NFPA 10 Chapter 1 Administration study guide Questions with Verified Answers
What is this purpose of this code applied for - CORRECT ANSWER installation
inspection ,
maintenance ,
recharging ,
testing of porta
...
NFPA 10 Chapter 1 Administration study guide Questions with Verified Answers
What is this purpose of this code applied for - CORRECT ANSWER installation
inspection ,
maintenance ,
recharging ,
testing of portable fire extinguisher of Class D extinguishing agents .
These requirements shall not apply to - CORRECT ANSWER permanently installed fire extinguishment
Even where portions of such system are portable
True or false
A hose and nozzle attached to a fixed supply of Extinguishing agent is it a provision to NFPA 10 - CORRECT ANSWER False .
Purpose of this standard is prepare for use by and guidance of persons charged with selecting - CORRECT ANSWER , purchasing , installing , approving , listing , designing , and maintaining portable fire extinguishers and Class D Extinguishing agents .
True or False The fire protection requirements of this standard are a general in nature and are not intended to abrogate the specific requirements of other NFPA standards for specific occupancies . - CORRECT ANSWER True
True or False
Nothing in this standard shall be construed as a restriction on new technologies or alternative arrangements , provided that the level of protection as heron described is not lowered and is acceptable to the local AHJ ? - CORRECT ANSWER True
What is the factor for LITER ( L) - CORRECT ANSWER 1gal =2.864
What is the factor for Millimeter ( mm) - CORRECT ANSWER 1in =25.4 mm
What is the factor for Meter ( M) - CORRECT ANSWER 1ft=0.305 m
What is the factor for Kilogram ( kg ) - CORRECT ANSWER 1lb =0.454 kg
What is the factor for Degree Celsius ( •c ) - CORRECT ANSWER 5/9 ( F-32 ) = Celsius
What is the factor Bar ( bar) - CORRECT ANSWER . 1psi=0.0689 bar
True or False The given equivalent value shall be not permitted to be considered approx - CORRECT ANSWER False - it is required
True or False The conversion procedure for SI units is to multiply the quantity by conversion factor and then round the results to appropriate number of significant digits . - CORRECT ANSWER True
What does SI stand for - CORRECT ANSWER International System of Units
[Show More]
