathematics B (MEI)
a Annotations must be used during your marking. For a response awarded zero (or full) marks a single appropriate annotation (cross, tick, M0 or ^) is
sufficient, but not required.
For responses that are not awarded either 0 or full marks, you must make it clear how you have arrived at the mark you have awarded and all responses
must have enough annotation for a reviewer to decide if the mark awarded is correct without having to mark it independently.
It is vital that you annotate standardisation scripts fully to show how the marks have been awarded.
Award NR (No Response)
- if there is nothing written at all in the answer space and no attempt elsewhere in the script
- OR if there is a comment which does not in any way relate to the question (e.g. ‘can’t do’, ‘don’t know’)
- OR if there is a mark (e.g. a dash, a question mark, a picture) which isn’t an attempt at the question.
Note: Award 0 marks only for an attempt that earns no credit (including copying out the question).
If a candidate uses the answer space for one question to answer another, for example using the space for 8(b) to answer 8(a), then give benefit of doubt
unless it is ambiguous for which part it is intended.
b An element of professional judgement is required in the marking of any written paper. Remember that the mark scheme is designed to assist in marking
incorrect solutions. Correct solutions leading to correct answers are awarded full marks but work must not always be judged on the answer alone, and
answers that are given in the question, especially, must be validly obtained; key steps in the working must always be looked at and anything unfamiliar
must be investigated thoroughly. Correct but unfamiliar or unexpected methods are often signalled by a correct result following an apparently incorrect
method. Such work must be carefully assessed. When a candidate adopts a method which does not correspond to the mark scheme, escalate the
question to your Team Leader who will decide on a course of action with the Principal Examiner.
If you are in any doubt whatsoever you should contact your Team Leader.H630/02 Mark Scheme November 2020
4
c The following types of marks are available.
M
A suitable method has been selected and applied in a manner which shows that the method is essentially understood. Method marks are not usually lost
for numerical errors, algebraic slips or errors in units. However, it is not usually sufficient for a candidate just to indicate an intention of using some method
or just to quote a formula; the formula or idea must be applied to the specific problem in hand, e.g. by substituting the relevant quantities into the formula.
In some cases the nature of the errors allowed for the award of an M mark may be specified.
A method mark may usually be implied by a correct answer unless the question includes the DR statement, the command words “Determine” or “Show
that”, or some other indication that the method must be given explicitly.
A
Accuracy mark, awarded for a correct answer or intermediate step correctly obtained. Accuracy marks cannot be given unless the associated Method
mark is earned (or implied). Therefore M0 A1 cannot ever be awarded.
B
Mark for a correct result or statement independent of Method marks.
E
A given result is to be established or a result has to be explained. This usually requires more working or explanation than the establishment of an
unknown result.
Unless otherwise indicated, marks once gained cannot subsequently be lost, e.g. wrong working following a correct form of answer is ignored. Sometimes
this is reinforced in the mark scheme by the abbreviation isw. However, this would not apply to a case where a candidate passes through the correct
answer as part of a wrong argument.
d When a part of a question has two or more ‘method’ steps, the M marks are in principle independent unless the scheme specifically says otherwise; and
similarly where there are several B marks allocated. (The notation ‘dep*’ is used to indicate that a particular mark is dependent on an earlier, asterisked,
mark in the scheme.) Of course, in practice it may happen that when a candidate has once gone wrong in a part of a question, the work from there on is
worthless so that no more marks can sensibly be given. On the other hand, when two or more steps are successfully run together by the candidate, the
earlier marks are implied and full credit must be given.
e The abbreviation FT implies that the A or B mark indicated is allowed for work correctly following on from previously incorrect results. Otherwise, A and B
marks are given for correct work only – differences in notation are of course permitted. A (accuracy) marks are not given for answers obtained from
incorrect working. When A or B marks are awarded for work at an intermediate stage of a solution, there may be various alternatives that are equally
acceptable. In such cases, what is acceptable will be detailed in the mark scheme. If this is not the case, please escalate the question to your Team
Leader who will decide on a course of action with the Principal Examiner.
Sometimes the answer to one part of a question is used in a later part of the same question. In this case, A marks will often be ‘follow through’. In such
cases you must ensure that you refer back to the answer of the previous part question even if this is not shown within the image zone. You may find it
easier to mark follow through questions candidate-by-candidate rather than question-by-question.H630/02 Mark Scheme November 2020
5
f Unless units are specifically requested, there is no penalty for wrong or missing units as long as the answer is numerically correct and expressed either in
SI or in the units of the question. (e.g. lengths will be assumed to be in metres unless in a particular question all the lengths are in km, when this would be
assumed to be the unspecified unit.)
We are usually quite flexible about the accuracy to which the final answer is expressed; over-specification is usually only penalised where the scheme
explicitly says so.
• When a value is given in the paper only accept an answer correct to at least as many significant figures as the given value.
• When a value is not given in the paper accept any answer that agrees with the correct value to 2 s.f. unless a different level of accuracy has
been asked for in the question, or the mark scheme specifies an acceptable range.
NB for Specification A the rubric specifies 3 s.f. as standard, so this statement reads “3 s.f”
Follow through should be used so that only one mark in any question is lost for each distinct accuracy error.
Candidates using a value of 9.80, 9.81 or 10 for g should usually be penalised for any final accuracy marks which do not agree to the value found with 9.8
which is given in the rubric.
g Rules for replaced work and multiple attempts:
• If one attempt is clearly indicated as the one to mark, or only one is left uncrossed out, then mark that attempt and ignore the others.
• If more than one attempt is left not crossed out, then mark the last attempt unless it only repeats part of the first attempt or is substantially less
complete.
• if a candidate crosses out all of their attempts, the assessor should attempt to mark the crossed out answer(s) as above and award marks
appropriately.
h For a genuine misreading (of numbers or symbols) which is such that the object and the difficulty of the question remain unaltered, mark according to the
scheme but following through from the candidate’s data. A penalty is then applied; 1 mark is generally appropriate, though this may differ for some units.
This is achieved by withholding one A or B mark in the question. Marks designated as cao may be awarded as long as there are no other errors. If a
candidate corrects the misread in a later part, do not continue to follow through. E marks are lost unless, by chance, the given results are established by
equivalent working. Note that a miscopy of the candidate’s own working is not a misread but an accuracy error.
i If a calculator is used, some answers may be obtained with little or no working visible. Allow full marks for correct answers provided that there is nothing in
the wording of the question specifying that analytical methods are required such as the bold “In this question you must show detailed reasoning”, or the
command words “Show” and “Determine. Where an answer is wrong but there is some evidence of method, allow appropriate method marks. Wrong
answers with no supporting method score zero. If in doubt, consult your Team Leader.
j If in any case the scheme operates with considerable unfairness consult your Team Leader.H630/02 Mark Scheme November 2020
6
Question Answer Marks AOs Guidance
1
eg 2x ‒ 6x < ‒ 3 ‒ 5
x > 2
M1
A1
[2]
1.1a
1.1
Rearrange to get x terms on one side;
number terms on other. Allow one
sign error; allow one arithmetic error,
allow wrong inequality (or equality)
sign for M1
Expect to see 4x > 8
2 (a)
Diagram A is incorrect
the cumulative frequencies have been plotted at
the left hand end of each class interval, not at the
right hand end
B1
B1
[2]
2.2a
2.3
Accept diagram B is correct
Oe, eg Used lower bound not
upper bound
2 (b)
35.7 to 35.9 inclusive B1
[1]
1.1 From diagram, but ignore any
calculation; allow even if wrong
diagram given in (a).
If they say Diagram B is
incorrect oe in (a), allow sc
B1 for 34.7 to 34.9 inclusive
3 (a)
Quota sampling B1
[1]
1.2
3 (b)
non-random B1
[1]
2.4 Or equivalent Accept ‘the procedure is
biased’, but not ‘those
chosen might be biased’ or
‘tedious’. Ignore extra parts
of explanation.
3 (c)
Positive skew B1
[1]
1.2H630/02 Mark Scheme November 2020
7
Question Answer Marks AOs Guidance
3 (d) mean is 1.67
sd is 1.31
B1
B1
[2]
1.1
1.1
CAO
CAO Do not allow 1.30 or 1.3
3 (e)
20 B1
[1]
1.1 NB 44 × 100 220
3 (f)
(means very similar so) average number of
portions of fruit consumed per child is similar to
average number of portions of fruits consumed per
adult
(sd for children is lower so) less variability in
number of portions of fruit consumed per day by
children
B1
B1
[2]
2.2a
2.5
Condone mean for children is
(slightly) less than for adults BUT
must be in context of portions of fruit
ft from (d); answers must be
consistent with their answers
to (d) and must both be in
context
4 (a)
0.0348 B1
[1]
1.1 BC 0.03482475 Allow if seen correct to at
least 3 sf. We do not want to
penalize wrong rounding too
often
4 (b)
P( 4) 0.013(337876...) X ≤ = or
P(� ≤ 3) = 0.004(09062.. . ) found
M1 3.1a Accept P(� ≤ 4) > 0.01 or
P(� ≤ 3) < 0.01
Hence 4 is not in CR, or 3 is in CR M1 2.2a Allow M1 for one (correct) of these.
so CR is {0,1,2,3} or � ≤ 3 A1
[3]
3.2a Both probabilities must be correctH630/02 Mark Scheme November 2020
8
Question Answer Marks AOs Guidance
5 (a) 1
8
×
1 7
1
56
M1
A1
[2]
1.1a
1.1
or
6!
8!
oe
CAO accept 0.0179 0.017857142
5 (b) 5C3 or 5C2 × 3C1 seen [ 10, 30 ]
8C3 is denominator [ 56 ] {equiv to 8C5}
P(3, 0) + P(2, 1) attempted
5 7
alternatively 5
8
×
4 7
×
3 6
or 3 × 5
8
×
4 7
×
3 6
seen
both correct including ×3
P(3, 0) + P(2, 1) attempted
5 7
M1
B1
M1
A1
[4]
M1
A1
M1
A1
[4]
1.1a
1.1
2.1
1.1
1.1a
1.1
2.1
1.1
OR 3W 10 ways
2W1M 10x3 = 30 ways
1W2M 5x3 = 15 ways
3M 1 way
So 10+30
10+30+15+1 =
5 7
60
336 or
5
28 or
180
336or
15
28
Allow even if ×3 missing
Allow M1 if the 2 cases are
identified and added,
whatever the calculation.
Allow method by subtraction
from 1.
This question can be done by
tree diagram, with similar
working.
Allow both M marks for all
denoms 8 – eg 5
8
×
4 8
×
3 8
=
60
512
etc leading to 15
32H630/02 Mark Scheme November 2020
9
Question Answer Marks AOs Guidance
6
( 3 2 5 7 3 d )
b a
∫ x x x x − + − M1 2.1 All three brackets expanded. Allow sign errors and one coefficient error Must be 4 term cubic
A1 1.1 All correct
a = 1 and b = 3 B1 2.2a
F[x] =
4 3 2
5 7
3
4 3 2
x x x
− + − x
M1 1.1 integration of their expanded
brackets; condone +c Allow sign
errors and one coefficient error
Later M marks both dep on
first M1
F [3] ‒ F[1] evaluated M1 1.1 Subst seen, allow sign or num slip
�81 4 − 45 + 63 2 − 9� − �1 4 − 5 3 + 7 2 − 3� �− 9 4� − �− 11 12�
= −
4 3
so required area is │‒ 4 3 │= 4 3 AG A1 2.4 Sign change must be seen; no
reliance on decimals
[6]H630/02 Mark Scheme November 2020
10
Question Answer Marks AOs Guidance
7
Circle: equation is (x y − + + = 2 1 5 )2 2 ( ) 2 oe M1
A1
1.1
1.1
Allow sign error, reversed 1 and −2,
5 not squared.
Line: m = 1
2
B1 1.1
1
5 (their )( 9) oe
2
y x − = −
M1 1.1a Or � − 1 = (their 1
2
)(� − 1) Sight of y = ½(x + 1)
Substitution of their y = ½(x + 1) in their attempt
at equation of circle
M1 3.1a Or their x = 2y ‒ 1
5�2 − 10� − 75 = 0 oe A1 1.1
Or 5 10 15 0 y y 2 − − = oe �2 − 2� − 15 = 0
x = 5 or x = ‒ 3 A1 1.1 Or y = 3 and y = ‒ 1
(5, 3) and (‒ 3, ‒ 1) A1 2.5 If A0A0, sc1 for (5, 3) or (‒ 3, ‒ 1)
only
[8]H630/02 Mark Scheme November 2020
11
Question Answer Marks AOs Guidance
8
sin
3cos 8 [ 0]
cos
θ
θ
θ
+ =
23cos 8sin 0θ θ+ = 2
3(1 sin 8sin 0 − + = θ) θ
3sin 8sin 3 0 2θ − θ − =
sin � = − 1
3
www
θ = 341, 199
M1*
M1dep*
M1
A1
A1
A1
[6]
1.2
1.1
2.4
1.1
1.1a
2.4
multiplication of all terms of their
equation by cosθ
dependent on award of previous M1
from factorising or quadratic
formula
No wrong values; accept 199.47,
340.53
Condone sign errors and
number errors for the three
M marks
May see sin� = 3
9 (a) 1
Ax 2
−
(+/−)
12
Bx
12
12 x
x
−
M1
M1
A1
[3]
1.1
1.1
1.1 allow equivalent in index form, but
coefficients must be 12 and ‒ 12 Accept mixed, eg
12�−0.5 − 12√�H630/02 Mark Scheme November 2020
12
Question Answer Marks AOs Guidance
9 (b)
their d�
d� = 0 seen
x = 1
y = 32
M1
A1
A1
[3]
3.1a
1.1
1.1
9 (c) 2
2
d
their 1 substituted in their
d
y
x
= ‒ 12 so (1, 32) is a (local) maximum
M1
A1
[2]
3.1a
3.2a
NB
3 1
6 6 x x 2 2
− −
− −
allow explanation that for x > 0 both
terms in 2nd derivative are negative
so must be a local maximum; 2nd
derivative must be correct for this
approach
Alternatively, substitution of
their 1 ±δ in their d�
d� (either)
Correct values obtained for
d�
d� and correct conlusion
made
10 (a) Mass = 23.56 × 1.8162
= 77.7 [kg]
M1
A1
[2]
1.1
1.1
Allow M1 for cm used here
CAO
10 (b) Positive [correlation] B1
[1]
1.1 Ignore, eg, weak or strong Accept ‘as age increases so
does BMI’ oe
10 (c) 28 ≤ BMI < 30 B1
[1]
3.4
10 (d) extrapolation B1
[1]
3.5b Or equivalentH630/02 Mark Scheme November 2020
13
Question Answer Marks AOs Guidance
10 (e) eg females in population
wider age range in population
scatter diagram for whole population shows very
weak negative correlation
B1
B1
[2]
2.2b
2.2b
any two distinct comments
10 (f) Eg Generate a random number, n, between 1 and
(eg 20) inclusive and select the nth item in the
data set OR select every mth (eg 16th value).
For valid solution.
M1
A1
[2]
1.2
1.1
Random no between 1 and 9 and
every 17th item would also work.
Random no between 1 and
31, and then every 15th item
also works, etc.
11 (a) A = 11
Substitution of t = 3 and V = 13.8
B = 7.0
B1
M1
A1
[3]
1.1
3.3
1.1
from t = 0 and V = 11
13.8 = �+ �(1− �−0.17×3)
Allow 7, 7.01, 7.009, etc
Implied by 7.0086
11 (b)
t = 4 and V = 14.453681053…to 1 or more dp
good fit
t = 5 and V = 15.008095476..to 1 or more dp good
fit
B1
B1
[2]
3.4
1.1
allow SC1 for two correct values
with no comment or incorrect
comment(s)
If B0B0, allow sc M1 for subst with
their values.
Allow full marks if more
accurate value of B used –
14.458 and 15.013
11 (c) d�
d� = their 7.0 × 0.17 e‒ 0.85
0.509 ms‒2
M1
A1
[2]
3.1a
1.1
Allow for their 7.0 × 0.17 e‒ 0.17t;
condone use of 7.0086 for BH630/02 Mark Scheme November 2020
14
Question Answer Marks AOs Guidance
11 (d)
t → ∞, V → 11 + 7 oe
their 18 × 3.6
64.8 > 60 so the motorist is fined
M1
M1
A1
[3]
3.3
1.1
3.5a
Allow ft from (a) for M1M1
Allow for any attempt to change to
km/hr, accept use of ‘their 18’
Need to show 64.8 > 60 for full
marksOCR (Oxford Cambridge and RSA Examinations)
The Triangle Building
Shaftesbury Road
Cambridge
CB2 8EA
[Show More]