GCE
Physics B
H557/02: Scientific literacy in physics
Advanced GCE
Mark Scheme for November 2020
Oxford Cambridge and RSA Examinations
GCE
Physics B
H557/02: Scientific literacy in physics
Advanced GCE
Mark S
...
GCE
Physics B
H557/02: Scientific literacy in physics
Advanced GCE
Mark Scheme for November 2020
Oxford Cambridge and RSA Examinations
GCE
Physics B
H557/02: Scientific literacy in physics
Advanced GCE
Mark Scheme for November 2020Oxford Cambridge and RSA Examinations
OCR (Oxford Cambridge and RSA) is a leading UK awarding body, providing a wide range of
qualifications to meet the needs of candidates of all ages and abilities. OCR qualifications
include AS/A Levels, Diplomas, GCSEs, Cambridge Nationals, Cambridge Technicals,
Functional Skills, Key Skills, Entry Level qualifications, NVQs and vocational qualifications in
areas such as IT, business, languages, teaching/training, administration and secretarial skills.
It is also responsible for developing new specifications to meet national requirements and the
needs of students and teachers. OCR is a not-for-profit organisation; any surplus made is
invested back into the establishment to help towards the development of qualifications and
support, which keep pace with the changing needs of today’s society.
This mark scheme is published as an aid to teachers and students, to indicate the requirements
of the examination. It shows the basis on which marks were awarded by examiners. It does not
indicate the details of the discussions which took place at an examiners’ meeting before marking
commenced.
All examiners are instructed that alternative correct answers and unexpected approaches in
candidates’ scripts must be given marks that fairly reflect the relevant knowledge and skills
demonstrated.
Mark schemes should be read in conjunction with the published question papers and the report
on the examination.
© OCR 2020H557/02 Mark Scheme November 2020
Annotations
Annotation Meaning
Benefit of doubt given
Contradiction
Incorrect response
Error carried forward
Level 1
Level 2
Level 3
Transcription error
Benefit of doubt not given
Power of 10 error
Omission mark
Error in number of significant figures
Correct response
Wrong physics or equationH557/02 Mark Scheme November 2020
Abbreviations, annotations and conventions used in the detailed Mark Scheme (to include abbreviations and subject-specific conventions).
Annotation Meaning
/ alternative and acceptable answers for the same marking point
reject Answers which are not worthy of credit
not Answers which are not worthy of credit
Ignore Statements which are irrelevant
Allow Answers that can be accepted
( ) Words which are not essential to gain credit
__ Underlined words must be present in answer to score a mark
ECF Error carried forward
AW Alternative wording
ORA Or reverse argumentH557/02 Mark Scheme November 2020
Question Answer Marks Guidance
1 a i Data logger allow higher frequency of p.d. readings/reading
a (changing) voltmeter would introduce greater
uncertainty/datalogger timing will be precise
1
Don’t accept bald ‘more accurate’ or ‘less
uncertainty’
ii Either: 0.63V0 = 2.8 V (1),
time taken to reach this value (� ), 2.3 s <τ < 2.4 s (1)
giving C between 450 and 480 µF (1)
Or:
Use of � = �0(1 − �−
�
�� )
Correct pair of V and t (1)
Correct rearrangement to make C the subject(1)
Value = 470 µF (1)
3
Don’t accept answers from Q = It when I is
held constant.
Range at SSU
SSU to consider 1/e approximated to 1/3, i.e.
(2/3) V0 = 2.8 V (Haven’t seen this in first 20%
of scripts)
Range at SSU
e.g. V = 2.5 V at t = 2 s (1)
C = - 2/(5000 x ln(1 – 2.5/4.4) (1)
= 0.00047 F (1)
iii E = 0.5 x 5 x 10-4 x 4.22 (1)
= 0.0044 J (1) 2
Use either own value from a ii or 0.0005 F
b i Line of decreasing negative gradient starting at 4.2 V (1)
Gradient -0.5 x gradient of charging line at any time, by eye
(1)
Explanation: RC value in the discharge circuit is twice that of
the charging circuit. AW(1)
3
Accept any clearly lower magnitude of
gradient.
ii
E ∝ V 2 ⇒ p.d. when energy stored has halved = 4.2 V × √0.5
= 3.0 V (2.97 V) (1)
� = �0 �−
�
�� where R= 10 kΩ & C= 470 µF ⇒ RC = 4.7 s (1)
-t/4.7 s = ln(3.0 V/4.2 V)
-t = 4.7 s × -0.336 ⇒ t = 1.58 s = 1.6 s (1)
3
Range at SSU
Ecf from a iii if used
Or RC = double τ from (a)(ii)
If 500 x 10-6 F used, RC = 5 s leading to value
1.68/1.7 s.
Bald in-range answer gains all marksH557/02 Mark Scheme November 2020
Question Answer Marks Guidance
2 a 0.8/3 x 108 = 2.7 x 10-9 light seconds (1) 1 No s.f. penalty
b i Light (is observed to) travel a greater distance (1)
at the same velocity (1) 2 e.g. 2ct > 2cτ
ii �2� 2 = � 2� 2 + �2�2 (1)
� 2(1 − �2
�2) = �2 (1)
(leading to � =
�
�1− � �22 )
2
Expect intermediate stages. Any correct
routes gain both marks.
c � = 611
�1− ( (5 3..4 0 × ×1 10 07 8) )2 2 (1)
= 621 s (1)
2
Calculating γ to 1.017 gains first mark. Accept
answer rounded to 620 s.
d
For photon v = c so denominator (or �1− ��2 2 ) is zero/
gamma factor is infinite (1)
Therefore �/� ( = �) is zero (for any value of t) (1)
2
AW but both steps needed for first mark.
AWH557/02 Mark Scheme November 2020
Question Answer Marks Guidance
3 a wavelength of emitted light
= (6.63 x 10-34 x 3.00 x 108)/ (1.88 x 1.60 x 10-19) (1)
= 6.61 x 10-7 m (1) 2 Accept 2 or 3 s.f. No ecf from wrong value
used in calculation.
b i Linear graph with x-axis intercept of 1.25 ± 0.03 x 106 m-1
1 Examiner to extrapolate line if it doesn’t extend
to axis.
ii
ℎ =
��
�
gradient = Δ�/Δ�−1 = Δ� × ∆� (1)
� = �� (1)
(therefore, required equation)
2
Can get the second mark as a lone mark.
Accept lack of delta notation if algebra correct,
but working from Δ�/Δ�−1 needed0.
iii gradient working using x-interval of at least 0.4 x 106 m-1 (1)
gradient in range 1.0 x 10-6 to 1.2 x 10-6 (V m) (1)
h in range 5.3 x 10-34 to 6.4 x 10-34 (J s)(1)
3
Ecf from b i clear values from graph required
for first point
expected value = 1.1 x 10-6 V m
expected value = 5.9 x 10-34 J s
iv Steepest-possible value = 9.3 x 10-34 J s. (1)
Uncertainty = ± (9.3 – 5.9) x 10-34 = 3.4 x 10-34J s (1)
Answer given as 5.9 x 10-34 J s ± 3.4 x 10-34 J s (1)
3
ecf from (iii)
ecf from (iii)
Allow 3 sf in final answer and uncertainty. Sf
of value and uncertainty must match.Accept
1 s.f. uncertainty and valueH557/02 Mark Scheme November 2020
Question Answer Marks Guidance
Section B
4 a 1/3.85 x 10-3
= (+) 260 D (1) 1
b Waves will strike lens with curvature more negative than –
260D (1)
Curvature still negative (or zero) on leaving the lens (1) 2
accept attempt to calculate v using lens
equation plus comment on (non) result.
c for u = 1.2 m, v = 0.00386 m (1)
for u = 0.050 m, v = 0.0042 m(1)
In the first case the image is formed very close to the
sensitive surface, this is not so when u = 0.050 m (1)
3
Can’t use argument that power of the lens is
insufficient
Accept correct answers derived from u and v
confusion
d length on surface = (0.00385/0.35) x 0.090 (1)
= 9.9 x 10-4 m (1)
2
Or calculates magnification as 0.011 for first
mark
Accept rounding to 1(.0) x 10-3 m as long as
method clear
If u = 1.2 is used, one mark for correct answer,
2.9 x 10-4 m.
e length of pixel = (4.89 x 10-3 x 3.65 x 10-3/12 x 106)0.5 (1)
= 1.2 x 10-6 m (1)
Number of pixels along 9.9 x 10-4 m = 825 (1)
Resolution = 0.090/825 =1.1 x 10-4 m
4
First mark can be awarded for area of a pixel
calculated as 1.49 x 10-12/1.5 x 10-12 m.
If area of pixel is used to calculate resolution, no
marks.
f Increase brightness (1) changing each pixel by a fixed value
(until brightest pixel is coded at 255) (1)
OR
Increase contrast (1) stretching pixel values to cover full
range (1)
Benefit: improving images, removing noise, aesthetic
changes etc
Problems: pictures can be manipulated AW
4
Total 16H557/02 Mark Scheme November 2020
Question Answer Marks Guidance
5 a i k = (0.059 x 9.81)/(1.31 – 1.15)= 3.62 (~4 ) (1) 1
ii E = 0.5 x 3.62 x (1.31 – 1.15)2 (1)
= 0.046 J (1) 2
Iii Level 3 (5–6 marks)
Marshals argument in a clear manner. Clearly links
acceleration of the ball with the forces acting upon it
throughout the fall. Makes a clear statement of the position
of greatest velocity and calculates the maximum upwards
acceleration.
There is a well-developed line of reasoning which is clear
and logically structured. The information presented is
relevant and substantiated.
Level 2 (3–4 marks)
Gives a clear explanation of the motion of the ball but does
not consider forces or gives incomplete description including
forces. Makes some accurate quantitative statements.
There is a line of reasoning presented with some structure.
The information presented is relevant and supported by
some evidence.
Level 1 (1–2 marks)
Gives incomplete description which includes some correct
physics, for instance initial acceleration, position of
maximum velocity and position of maximum acceleration.
There is an attempt at a logical structure with a line of
reasoning. The information is in the most part relevant.
0 marks
No response or no response worthy of credit
6
Indicative scientific points may include:
• Acceleration = 9.81 m s-2 from release
until length of cord = 1.15 m
• as only force acting on ball is mg.
• Describes velocity increasing at a
decreasing rate until 1.31 m
• From 1.15 to 1.31 m acceleration is
decreasing
• as net force on ball = mg – kx
• Greatest velocity at 1.31 m
• From 1.31 m to 1.78 m the ball is
decelerating at an increasing rate
• as kx > mg and the upward force
increases as x increases
• maximum upwards acceleration
occurs at lowest point
• upwards acceleration = (kx – mg)/m;
• upwards acceleration
= ((3.62 x 0.63) - (0.059 x 9.81))/0.059
= 28.8 m s-2H557/02 Mark Scheme November 2020
Question Answer Marks Guidance
5 a iv Sensible, practicable suggestion (1)
Description of method (1)
2
E.g. video against a ruled background (1)
Analyse frame by frame (1)
NOT just ‘use a video camera’
OR
Place board on floor and move up until the
ball just touches the board at lowest point (1)
Judge by sight or sound
Measure distance (1)
b 4 points from:
• (Such a polymer is an example of) a long chain
molecule
• which can rotate about its bonds/untangle
• Bonds are strong so polymer has high breaking
stress
• Elastic region has relatively low k, reducing force on
bungee jumper
• Metal structure is an array of positive ions in a sea of
delocalised electrons
• Mobile dislocations lead to plastic behaviour
• Metals are only elastic for small strains as the
deforming force pulls bonds apart
• Plastic deformation occurs in metal for small strains
• Decelerating force on jumper would be very great as
metals have higher k
4
AW throughout. First and fourth bullet points
can be given diagrammatically.
total 15H557/02 Mark Scheme November 2020
Question Answer Marks Guidance
6 a i Starting height = 6.40 x 106 m & ending height = 7.225 x 106
m (1)
Change in Vgrav. is the area between the line and the axis
(bounded by the starting and ending height) (1)
Change in energy = change in Vgrav x 2300 kg. Value
between 1.55 x 1010 J and 1.75 x 1010 J (1)
3
Must show own value; from graph should be
~ 7.2 × 10 6 J kg -1.
Accept calculating to values of GM/r by
multiplying g values by r:
First mark for identifying heights correctly,
Second mark for method
Third mark for evaluation.
Candidate must show how the result is
achieved, even if a full explanation is not
present.
Accept ½ base x height calculations(plus
rectangle) giving answers of around 1.7 x 1010
J
Use of E = mgh is neutral in this case.
Calculated value = 1.64 x 1010 J
a ii 1.6 x 1010 = GMm�6.4 ×1106 − 7.2251×106� (1) = 1.78 x 10-8 GMm
M = 1.6 x 1010/(6.67 x 10-11 x 2300 x 1.78 x 10-8 ) (1)
= 5.8 x 1024 kg (≈ 6 × 10 24 kg) (1)
3
e.c.f. own answer to ai. Must show working but
steps in the working may be conflated.
b i
F = (−) 6.67 ×10−11×2300 ×6 ×1024
(7.225 ×106)2 (1)
= (-) 1.763 × 10 4 N = 1.8 x 104 N (1)0
2 Bald correct answer gains two marks. Allow ecf
from POT error in method – if clearly shown.
ii
v = √1.8 ×104×7.225 ×106
2300
= 7520 m s-1 (1)
T = 2� ×7.225 ×106
7520
(1)
= 6037 s = 6040 s (1)
OR
a = - ω2r
1.8 x 1044/2300 = 4πf2 x 7.225 x 106 (1)
3
Allow for rounding differences. Bald correct
answer gains three marks.
Ecf from b(i).
If 1.763 x 104 used, T = 6100 sH557/02 Mark Scheme November 2020
f2 = 2.74 x 10-8 (1)
f = 1.66 x 10-4 s-1
T = 6037 s (1)
OR
v = (GM/r)0.5 = 7520 m s-1 (1) for first mark
c Any three from:
Advantages to low polar orbit:
• High(er) resolution imaging AW
• Image more of the planet as the Earth spins
underneath the satellite
Geostationary:
• Remain at the same position in the sky so dishes can
keep locked on to signal AW
• Higher orbit means greater coverage
3
Not just ‘image more of planet’ or ‘see more
clearly’
Note stem of question informs candidates that
geostationary satellites are always above the
same point on the Earth’s surface.
total 14H557/02 Mark Scheme November 2020
Section C
Question Answer Marks Guidance
7 a 400 Hz (1) 1
b Highest frequency component = 800 Hz (1)
Need twice this to avoid aliasing (AW) (1)
Minimum sampling frequency = 1600 Hz (1)
3
The time period of the ‘wobble’ is ~ 0.0006 s.
This may lead students to a high frequency
component of 1670 Hz and therefore a
minimum frequency of around 3300 Hz. Two
marks max for this. (SSU) Can get the second
two marks from the wrong highest frequency
component. Two marks max for doubling the
frequency in (a)
c i Velocity increases whilst wavelength constant (1) 1 Need wavelength constant
ii 445
440
=
��2
√285 (1)
T2 = 291.5 Hz so temperature rise = 6.5 K (1)
2
Bald answer gains both marks
Accept 7 K
total 7H557/02 Mark Scheme November 2020
Question Answer Marks Guidance
8 a particle identified as anti-neutrino (1)
(No leptons on LHS of equation), anti-lepton (anti-neutrino)
balances lepton (electron) on RHS (1)
Electrons released in beta decay have range of energies,
(1) (the energy of the neutrino makes up the difference
between energy released and the energy of the electron)
3
AW
Mark for recognising the spectrum of energies
of electrons emitted.
b Using � = − � ln ���t 0�:
9000 = −5700
ln2 ln(1.4 ×�1t0−12) (1)
Ratio = 4.7 x 10-13 (1)
OR
λ = ln 2/5700 years = 1.216 × 10-4 year-1 (1)
Rt= R0 e - λ t
= 1.4 × 10 -12 exp(-1.216×10-4 year -1 × 9000 year)
= 4.7 × 10 -13 (1)
2
Other methods possible. Correct bald answer
gains both marks.
Accept 3.8 x 10-12 (s-1) for λH557/02 Mark Scheme November 2020
Question Answer Marks Guidance
8 c Level 3 (5–6 marks)
Marshals argument in a clear manner. Explains the idea of
‘old carbon’ released from volcanoes having lower 14C/12C
ratio than living material. Clearly explains the use of tree
ring data (which can also have its 14C/12C ratio measured)
and links use of tree ring data back to measurement of plant
age. Includes a clear and correct calculation of the effect of
‘old-carbon’ contamination.
There is a well-developed line of reasoning which is clear
and logically structured. The information presented is
relevant and substantiated.
Level 2 (3–4 marks)
Gives a clear and complete qualitative explanation of the
effect of old carbon and the use of tree ring data but the
calculation is incomplete or incorrect in some aspects.
There is a line of reasoning presented with some structure.
The information presented is relevant and supported by
some evidence.
Level 1 (1–2 marks)
Gives a description of the effect of old carbon and the use of
tree rings but the explanation is superficial or incomplete.
Calculation, if attempted, is limited or incorrect.
There is an attempt at a logical structure with a line of
reasoning. The information is in the most part relevant.
0 marks
No response or no response worthy of credit
6
Indicative scientific points may include:
• Carbon-14 originally present in volcanic
material has decayed
• Carbon from volcanoes combines with
oxygen to give carbon-dioxide which
plants take up (through photosynthesis)
• Take up of ancient carbon reduces
14C/12C ratio
• Reduced 14C/12C ratio suggests a
greater age
• Trees absorb CO2 during growth cycle
• Age of trees can be directly measured
by counting tree rings
• 14C/12C ratio in each ring can be
measured and compared with organic
material in the vicinity.
• Calculation:
• 10% ancient carbon will reduce 14C/12C
ratio to 1.26 x 10-12
• Apparent age = −5700
ln2 ln(11.26 .4 )
• Apparent age = 866 years (2 s.f.)
total 11H557/02 Mark Scheme November 2020
Question Answer Marks Guidance
9 a
� = �2��� = �2��� (= 2.50 × 10 -19 N s) (1)
r =
�2 ×2.33 ×10−26 ×4.2 ×106/3.2 × 10−19
0.72
(1)
= 1.1 m (2 s.f.) (1)
3
Other routes possible. Correct bald answer
gains three marks.
Correct calculation following incorrect velocity
value gains two marks ecf.
Double error in charge (giving v = 7.59 x 106 and
r = 1.54 gains two marks)
0
1.55 or 1.6 m gains two marks
(use of 1.6 x 10-19 rather than 3.2 x 10-19)
b These have the same mass as 14C (1)
and those with the same charge will be deflected the same
amount in the magnetic field, (1) producing spurious 14C
results.
2OCR (Oxford Cambridge and RSA Examinations)
The Triangle Building
Shaftesbury Road
Cambridge
CB2 8EA
[Show More]