Controller __________ is stored in the controller project and transferred to the processor the next
time the project is downloaded to the controller. - Answer>>> configuration
Developers must use the onboard software t
...
Controller __________ is stored in the controller project and transferred to the processor the next
time the project is downloaded to the controller. - Answer>>> configuration
Developers must use the onboard software to configure the terminal's ________ so that a control
application can be transferred (downloaded) to the panel. - Answer>>> IP address
When the ___________ timer instruction is de-energized, the timer increases the accumulated
value by the amount of time the instruction is de-energized. - Answer>>> Timer Off-Delay
_________ uses several protocols to convert data from its native format, such as text message,
into a format that can be sent and tracked from the source node to the destination node of the
network. - Answer>>> Ethernet TCP/IP
A controller project's version number indicates the Studio 5000 software version that the project
was developed with. It also determines the _____ revision the target controller must be running
to avoid a firmware mismatch. - Answer>>> Major firmware
The three network levels are Automation and control, Enterprise, and __________. - Answer>>>
Field device
Programmable Logic Controllers, PLCs, provide a means of controlling machines and other
industrial applications with a(n) ____________. - Answer>>> industrial computer
The manual mode is useful for __________ a machine, because doing so in automatic mode
would be dangerous. - Answer>>> Troubleshooting
CTD instructions are _________ used alone in programs. - Answer>>> rarely
In the continuous-cycle program, the start and stop pushbuttons control an internal ___________
which in turn starts and stops the sequence. - Answer>>> coil
The normal operating mode of machines is the _________ mode. - Answer>>> automatic
[Show More]
