KASPERSKY KL002.11.1d COLOR AMARILLO CORRECTAS: Contains 27 Q&A. All Answered Satisfactorily.

Document Content and Description Below

KASPERSKY KL002.11.1d COLOR AMARILLO CORRECTAS 1. Under which scenario would a Kaspersky Endpoint Security 11.1 installation require a system restart?El número máximo de respuestas ha sido selec... cionado • If the product is installed on a non-server operating system • If the product is installed on an operating system where Windows Defender is enabled • If the Device Control component is selected to be installed • If a program incompatible with Kaspersky Endpoint Security 11.1 is detected on the computer and the installer removes it 2. Which components of Kaspersky Endpoint Security for Windows (11.1.0) can NOT be installed on a server operating system?El número máximo de respuestas ha sido seleccionado • Device Control • AMSI Protection provider • Application Control • Adaptive Anomaly Control • Behavior Detection • Host Intrusion Prevention 3. What is the minimum amount of RAM required to install Kaspersky Endpoint Security for Windows (11.1.0) on a 32-bit Windows operating system? • 256 MB • 2048 MB • 1024 MB • 512 MB 4. On which operating systems can Kaspersky Security Center 11 Administration Server be installed?El número máximo de respuestas ha sido seleccionado • Windows Server 2016 • Windows Server 2012 R2 • Windows 10 • Windows Server 2008 R2 • Windows Server 2019 • Windows Server 2003 5. Which group tasks and policies does the Quick Start wizard create on the Administration Server if it is started from the MMC console?El número máximo de respuestas ha sido seleccionado • A Rollback task for Kaspersky Endpoint Security for Windows • An Update task for Kaspersky Endpoint Security for Windows • An out-of-office policy for Kaspersky Endpoint Security for Windows • A policy for Kaspersky Endpoint Security for Windows • A policy for Kaspersky Security Center Network Agent • A ‘Find vulnerabilities and required updates’ task for Network Agent • A Virus Scan task for Kaspersky Endpoint Security for Windows 6. The administrator starts the Administration Server Quick Start Wizard from the MMC console. In which of the following cases will the wizard create a Send Reports task? • If the Installation Wizard found a correctly configured local mail client • If email notification parameters have been specified in the Quick Start Wizard • If the option More than 5000 Computers on the Network was selected in the Installation Wizard • The Quick Start Wizard does not create a Send Reports task 7. Which of the following database servers can Kaspersky Security Center 11 NOT work with?El número máximo de respuestas ha sido seleccionado • MySQL • Microsoft SQL • IBM DB2 • Oracle Database • PostgreSQL 8. Which of the following operating systems does Kaspersky Endpoint Security for Windows (11.1.0) support? • Microsoft Windows Server 2012 R2 Datacenter • Microsoft Windows Server 2012 R2 Enterprise • Microsoft Windows Server 2012 R2 Standard • Microsoft Windows Server 2012 R2 Essentials • Microsoft Windows Server 2012 R2 Foundation 9. Which of the following database servers does Kaspersky Security Center 11 support?El número máximo de respuestas ha sido seleccionado • Microsoft SQL Server 2016 • Microsoft SQL Server 2014 • Microsoft SQL Server 2012 • Microsoft SQL Server 2008 R2 • Microsoft SQL Server 2017 • Microsoft SQL Server 2005 10. Which of the following database servers does Kaspersky Security Center 11 support?El número máximo de respuestas ha sido seleccionado • Microsoft SQL Server 2012 • Microsoft SQL Server 2017 on Windows • Microsoft SQL Server 2017 on Linux • MySQL Enterprise 5.7 • Microsoft Azure SQL Database • Amazon RDS for SQL Server • Amazon RDS for MySQL 11. Which of the following virtual platforms does Kaspersky Endpoint Security for Windows (11.1.0) support?El número máximo de respuestas ha sido seleccionado • Oracle VM VirtualBox • KVM • Citrix Provisioning Services • VMware ESXi • Microsoft Hyper-V • Citrix XenDesktop • VMWare Workstation 12. Which of the following components will NOT be installed under Windows Server 2012 from the default installation package of Kaspersky Endpoint Security 11.1 for Windows?El número máximo de respuestas ha sido seleccionado • Application Control • AMSI Protection provider • Network Threat Protection • Mail Threat Protection • File Threat Protection • Device Control • Adaptive Anomaly Control 13. The administrator needs a standalone installation package of Kaspersky Endpoint Security for Windows (11.1.0) that will automatically uninstall incompatible applications during the installation. How would you create one in Kaspersky Security Center 11? • Any standalone package of Kaspersky Endpoint Security for Windows (11.1.0) automatically uninstalls incompatible applications • Select the check box Uninstall Incompatible Applications Automatically in the properties of the standalone installation package • Make sure that the check box Uninstall Incompatible Applications automatically is selected in the properties of the regular installation package of Kaspersky Endpoint Security 11.1 for Windows prior to creating a standalone installation package • Make sure that the check box Uninstall Incompatible Applications Automatically is selected in the properties of the regular installation package of Kaspersky Network Agent prior to creating a standalone installation package 14. Which settings of the Install applications remotely task do you need to modify for the installation to complete successfully? • Following an installation of the Kaspersky Security Center 11, you create a KES installation group and place network computers into that group. Additionally, you enable the automatic installation of Network Agent and Kaspersky Endpoint Security within the group properties. • Specify the license key • Specify the list of accounts to be used to run the task • Change the installation method • Nothing is to be changed 15. How would you make this change? During the installation of Kaspersky Security Center, the DNS name of the Administration Server was specified for its connection address. Before deploying Kaspersky Network Agents, the administrator decides that the Server’s IP address should be used for connections. • Run the Quick Start wizard again • Modify the address in the Administration Server policy • Modify the Administration Server address in the properties of the Network Agent installation package • Modify the address in the Network Agent policy 16. Which of the following Administration Server parameters cannot be modified without reinstalling Kaspersky Security Center? • Administration Server communication ports • SQL server address • Administration Server account • Shared folder location 17. The administrator plans to use the SNMP protocol to receive messages from the Administration Server and monitor statuses. However, the SNMP agent component is missing from the list of Administration Server components in the installation wizard. Why? • The SNMP Agent> component has a separate installer • SNMP Agent is an Administration Console component, not a Server component • SNMP Agent is always installed, it does not need to be selected as an option • SNMP Agent is not displayed if the SNMP service (a component of Windows operating system) is not installed on the computer 18. Which network polling methods are enabled by default in Kaspersky Security Center 11 Administration Server?El número máximo de respuestas ha sido seleccionado • Active Directory polling • IP range polling • Quick Windows Network Poll • Full Windows Network Poll 19. Which of the following can be specified as the Administration Server connection address for Network Agents in Kaspersky Security Center 11?El número máximo de respuestas ha sido seleccionado • DNS name • NetBIOS name • IPv6 address • IPv4 address • Email address • MAC address 20. You want to publish installation packages in Active Directory via the Kaspersky Security Center 11 Administration Server. Which installation packages can be published this way? • Only Kaspersky Network Agent packages • Packages of Kaspersky Lab products only • Any packages available in the Installation Packages repository • None 21. What is the primary function of the Kaspersky Network Agent? • Provide communication between the Administration Server and Kaspersky Lab protection software • Store the event database • Provide local and remote access to the Administration Server interface • Provide web access to the Administration Server interface 22. Which level of permissions is required to be able to install Kaspersky Endpoint Security for Windows on the computer? • Power user • User • Local administrator • Domain administrator 23. Which of the following ports must be opened in the firewall for the users to be able to download the package using the automatically created link? The administrator plans to use standalone installation packages to install Kaspersky Endpoint Security for Windows (11.1.0). However, a third-party firewall is installed on the computer that is running Kaspersky Security Center 11 Administration Server. El número máximo de respuestas ha sido seleccionado • 80 and 443 • 15,000 • 8060 • 8061 • 13291 8. How does Host Intrusion Prevention react by default to the programs that start before Kaspersky Endpoint Security 11.1? • It automatically moves them to the High Restricted group • It does not react • It automatically moves them to the Low Restricted group 9. Into which trust group does Host Intrusion Prevention move programs by default for which it cannot receive information from KSN? • Low Restricted • Trusted • High Restricted • Untrusted 10. The administrator has decided to enable scanning for encrypted connections. Which components of Kaspersky Endpoint Security will use it?El número máximo de respuestas ha sido seleccionado • Web Threat Protection • Mail Threat Protection • AMSI Protection provider • Web Control • Adaptive Anomaly Control 11. What does the Firewall do with a packet that meets conditions of several rules, including an allow rule for packets and a block rule for applications? The block rule for applications is higher on the list than the allow rule for packets. • Allows the packet • Applies the rule that is lower in the list • Applies the rule that is higher in the list • Blocks the packet 12. How will Web Threat Protection scan https traffic under the default settings if a website uses an EV certificate? • The certificate will NOT be substituted, https traffic will NOT be scanned • The certificate will be substituted, https traffic will be scanned • At the first connection, the certificate will be substituted, https traffic will be scanned. At subsequent connections, the certificate will NOT be substituted, https traffic will NOT be scanned 13. How can you disable the Background scan task on the client computers? • Delete the Background scan task from the list of tasks in Kaspersky Security Center • Delete the Background scan task from the list of tasks in the computer’s properties • Clear the Scan When the Computer is Idling checkbox in the policy of Kaspersky Endpoint Security for Windows, in Application Settings | Local tasks | Background scan 14. The user tries to connect to a website over https. Kaspersky Endpoint Security installed on the computer is under the policy created by the Quick Start Wizard. An error occurs when scanning encrypted traffic. What will happen in that case? • Kaspersky Endpoint Security will block the https connection to the website. The user will see the corresponding pop-up notification by Kaspersky Endpoint Security • The https connection to the website will fail and return an error • The website will be automatically added to the local list of exclusions (domains with secure connection scan errors). Encrypted traffic will not be scanned for this website. The user will successfully connect to the website 15. How can the administrator consult the list of domains with secure connection scan errors? • Via the Administration Console, in the computer properties • Only in the local interface of Kaspersky Endpoint Security on the user’s computer • Via the Administration Console (in the computer properties), or in the local interface of Kaspersky Endpoint Security 16. Can you configure the system drive to be scanned for viruses only when the screensaver is on or the Windows session is locked? • The network is protected with Kaspersky Endpoint Security 11.1 and managed with Kaspersky Security Center 11. You are creating a virus scan task. • Yes, you can select the check box Suspend Scheduled Scanning When the Screensaver Is Off and the Computer Is Unlocked in the Kaspersky Endpoint Security policy • Yes, you can create a virus scan task for the system drive and select the check box Scan When the Computer Is Idling in its properties • Yes, you can select the check box Scan When the Computer Is Idling in the Kaspersky Endpoint Security policy • No 17. Which of the following components of Kaspersky Endpoint Security 11.1 for Windows does not use the KSN technology? • File Threat Protection • Virus Scan tasks • Network Threat Protection • Exploit Prevention • Web Threat Protection 18. In which of the following cases will Kaspersky Endpoint Security 11.1 for Windows consider a file to be non-infected? • Signature or heuristic analysis returned the Infected verdict, while the KSN database considers the file to be clean • Signature or heuristic analysis returned the Clean verdict, while the KSN database considers the file to be infected 19. Which of the following can the Mail Threat Protection component of Kaspersky Endpoint Security 11.1 for Windows do?El número máximo de respuestas ha sido seleccionado • Scan webmail traffic • Scan MAPI traffic in Microsoft Office Outlook • Scan SMTP/POP3/IMAP/NNTP traffic • Filter email attachments 20. In which of the following web browsers can’t Web Threat Protection of Kaspersky Endpoint Security 11.1 for Windows block dangerous objects? • Internet Explorer • Mozilla Firefox • Google Chrome • Microsoft Edge • None of the above (meaning, it can block dangerous objects in all of them) 21. The user downloads an archive with freeware from a website over HTTP. If there is an infected object in the archive, which component of Kaspersky Endpoint Security 11.1 for Windows will be the first to detect it? • Firewall • Virus Scan task • Web Threat Protection • File Threat Protection 13. A computer running Windows 2012 Server is protected with Kaspersky Endpoint Security 11.1 having the default settings. The administrator wants to use it as a print server, but no prints are being successful. What would be the reason for this? • Firewall blocks network activity of the print server • Host Intrusion Prevention blocks the main process of the print server • Application Control blocks the start of the print server program • The printer is blocked by Device Control 14. Which of the listed below is a known limitation of the Web Control component in Kaspersky Endpoint Security 11.1 for Windows? • It can’t block content by data type over an https connection • It can’t block any website accessed over an https connection • None of the above • It works only with the mainstream web browsers, such as Internet Explorer, Mozilla Firefox, Google Chrome 15. You want to block the start of a program on Windows servers. How can you do it with Kaspersky Endpoint Security 11.1 for Windows? • Block its start using Application Control • It is impossible for servers • Add the program to the Untrusted list in the Host Intrusion Prevention component settings 16. Consider Kaspersky Security Center 11. Which features or components provide the data that populate the Executable Files node in the Administration Console? • Host Intrusion Prevention of Kaspersky Endpoint Security • Application Control of Kaspersky Endpoint Security • Kaspersky Security Center Network Agent • Inventory task of Kaspersky Endpoint Security • Vulnerability Scan task of Kaspersky Endpoint Security 17. Which executable files will get into this category? The administrator of Kaspersky Security Center 11 connects the ММС console to the locally installed Administration Server, creates an automatically filled application category, and specifies the С:\Program Files\Microsoft\ folder as a parameter. • The files whose SHA-256 checksum coincides with the checksum of a file located in С:\Program Files\Microsoft\ on the Administration Server • The files whose MD5 checksum coincides with the checksum of a file located in C:\Program Files\Microsoft\ on the Administration Server • The files that have the same certificate as a file located in С:\Program Files\Microsoft\ on the Administration Server • The files whose metadata coincides with the metadata of a file located in С:\Program Files\Microsoft\ on the Administration Server 18. Consider Kaspersky Endpoint Security for Windows (11.1.0). You want to block banners on the web pages visited by the users. How can you achieve this? • Enable the option to block banner links in the Web Threat Protection settings • Enable the Anti-Banner component • Create a rule in the Web Control settings to block the content category Banners • None of the above 19. Which of the components within Kaspersky Endpoint Security 11.1 for Windows is the right tool for the job? The administrator wants to prohibit the users from starting any browser except for Internet Explorer. They don’t want to block any other kinds of applications. • Application Control • Host Intrusion Prevention • Device Control • Web Control • Adaptive Anomaly Control 22. Which ports must be opened on the server for the client computers to be able to update successfully? Consider Kaspersky Security Center 11 and Kaspersky Endpoint Security 11.1 for Windows. The Administration Server is installed with the default settings and is specified as the update source in group tasks. • TCP ports 8060 and 8061 • UDP ports 137 and 138, TCP ports 139 and 445 • HTTP port 80 • TCP port 13000 23. Can the start of group update tasks be randomized in Kaspersky Security Center 11 to avoid simultaneous connections of all client computers to the Administration Server? • Yes • Yes, but only if the From 1000 to 5000 Computers or More than 5000 Computers option was selected during the installation of the Administration Server • Yes, but only if the computers are organized into several subgroups with update tasks having different schedules • No 24. A commercial license has expired in an organization, and the money for purchasing a new license will be allocated only in a month. Which functions of Kaspersky Endpoint Security 11.1 for Windows will NOT work until the new license is in place? • Update • Real-time protection components • Virus Scan tasks • Management via Kaspersky Security Center 25. Consider Kaspersky Security Center 11. What data is included into a backup copy of the Administration Server created with a dedicated Kaspersky Security Center task?El número máximo de respuestas ha sido seleccionado • The structure of managed computers • Regular (non-standalone) application installation packages • The Administration Server database • Contents of the Kaspersky Lab Software Updates and Patches storage 26. There is a standard computer selection named <b>Many viruses detected</b> in Kaspersky Security Center 11 Administration Console. What does “many” mean? • The number specified for the Many Viruses Detected status in the group properties • The number specified in the selection properties • More than 10 viruses per 10 minutes • More than 0 27. How can you achieve this? Many computers have the Critical status with the Not scanned for a long time description in Kaspersky Security Center 11 Administration Console. The administrator thinks that it is not a problem and does not want this condition to influence computer statuses. • It is not possible • Modify the status change conditions in the administration groups’ properties • Modify the status change conditions in the Administration Server properties • Modify the status change conditions in the policy of Kaspersky Endpoint Security for Windows [Show More]

Last updated: 2 years ago

Preview 1 out of 14 pages