Oxford Cambridge and RSA Examinations
GCE
Further Mathematics B (MEI)
Y414/01: Numerical Methods
Advanced Subsidiary GCE
Mark Scheme for November 2020Oxford Cambridge and RSA Examinations
OCR (Oxford Cambridge and
...
Oxford Cambridge and RSA Examinations
GCE
Further Mathematics B (MEI)
Y414/01: Numerical Methods
Advanced Subsidiary GCE
Mark Scheme for November 2020Oxford Cambridge and RSA Examinations
OCR (Oxford Cambridge and RSA) is a leading UK awarding body, providing a wide range of
qualifications to meet the needs of candidates of all ages and abilities. OCR qualifications
include AS/A Levels, Diplomas, GCSEs, Cambridge Nationals, Cambridge Technicals,
Functional Skills, Key Skills, Entry Level qualifications, NVQs and vocational qualifications in
areas such as IT, business, languages, teaching/training, administration and secretarial skills.
It is also responsible for developing new specifications to meet national requirements and the
needs of students and teachers. OCR is a not-for-profit organisation; any surplus made is
invested back into the establishment to help towards the development of qualifications and
support, which keep pace with the changing needs of today’s society.
This mark scheme is published as an aid to teachers and students, to indicate the requirements
of the examination. It shows the basis on which marks were awarded by examiners. It does not
indicate the details of the discussions which took place at an examiners’ meeting before marking
commenced.
All examiners are instructed that alternative correct answers and unexpected approaches in
candidates’ scripts must be given marks that fairly reflect the relevant knowledge and skills
demonstrated.
Mark schemes should be read in conjunction with the published question papers and the report
on the examination.
© OCR 2020Y414/01 Mark Scheme November 2020
Text Instructions
Annotations and abbreviations
Annotation in scoris Meaning
and
BOD Benefit of doubt
FT Follow through
ISW Ignore subsequent working
M0, M1 Method mark awarded 0, 1
A0, A1 Accuracy mark awarded 0, 1
B0, B1 Independent mark awarded 0, 1
E Explanation mark 1
SC Special case
^ Omission sign
MR Misread
BP Blank page
Highlighting
Other abbreviations in
mark scheme
Meaning
E1 Mark for explaining a result or establishing a given result
dep* Mark dependent on a previous mark, indicated by *. The * may be omitted if only previous M mark.
cao Correct answer only
oe Or equivalent
rot Rounded or truncated
soi Seen or implied
www Without wrong working
AG Answer given
awrt Anything which rounds to
BC By Calculator
DR This indicates that the instruction In this question you must show detailed reasoning appears in the question.Y414/01 Mark Scheme November 2020
3
Subject-specific Marking Instructions for AS Level Mathematics B (MEI)
a Annotations must be used during your marking. For a response awarded zero (or full) marks a single appropriate annotation (cross, tick, M0 or ^) is
sufficient, but not required.
For responses that are not awarded either 0 or full marks, you must make it clear how you have arrived at the mark you have awarded and all responses
must have enough annotation for a reviewer to decide if the mark awarded is correct without having to mark it independently.
It is vital that you annotate standardisation scripts fully to show how the marks have been awarded.
Award NR (No Response)
- if there is nothing written at all in the answer space and no attempt elsewhere in the script
- OR if there is a comment which does not in any way relate to the question (e.g. ‘can’t do’, ‘don’t know’)
- OR if there is a mark (e.g. a dash, a question mark, a picture) which isn’t an attempt at the question.
Note: Award 0 marks only for an attempt that earns no credit (including copying out the question).
If a candidate uses the answer space for one question to answer another, for example using the space for 8(b) to answer 8(a), then give benefit of doubt
unless it is ambiguous for which part it is intended.
b An element of professional judgement is required in the marking of any written paper. Remember that the mark scheme is designed to assist in marking
incorrect solutions. Correct solutions leading to correct answers are awarded full marks but work must not always be judged on the answer alone, and
answers that are given in the question, especially, must be validly obtained; key steps in the working must always be looked at and anything unfamiliar must
be investigated thoroughly. Correct but unfamiliar or unexpected methods are often signalled by a correct result following an apparently incorrect method.
Such work must be carefully assessed. When a candidate adopts a method which does not correspond to the mark scheme, escalate the question to your
Team Leader who will decide on a course of action with the Principal Examiner.
If you are in any doubt whatsoever you should contact your Team Leader.Y414/01 Mark Scheme November 2020
c The following types of marks are available.
M
A suitable method has been selected and applied in a manner which shows that the method is essentially understood. Method marks are not usually lost for
numerical errors, algebraic slips or errors in units. However, it is not usually sufficient for a candidate just to indicate an intention of using some method or
just to quote a formula; the formula or idea must be applied to the specific problem in hand, e.g. by substituting the relevant quantities into the formula. In
some cases the nature of the errors allowed for the award of an M mark may be specified.
A method mark may usually be implied by a correct answer unless the question includes the DR statement, the command words “Determine” or “Show
that”, or some other indication that the method must be given explicitly.
A
Accuracy mark, awarded for a correct answer or intermediate step correctly obtained. Accuracy marks cannot be given unless the associated Method mark
is earned (or implied). Therefore M0 A1 cannot ever be awarded.
B
Mark for a correct result or statement independent of Method marks.
E
A given result is to be established or a result has to be explained. This usually requires more working or explanation than the establishment of an unknown
result.
Unless otherwise indicated, marks once gained cannot subsequently be lost, e.g. wrong working following a correct form of answer is ignored. Sometimes
this is reinforced in the mark scheme by the abbreviation isw. However, this would not apply to a case where a candidate passes through the correct
answer as part of a wrong argument.
d When a part of a question has two or more ‘method’ steps, the M marks are in principle independent unless the scheme specifically says otherwise; and
similarly where there are several B marks allocated. (The notation ‘dep*’ is used to indicate that a particular mark is dependent on an earlier, asterisked,
mark in the scheme.) Of course, in practice it may happen that when a candidate has once gone wrong in a part of a question, the work from there on is
worthless so that no more marks can sensibly be given. On the other hand, when two or more steps are successfully run together by the candidate, the
earlier marks are implied and full credit must be given.
e The abbreviation FT implies that the A or B mark indicated is allowed for work correctly following on from previously incorrect results. Otherwise, A and B
marks are given for correct work only – differences in notation are of course permitted. A (accuracy) marks are not given for answers obtained from
incorrect working. When A or B marks are awarded for work at an intermediate stage of a solution, there may be various alternatives that are equally
acceptable. In such cases, what is acceptable will be detailed in the mark scheme. If this is not the case, please escalate the question to your Team Leader
who will decide on a course of action with the Principal Examiner.
Sometimes the answer to one part of a question is used in a later part of the same question. In this case, A marks will often be ‘follow through’. In such
cases you must ensure that you refer back to the answer of the previous part question even if this is not shown within the image zone. You may find it
easier to mark follow through questions candidate-by-candidate rather than question-by-question.Y414/01 Mark Scheme November 2020
5
f Unless units are specifically requested, there is no penalty for wrong or missing units as long as the answer is numerically correct and expressed either in
SI or in the units of the question. (e.g. lengths will be assumed to be in metres unless in a particular question all the lengths are in km, when this would be
assumed to be the unspecified unit.)
We are usually quite flexible about the accuracy to which the final answer is expressed; over-specification is usually only penalised where the scheme
explicitly says so.
• When a value is given in the paper only accept an answer correct to at least as many significant figures as the given value.
• When a value is not given in the paper accept any answer that agrees with the correct value to 2 s.f. unless a different level of accuracy has
been asked for in the question, or the mark scheme specifies an acceptable range.
NB for Specification A the rubric specifies 3 s.f. as standard, so this statement reads “3 s.f”
Follow through should be used so that only one mark in any question is lost for each distinct accuracy error.
Candidates using a value of 9.80, 9.81 or 10 for g should usually be penalised for any final accuracy marks which do not agree to the value found with 9.8
which is given in the rubric.
g Rules for replaced work and multiple attempts:
• If one attempt is clearly indicated as the one to mark, or only one is left uncrossed out, then mark that attempt and ignore the others.
• If more than one attempt is left not crossed out, then mark the last attempt unless it only repeats part of the first attempt or is substantially less
complete.
• if a candidate crosses out all of their attempts, the assessor should attempt to mark the crossed out answer(s) as above and award marks
appropriately.
h For a genuine misreading (of numbers or symbols) which is such that the object and the difficulty of the question remain unaltered, mark according to the
scheme but following through from the candidate’s data. A penalty is then applied; 1 mark is generally appropriate, though this may differ for some units.
This is achieved by withholding one A or B mark in the question. Marks designated as cao may be awarded as long as there are no other errors. If a
candidate corrects the misread in a later part, do not continue to follow through. E marks are lost unless, by chance, the given results are established by
equivalent working. Note that a miscopy of the candidate’s own working is not a misread but an accuracy error.
i If a calculator is used, some answers may be obtained with little or no working visible. Allow full marks for correct answers provided that there is nothing in
the wording of the question specifying that analytical methods are required such as the bold “In this question you must show detailed reasoning”, or the
command words “Show” and “Determine. Where an answer is wrong but there is some evidence of method, allow appropriate method marks. Wrong
answers with no supporting method score zero. If in doubt, consult your Team Leader.
j If in any case the scheme operates with considerable unfairness consult your Team Leader.Y414/01 Mark Scheme November 2020
Question Answer Marks AOs Guidance
1 (a) 0.410781 ‒ 0.793203
0.2
soi
‒ 1.9121 cao
M1
A1
[2]
1.1
1.1
allow slip in one of the function
values
1 (b) 0.410781 ‒0.968584
0.4
soi
‒ 1.3945 cao
M1
A1
[2]
1.1
1.1
allow slip in one of the function
values
1 (c)
B1
[1]
1.1
both intersections correct
1 (d)
3.139 × 10‒5 B1
[1]
2.5 allow 0.00003139
1 (e)
‒ 1.3553 since the two best estimates agree to
this precision
B1
[1]
2.4 allow
eg converging to ‒ 1.3553Y414/01 Mark Scheme November 2020
7
Question Answer Marks AOs Guidance
1 (f) (as h is halved) the ratios (of differences) tends
to 0.25
which shows that the order of convergence of
these estimates is second order, which is to be
expected
B1
B1
[2]
2.2a
1.2 allow eg 2nd order
2 (a) eg 1.040811 ‒ 1.045576
1.045576
soi
‒0.00456
‒0.00897
‒0.0264
M1
A1
A1
A1
[4]
1.1
1.1
1.1
1.1
allow if function values reversed
NB
allow full marks if allsigns
reversed; otherwise apply
a penalty of 1 mark from
full marks if signs
inconsistent
if A0 allow up to SC2 for
each answer which rounds
to correct value
2 (b)
as x increases over the interval the gradient of
f(x) increases
as gradient increases, relative error increases
oe
B1
B1
[2]
1.1
2.4
if B0B0 allow SC1 for as x
increases the relative error
increases
2 (c) relative errors constant for g(x) but are not for
f(x)
changing the order of the operations affects the
errors
or
(gradient is always 2e2x but) gradient increases
more rapidly as x increases in first case
B1
B1
[2]
2.2a
2.4
allow any sensible consideration
of gradientY414/01 Mark Scheme November 2020
Question Answer Marks AOs Guidance
3 (a) ( 2)( 5) ( 1)( 5)
2.53 7.71
(1 2)(1 5) (2 1)(2 5)
( 1)( 2)
47.37
(5 1)(5 2)
x x x x
x x
− − − −
× + ×
− − − −
− −
+ ×
− −
2.01x2 ‒ 0.85x + 1.37
M1
A1
A1
A1
[4]
1.1
1.1
1.1
1.1
Lagrange form with 3 terms;
allow one substitution error in
each term
all values correctly placed
two coefficients correct
all correct
M0 if x and y values
interchanged
3 (b) substitution of 2.525, 7.715 and 47.365
substitution of 2.535, 7.705 and 47.375 UB
2.0067 < a < 2.0133
M1
M1
A1
[3]
3.1a
3.1a
1.1
lower bound
upper bound
accept eg 2.0067 ≤ a ≤ 2.0133
if M0M0 allow SC1 for
2.525, 7.705 and 47.365
or 2.535. 7.715
and 47.375 used
4 (a) [45.730 ‒ ] 412×0.0005 or
[45.730 + ] 412×0.0005 soi
£45.52 ≤ cost < £45.94
M1
A1
A1
[3]
3.3
3.4
1.1
for one bound correct
allow eg lower bound is £45.52
and upper bound is £45.94
4 (b) [45.730 + ] 412 × 0.001
£45.73 ≤ cost < £46.14
M1
A1
[2]
3.3
3.4 allow eg lower bound is £45.73
and upper bound is £46.14Y414/01 Mark Scheme November 2020
9
Question Answer Marks AOs Guidance
4 (c) eg chopping: expect additional cost of 412 ×
0.005, which is very close to the actual invoice
but with rounding expect additional cost of
412 × 0
so choose Roxanne’s model (as this is
(probably) better)
B1
B1
B1
[3]
3.5a
3.5a
2.2b
or cost is in middle of range of
answers for chopping
but is very close to the upper
limit for rounding
5 (a) 1
3
0
∫ x x x + + 3 d B1 B1
[2]
1.1
2.5
integrand
all correct including integrand
and limits
5 (b) = 0.5*(D5+D6) oe B1
[1]
1.1 = (D5+D6) /2 = 0.5*(C6‒C5)*(D5+D6)
5 (c) 4 × 1.944001 ‒ 1.984059
3
1.930648 cao
M1
A1
[2]
1.1a
1.1
allow use of correct formula
with other consecutive values
from Fig.5.2
5 (d) using the calculator we are working with
numbers rounded to 6 d.p. (so accuracy is lost)
but the spreadsheet stores the values to a
(much) higher precision (than 6 d.p.)
B1
B1
[2]
2.4
2.4Y414/01 Mark Scheme November 2020
Question Answer Marks AOs Guidance
5 (e) 4×1.932032‒1.934406
3
or
4×1.931439‒1.932032
3
(S16) = 1.9312406666…to 6 or more dp
(S32) = 1.931241333 to 6 or more dp
so 1.93124 is secure
M1
A1
A1
A1
[4]
2.1
1.1
1.1
2.2b
4 × 1.932032‒1.934406
3
allow 1.931241 from comparison
use of correct formula
with any 4×�2�‒��
3
with
values from table
NB correct value is
1.931242 to 6 dp
6 (a) x3 = 3x ‒ 1
3
x x n n +1 = − 3 1. AG
M1
A1
[2]
1.1
1.1
attempt to isolate x3, allow sign
error
completion to given answer, must
include subscripts
6 (b)
1.259921
1.406056
B1
B1
[2]
1.1
1.1
NB 1.25992104989 and
1.40605593458
if B0B0 allow SC1 for
both roots correct to
different precisionY414/01 Mark Scheme November 2020
11
Question Answer Marks AOs Guidance
6 (c)
B1
B1
[2]
1.1
1.1
�0 and �1 correctly positioned,
allow if wrongly attributed
all correct
FT their �1
FT their �2
6 (d) for convergence to β we require
‒ 1 < g′ (β) < 1, but in this case the
gradient of g(x) at x = β is clearly greater than
1, so it won’t converge oe
B1
[1]
1.2 allow eg the gradient of g(x) at
x = β is greater than 1 so won’t
converge
explanation must refer to
g′(β) failing to meet the
criterion for convergence
6 (e) 1.5320868 + 2.76×10‒6 × 0.426
1−0.426
1.53208864 to 1.53208884836
1.53209 is secure by comparison with �15
M1
A1
A1
A1
[4]
3.1a
1.1
1.1
2.2b
extrapolation using a value of xn
its associated difference and
0.426 or 0.43 or 0.4
all elements correct
allow 1.532089
allow calculated
difference between
iterates for difference
precision must be justifiedY414/01 Mark Scheme November 2020
Question Answer Marks AOs Guidance
7 (a) 0.5 f (0.8) 0.8 f (0.5)
f (0.8) f (0.5)
× − ×
−
soi oe
56.0671 cao
M1
A1
[2]
1.1a
1.1
allow one slip in function value
7 (b) (f(0.8) ‒ f(0.5) ≈ 0 and replacing f(0.8) with
f(1) leads to) the denominator no longer being
close to zero oe
B1
[1]
2.4 or the initial values are close to a
turning point so the process is
unstable
7 (c) M1
A1
A1
[3]
3.1a
1.1
3.2a
attempt to find sign change for
either of last two values
both values of f(x) correct for
either case
no c.o.s. so not accurate to 6 dp,
but c.o.s. confirms accurate to
5 d.p.
both must be checked for
this markOCR (Oxford Cambridge and RSA Examinations)
The Triangle Building
Shaftesbury Road
Cambridge
CB2 8EA
[Show More]