Macroeconomics > QUESTIONS & ANSWERS > CENSECFOR Operator Training - M16A3/M4A1 Service Rifle 119 Exam Questions with 100% Correct Answers (All)

CENSECFOR Operator Training - M16A3/M4A1 Service Rifle 119 Exam Questions with 100% Correct Answers

Document Content and Description Below

CENSECFOR Operator Training - M16A3/M4A1 Service Rifle 119 Exam Questions with 100% Correct Answers What caliber is the M16A3/M4A1 service rifle? - ✔✔5.56 mm Which of the below statements best... describes weapons condition code 4? - ✔✔Safety on, magazine removed, chamber empty, bolt forward, ejection port cover closed. What is the maximum effective range of the M16A3 service rifle? - ✔✔1804 ft. (550 m) Which major component group of the M16A3 service rifle consist of the ejection port, the ejection port cover, and the housing for the bolt carrier key? - ✔✔Upper Receiver Assembly A safety function should be performed when? - ✔✔Anytime rifle is reassembled. Safety Rule 1 - ✔✔Treat every weapon as if it were loaded. Safety Rule 2 - ✔✔Never point a weapon at anything you do not intend to shoot. Safety Rule 3 - ✔✔Keep your finger straight and off the trigger until ready to fire. Safety Rule 4 - ✔✔Keep the weapon on safe until you intend to fire. What is the muzzle velocity of the M16A3 service rifle? - ✔✔3,100 fps (945 mps) Which stoppage is associated with a lower report or reduced recoil? - ✔✔Audible pop and reduced recoil caused by "Only a portion of the propellant is ignited."Which weapon (M4A1 / M16A3) has the greater maximum effective range? - ✔✔M16A3 Which type of stoppage usually occurs as a result of not seating the magazine? - ✔✔Bolt Forward What is "Danger"? - ✔✔An operating or maintenance procedure, practice, condition, statement, etc., which if not strictly observed, WILL result in serious injury to, or death to personnel, or threatens the primary mission of the ship. The remedial action steps below would be used to fix which stoppage? Press the magazine catch release, remove the empty magazine, and stow it on person if time permits. Insert a filled magazine into the magazine well and tug downward on the magazine to ensure it is properly seated. Pull the charging handle to the rear and then release it to allow the bolt to move forward and chamber a round. Sight in and attempt to fire. - ✔✔Bolt locked to the rear. What common stoppage is characterized by a double feed? - ✔✔Brass is obstructing the chamber area. What is the first step in the clearing barrel LOAD procedure? - ✔✔Attempt to place the selector lever in the SAFE position. [Show More]

Last updated: 2 years ago

Preview 1 out of 17 pages

Buy Now

Instant download

We Accept: