Choose the Quick configuration Guides that are available in the SonicOS interface. (Select all that apply from App Rule, Licensing, Setup, Bandwidth Management, VPN)
App Rule, Setup, VPN
What options are used to
...
Choose the Quick configuration Guides that are available in the SonicOS interface. (Select all that apply from App Rule, Licensing, Setup, Bandwidth Management, VPN)
App Rule, Setup, VPN
What options are used to preempt an administrator logged into the firewall?
Log out,
Drop into non-config mode
T/F: The default guest profile cannot be deleted
TRUE
T/F: As a general practice, all inbound connections should be logged.
True
Which feature is used to create a predefined email notification with a defined subject?
Automation
What is the default timeout setting for administrator inactivity?
5 minutes
Where is the real-time data on the Dashboard compiled and summarized from?
AppFlow
Which panel of the SonicOS management interface is used to define password restrictions?
Manage > Appliance > Base Settings > Login Security
T/F: Enabling HTTPS management of the WAN interface is considered a best practice.
True
What is the navigation path to create a bandwidth object in SonicOS 6.5?
Manage>Policies>Objects>Bandwidth objects
What is the navigation path to configure Capture ATP settings?
Manage > Security Services
T/F: The real time data that is depicted on the Dashboard is compiled and summarized from the AppFlow panel.
TRUE
Which of the following are displayed on the System Status monitor? (Select all that apply)
Network interfaces
Latest Alerts
System Information
Which object type is used to create a CFS policy?
Content Filter Object
What type of CFS object allows you to take action on a specific category?
CFS Profile Object
What object type represents the condition that must be met in an App Rule policy?
Match Object
What type of information is displayed on the Threat Protection monitor? (Select all that apply)
Viruses blocked
Intrusions prevented
Spyware Blocked & Multimedia
Which object type represents the condition that must be met in an app rule policy?
Match Object
T/F: The Firewall Snapshot section displays the percentage of encrypted traffic flowing through the firewall.
TRUE
T/F: The Enable App Control check box is selected by default?
False
T/F: During the HA configuration, the Virtual MAC option should be enabled so that the switch does not have to re-learn the MAC of the secondary unit upon failover
TRUE
Where are the AppFlow reports generated in the SonicOS management interface?
Investigate > Reports > AppFlow Reports
The HA Interfaces tab is used to define the mode for the primary firewall. What is the SonicOS navigation path for HA configuration?
Manage>High Availability>Base Setup
Which packet replay method is used to send individual packets with respective header fields and payload details to the firewall engine for analysis?
Single Packet
Event Logs
Depict all network and user activity in real-time
Connection Logs
Display active inbound and outbound connections
AppFlow Logs
Provide information about incoming and outgoing data packets in real-time
WAN Acceleration Logs
Provide details about the WXA performance
If the Logging Level filter is defined as Error, which of the following alert messages will also be displayed in the results? (Select all that apply)
Critical
Emergency
Alert
T/F: The Logging levels can be depicted, in descending order of priority, as:
Emergency
Alert
Critical
Error
Warning
Notice
Inform
Debug
TRUE
T/F: When enabling HTTPS management on the WAN (X1) interface, a rule to enable HTTP to HTTPS redirect is automatically enabled.
TRUE
Where do you navigate to create a virtual interface in SonicOS?
Manage > System Setup > Network > Interfaces > Click "Add Interface" drop-down and select Virtual Interface
What are the 4 types of interfaces that can be selected from the "Add interfaces" drop-down?
1. Virtual Interface
2. VPN Tunnel Interface
3. WLAN Tunnel Interface
4. 4to6 Tunnel Interface
What are the 4 default zone types?
1. WAN
2. LAN
3. DMZ
4. WLAN
What are the 4 available IP modes under interface settings?
1. Static IP mode
2. Transparent IP mode (Splice L3 subnet)
3. IP Unnumbered
4. Native Bridge mode
Static IP mode
Must set the IP address and subnet mask manually
Transparent IP mode (Splice L3 subnet)
The IP address for the interface is assigned using an Address Object that falls within the WAN primary IP subnet, effectively spanning the subnet from the WAN interface to the assigned interface
IP unnumbered mode
Borrows its address from another interface; this is configured when a WAN interface is configured in PPoE mode
Native Bridge Mode
the member interface will share the same zone and IP subnet as parent interface to which it is bridged
T/F: A default gateway address is optional on a LAN interface
TRUE
T/F: A default gateway IP address is required on a WAN interface if any destination is required to be reached via the WAN interface that is not part of the WAN subnet IP address space
TRUE
Where do you navigate to globally enable bandwidth management on the firewall?
Manage > Security Configuration > Firewall Settings > Bandwidth Management > Click "Advanced" Radio Button > Click "Accept"
Where do you navigate to configure the WAN interface Bandwidth?
Manage > System Setup > Network > Interfaces > Select "X1 WAN" > Select "Advanced Settings" tab > Select "Enable interface egress/ingress bandwidth limitation"
T/F: If a firewall is licensed for Capture ATP then the Capture ATP service is enabled by default.
FALSE
Where do you navigate to enable and configure Capture ATP, GEO-IP, and Botnet Filter?
Manage > Security Configuration > Security Services
Where do you navigate to enable GEO-IP filter?
Manage > Security Configuration > Security Services > GEO-IP filter
[Show More]