Health Care > EXAMs > C.A State Elevator Mechanic Study Guide| Questions With Complete Solutions (All)

C.A State Elevator Mechanic Study Guide| Questions With Complete Solutions

Document Content and Description Below

Ladder must be installed if pit is deeper than... Correct Answer: 35" (3') ASME A 17.1 - 2004 2.2.4.2 Ladder shall not extend more than ___ above the sill. Correct Answer: 48" (4') ASME A 17.1 - ... 2004 2.2.4.2 Rungs (cleats or steps) of ladder should be a minimum of ___ wide. Correct Answer: 16" ASME A 17.1 - 2004 2.2.4.2 Siderails shall have a clear distance of not less than ___ from their centerline to the nearest permanent object. Correct Answer: 4.5" ASME A 17.1 - 2004 2.2.4.2 Ladder access shall not be permitted if pit is deeper than ___ below the sill of the access door. Correct Answer: 120" (10') ASME A 17.1 - 2004 2.2.4.2 Illumination of pit and platform should be___. Correct Answer: 10FC ASME A 17.1 - 2004 2.2.5.1 Where should the light switch be located in the pit? Correct Answer: Where accessible from the pit access door. ASME A 17.1 - 2004 2.2.6.1 When the car is on compressed buffer, what is the clearance between the car and the pit? Correct Answer: 24" (2') clearance. No part of the car should be touching the pit with a 24" (2') clearance. ASME A 17.1 - 2004 2.4.1.1 Where vertical clearances are less than ____", that area should be clearly marked on the pit floor. Correct Answer: 24" (2') Markings should be___" diagonal red and white stripes "Danger low clearance." Correct Answer: 4" When oil buffers are used, bottom runny should be no less than ___". Correct Answer: 6" When spring or solid buffers are used, bottom runny should be no less than ___". Correct Answer: 6" What is the maximum bottom runby on a car? Correct Answer: 24" (2') Buffer data plate letters shall be no less than ___" in height. Correct Answer: 1" What is the maximum bottom runby on a counterweight? Correct Answer: 35" (3') What is the minimum sill to sill clearance? (side guides) Correct Answer: 1/2" What is the minimum clearance for corner guides [Show More]

Last updated: 3 years ago

Preview 1 out of 7 pages

Buy Now

Instant download

We Accept: