Questions and Answers > Domain 2.0 Network Implementations Quiz_ 22_SP-CTS-1305-61176 Intro to Networking _ CTS 1305. Score for this attempt: 50 out of 50.

Document Content and Description Below

Domain 2.0 Network Implementations Quiz: 22/SP-CTS-1305-61176 Intro to Networking Intro to Networking.html 1/6 Domain 2.0 Network Implementations Quiz Score for this attempt: 50 out of 50 ... Submitted Feb 20 at 5:39pm This attempt took less than 1 minute. Question 1 A systems administrator needs to improve Wi-Fi performance in a densely populated office tower and use the latest standard. There is a mix of devices that use 2.4 GHz and 5 GHz. Which of the following should the systems administrator select to meet this requirement? 802.11ac 802.11ax 802.11g 802.11n 12/4/22, 10:26 PM Domain 2.0 Network Implementations Quiz: 22/SP-CTS-1305-61176 Intro to Networking Intro to Networking.html 2/6 Question 2 An administrator is writing a script to periodically log the IPv6 and MAC addresses of all the devices on a network segment. Which of the following switch features will MOST likely be used to assist with this task? Spanning Tree Protocol Neighbor Discovery Protocol Link Aggregation Control Protocol Address Resolution Protocol Question 3 A technician is searching for a device that is connected to the network and has the device' s physical network address. Which of the following should the technician review on the switch to locate the device's network port? IP route table VLAN tag MAC table QoS tag Question 4 12/4/22, 10:26 PM Domain 2.0 Network Implementations Quiz: 22/SP-CTS-1305-61176 Intro to Networking Intro to Networking.html 3/6 A new cabling certification is being requested every time a network technician rebuilds one end of a Cat 6 (vendor-certified) cable to create a crossover connection that is used to connect switches. Which of the following would address this issue by allowing the use of the original cable? CSMD/CD LACP PoE+ MDIX Question 5 A technician is installing a high-density wireless network and wants to use an available frequency that supports the maximum number of channels to reduce interference. Which of the following standard 802.11 frequency ranges should the technician look for while reviewing WAP specifications? 2.4GHz 5GHz 6 GHz 900MHz Question 6 12/4/22, 10:26 PM Domain 2.0 Network Implementations Quiz: 22/SP-CTS-1305-61176 Intro to Networking Intro to Networking.html 4/6 A technician is configuring a network switch to be used in a publicly accessible location. Which of the following should the technician configure on the switch to prevent unintended connections? DHCP snooping Geofencing Port security Secure SNMP Question 7 Which of the following BEST describes a network appliance that warns of unapproved devices that are accessing the network? Firewall AP (Access Point) Proxy sever IDS Question 8 A technician wants to deploy a new wireless network that comprises 30 WAPs installed throughout a three-story office building. All the APs will broadcast the same SSID for client access. Which of the following BEST describes this deployment? 12/4/22, 10:26 PM Domain 2.0 Network Implementations Quiz: 22/SP-CTS-1305-61176 Intro to Networking Intro to Networking.html 5/6 Extended service set Basic server set Unified service set Independent basic service set Question 9 Which of the following is used to prioritize Internet usage per application and per user on the network? Bandwidth management Load balance routing Border Gateway Protocol Administrative distance Question 10 Which of the following devices would be used to manage a corporate WLAN? A wireless NAS A wireless bridge A wireless router 12/4/22, 10:26 PM Domain 2.0 Network Implementations Quiz: 22/SP-CTS-1305-61176 Intro to Networking Intro to Networking.html 6/6 A wireless controllor Quiz Score: 50 out of 50 [Show More]

Last updated: 2 years ago

Preview 1 out of 6 pages