SolidWorks/SolidProfessor Exam Questions | Answered with complete solutions

SolidWorks/SolidProfessor Exam Questions | Answered with complete solutions Which of the following keys is a standard shortcut for the Zoom-to-Fit tool? F The View Orientation window appears by pressing the _____ key ...

SolidWorks/SolidProfessor Exam Questions | Answered with complete solutions Which of the following keys is a standard shortcut for the Zoom-to-Fit tool? F The View Orientation window appears by pressing the _____ key on the keyboard Spacebar The Shortcut menu shown in the image is activated by: The 'S' hotkey A parametric modeler is controlled by: Relationships and Dimensions The design intent of this part is to have the whole centered on the from face. If you change the 100 mm dimension to 75 mm and 150 mm dimensions to 200 mm, will the hole remain centered? No (would need to define a relationship that centers the hole) The _____ key(s) is used to launch the shortcut menu S Which tab is available in the SOLIDWORKS Task Pane? SOLIDWORKS Resources Design Library File Explorer View Palette Appearances, Scenes, Decals Custom Properties SOLIDWORKS Forum One way to remove an existing sketch is to select it and then press the _____ key on the keyboard Delete To select multiple sketch entities, press and hold down the _____ key on the keyboard while selecting multiple entities Ctrl While sketching a _____, you can switch directly to the Arc tool without clicking the Arc tool icon Line (auto-transitioning) While in sketch mode, the number displayed to the right of the cursor defines the sketch element's exact size. Therefore there is no need to add a dimension to set the dimensional value. False Which of the following is NOT a type of arc in SolidWorks? Equal Radius Arc (3 Point Arc, Center Point Arc, and Tangent Arc are) What type of arc can be transitioned to directly from sketching a line? Tangent Arc The units of a part can be changed under Options in the System Options tab? False (Under Document Properties in Options) Which icon allows you to exit a sketch while saving its changes? (The blue arrow) When box-selecting multiple items, to include only items completely enclosed within the box, drag the selection box from left to right True (right to left for selecting anything that is touched at all) You can fully define the shape and size of a sketch using only dimensions and geometric relations. True In order to create two-dimensional geometry, such as lines, arcs, and rectangles, what mode should SolidWorks be in? Editing Sketch While in sketch mode, the number displayed to the right of the cursor defines the sketch element's exact size. Therefore there is no need to add a dimension to set the dimensional value. False When sketched geometry is displayed in blue, the geometry is: Under-Defined When sketched geometry is displayed in black, the geometry is: Fully Defined The Extruded Boss feature can be used to remove material. False Which end condition of an Extruded Boss is used to add an equal amount of material to both sides of the sketch plane? Mid Plane Using the ___ option, you can change the state of a model back to where a particular feature or features weren't yet created Rollback After an extruded feature has been created, you can always, go back and edit the feature. When you edit an existing extrude feature, which of the following cannot be changed from the Extrude PropertyManager The shape of the sketch profile (The direction, width etc. can be changed) True/False: You can double click a feature in the graphics area to display its dimensions? True Which of the following geometric relation flags indicate that the sketch entities are coincident? (the lines intersecting on one point) Which icon would you click to activate the Smart Dimension tool and add dimensions to a sketch? (The one with two parallel lines, distanced by arrows) Which relation is not defined for the 2 segments shown? Collinear True/False: You can select a planar face as the reference plane for mirroring a feature? True True/False: When using the Hole Wizard feature, it is only possible to create one hole False What group box in the Hole Wizard PropertyManager should you use if you want to add custom hole parameters for later use? Favorites True/False: Faces, edges, features, and loops can all be selected to add to the Fillet PropertyManager selection box True True/False: When creating a Fillet, the Tangent Propagation option ensures that the Fillet is applied to all edges that are tangent to a selected edge True True/False: If there is an existing center-line in a sketch like the one shown, then SolidWorks will automatically pre-select it as the axis of revolution of a Revolved feature, regardless of its position or orientation True Which option needs to be selected from the Revolve Type drop-down list to revolve the sketch symmetrically on both sides of the sketching plane? Mid Plane True/False: A temporary axis is automatically created by SolidWorks for any part that has a circular edge or face True This feature is an example of a(n)_____ Revolved Boss Which of the following icons represents the SolidWorks Mirror feature? (The one with the part piece reflected across a vertical line) True/False: After creating the first model view, SolidWorks places you into Projected View mode where you can add projected views of the model view True Projected views are different from model views because_____ Projected views need a pre-existing view before they can be created True/False: The "Display Style" icon on the heads up toolbar only becomes available if you select a drawing view from the sheet True True/False: You cannot re-align a view if you choose to break its default alignment False True/False: You can change the scale of the entire sheet but you can not change the scale of individual views False Even if you applied a custom scale to a drawing view, changing the scale of the entire sheet will still modify the scale of that drawing view False What type of drawing views can be displayed in an exploded state? Any type of drawing view that has an exploded state