Solutions Manual for Basic Fracture Mechanics and its
Applications, 1e by Ashok Saxena (All Chapters)
According to the Griffith’s theory for brittle fracture, the energy required to increase
the crack area by a unit a
...
Solutions Manual for Basic Fracture Mechanics and its
Applications, 1e by Ashok Saxena (All Chapters)
According to the Griffith’s theory for brittle fracture, the energy required to increase
the crack area by a unit amount is equal to twice the energy required per unit area
for creating new surfaces. Why is the factor of 2 needed?
Let the crack surface extend by an incremental area, ∆A = B∆a, where B = thickness
of the planar body and ∆a be the increase in the crack length. The area of new
surfaces thus created is twice the area of crack extension = 2B∆A and therefore the
surface energy required to create the new surfaces = 2𝛾𝛾∆A, where, 𝛾𝛾 = surface energy
per unit area of surface.
2. What is the Griffith’s crack extension force, G?
For cracks to extend, energy is needed for forming new surfaces and for plastic
deformation that accompanies crack growth. The sum of the surface energy and
the energy for plastic deformation can be expressed as energy required for unit
area of crack extension. Griffith’s crack extension force, G, is the energy available
for release that can supply the energy needed for crack growth. If ∆F = work done
by the external forces when the crack extends by an area, ∆A, then energy balance
requires that:
∆𝐹𝐹
∆𝐴𝐴 = ∆Π
Δ𝐴𝐴 + Δ𝑊𝑊𝑠𝑠
Δ𝐴𝐴 (1)
Where, ΔΠ = change in potential energy of the cracked body due to crack growth,
and Δ𝑊𝑊𝑠𝑠= energy dissipated in the form of surface energy and plastic deformation
due to crack growth. The change in potential energy during fracture under
isothermal conditions is equal to the change in the elastic strain energy, ∆U, of the
cracked body. Thus equation (1) can be written as:
∆𝐹𝐹
∆𝐴𝐴 = ∆U
Δ𝐴𝐴 + Δ𝑊𝑊𝑠𝑠
Δ𝐴𝐴 (2)
The energy available for crack extension is given by,
𝐺𝐺 = lim
Δ𝐴𝐴→0
∆𝑊𝑊𝑠𝑠
∆𝐴𝐴 = ∆𝐹𝐹
∆𝐴𝐴 − ∆U
Δ𝐴𝐴 (3)
For a planar body of constant thickness, B, equation (3) can be written as:
𝐺𝐺 = 1
𝐵𝐵 �
𝑑𝑑𝑑𝑑
𝑑𝑑𝑑𝑑 − 𝑑𝑑𝑑𝑑
𝑑𝑑𝑑𝑑� (4)
If the crack extends under conditions of constant deflection, dF = 0
Solutions Manual for Basic Fracture Mechanics and its
Applications, 1e by Ashok Saxena (All Chapters)
𝐺𝐺 = − 1
𝐵𝐵 �
𝑑𝑑𝑑𝑑
𝑑𝑑𝑑𝑑�
and if the crack extension occurs under constant load, it can be shown that
𝐺𝐺 = 1
𝐵𝐵 �
𝑑𝑑𝑑𝑑
𝑑𝑑𝑑𝑑�
Thus, in both cases, G is directly related to the change in strain energy due to crack
extension and therefore, G is also known as the strain energy release rate, where the
rate is with respect to unit area of crack extension.
[Show More]