NICET FIRE ALARM LEVEL 1 EXAM STUDY QUESTIONS WITH
REVISED ANSWERS COMPLETE GUARANTEED PASS | RATED A+
A device suitable for connection to a circuit that has a sensor that responds to a physical
stimulus such as gas,
...
NICET FIRE ALARM LEVEL 1 EXAM STUDY QUESTIONS WITH
REVISED ANSWERS COMPLETE GUARANTEED PASS | RATED A+
A device suitable for connection to a circuit that has a sensor that responds to a physical
stimulus such as gas, heat, or smoke. - Answer>>> Detector
The maximum current, in amperes, that a conductor can carry continuously under the conditions
of use without exceeding its temperature rating. - Answer>>> Ampacity
A device intended to provide protection from the effects of arc faults by the recognizing
characteristics unique to arcing and by functioning to de-energize the circuit what an arc fault is
detected - Answer>>> Arc-Fault Circuit Interrupter(AFCI)
The circuit conductors between the final overcurrent device protecting the circuit and the
outlet(s), - Answer>>> Branch Circuit
Ceilings that have solid structural or solid nonstructural members projecting down from the
ceiling surface more than 4 in. and spaced more than 36 in apart, center to center. - Answer>>>
Beam Construction
Actuation of alarm notification appliances or EVC's, emergency control function interface
devices, and annunciation at the protected premises shall occur within - Answer>>> 10 seconds
indication and restoring of self-restoring supervisory device shall be automatically indicated
within - Answer>>> 90 seconds
Maximum air sample transport time from the farthest sampling port to the detector shall not
exceed - Answer>>> 120 seconds
Wire splices angle or are you polls are made, the distance between each raceway entry inside
the box or condo and body and the opposite wall of the box or kind a wood-burning or not be
less than - Answer>>> 6 times the trade size of the largest raceway in a row.
Vertical runs of a metal wireway shall be securely supported at intervals not exceeding -
Answer>>> 15 feet
The requirement forbidding fire alarm circuits from being T-tapped, unless indicated by the
manufacturer's instructions, is intended to prevent which type of improper malfunction? -
Answer>>> monitoring integrity of installation conductors?
What is the maximum operating temperature of TW insulation? - Answer>>> 140 Degrees F,
Table 310.15 (B)(16)
Which type of meter is used to measure the current draw of a strobe circuit? - Answer>>>
multimeter
[Show More]