Mark Scheme
Results
Summer 2022
Pearson Edexcel GCSE
In Physics (1PH0) Paper 1H
Pearson: helping people progress, everywhere
Pearson aspires to be the world’s leading learning company. Our aim is to help everyo
...
Mark Scheme
Results
Summer 2022
Pearson Edexcel GCSE
In Physics (1PH0) Paper 1H
Pearson: helping people progress, everywhere
Pearson aspires to be the world’s leading learning company. Our aim is to help everyone
progress in their lives through education. We believe in every kind of learning, for all kinds of
people, wherever they are in the world. We’ve been involved in education for over 150 years,
and by working across 70 countries, in 100 languages, we have built an international
reputation for our commitment to high standards and raising achievement through
innovation in education. Find out more about how we can help you and your students at:
www.pearson.com/uk
Summer 2022
Publications Code 1PH0_1H_2206_MS
All the material in this publication is copyright
© Pearson Education Ltd 2022
General Marking Guidance
• All candidates must receive the same
treatment. Examiners must mark the first candidate in
exactly the same way as they mark the last.
• Mark schemes should be applied positively. Candidates
must be rewarded for what they have shown they can
do rather than penalised for omissions.
• Examiners should mark according to the mark scheme
not according to their perception of where the grade
boundaries may lie.
• There is no ceiling on achievement. All marks on the
mark scheme should be used appropriately.
• All the marks on the mark scheme are designed to be
awarded. Examiners should always award full marks if
deserved, i.e. if the answer matches the mark
scheme. Examiners should also be prepared to award
zero marks if the candidate’s response is not worthy of
credit according to the mark scheme.
• Where some judgement is required, mark schemes will
provide the principles by which marks will be awarded
and exemplification may be limited.
• When examiners are in doubt regarding the application
of the mark scheme to a candidate’s response, the team
leader must be consulted.
• Crossed out work should be marked UNLESS the
candidate has replaced it with an alternative response.
Mark schemes have been developed so that the rubrics of each mark scheme reflects the
characteristics of the skills within the AO being targeted and the requirements of the
command word. So for example the command word ‘Explain’ requires an identification of a
point and then reasoning/justification of the point.
Explain questions can be asked across all AOs. The distinction comes whether the
identification is via a judgment made to reach a conclusion, or, making a point through
application of knowledge to reason/justify the point made through application of
understanding. It is the combination and linkage of the marking points that is needed to
gain full marks.
When marking questions with a ‘describe’ or ‘explain’ command word, the detailed marking
guidance below should be consulted to ensure consistency of marking.
Assessment
Objective
Command Word
Strand Element Describe Explain
AO1* An answer that combines the
marking points to provide a
logical description
An explanation that links
identification of a point with
reasoning/justification(s) as
required
AO2 An answer that combines the
marking points to provide a
logical description, showing
application of knowledge and
understanding
An explanation that links
identification of a point (by
applying knowledge) with
reasoning/justification
(application of understanding)
AO3 1a and
1b
An answer that combines points
of interpretation/evaluation to
provide a logical description
AO3 2a and
2b
An explanation that combines
identification via a judgment to
reach a conclusion via
justification/reasoning
AO3 3a An answer that combines the
marking points to provide a
logical description of the
plan/method/experiment
AO3 3b An explanation that combines
identifying an improvement of
the experimental procedure
with a linked
justification/reasoning
*there will be situations where an AO1 question will include elements of recall of
knowledge directly from the specification (up to a maximum of 15%). These will be
identified by an asterisk in the mark scheme.
Qustion
Number
Answer Mark
1a
B
Once DTP redraw image, crop and insert here.
A is not correct because the angle of incidence is not equal
to the angle of reflection
C is not correct because glass is more optically dense than
air
D is not correct because glass is more optically dense than
air
(1)
AO1
Question
Number
Answer Additional guidance Mark
1(b)(i) substitution (1)
18.0 ± 1
7.0 ± 1
OR
3.5±0.2
1.4±0.2
evaluation (1)
2.6 ± 0.5
award full marks for
correct answer
without working
(2)
AO2
Question
Number
Answer Additional
guidance
Mark
1(b)(ii) a description to including one pair of:
use different lens/replace lens (1)
{higher power / shorter focal length /
fatter / thicker / more curved / greater
refractive index / more convex} lens (1)
OR
change the distance / move the lens /
move the object (1)
further away (from the object/lens) (1)
accept
stronger
curvature of
lens
increased (2)
increase
distance
between
object and
lens (2)
(2)
AO3
Question
Number
Answer Additional guidance Mark
1(c) substitution (1)
1
f
=
20+40
20×40
evaluation of 1
f
(1)
0.075
evaluation of f (1)
13 (cm)
accept
1
?
=
60
800
OR 1
?
=
3
40
accept
13.3 (cm)
13.33 (cm)
power of ten error on 13
gains 2 marks
0.075 on answer line
gains 2 marks
power of ten error on
0.075 gains 1 mark
40
3
scores 2 marks
award full marks for
correct answer without
working
(3)
AO2
(Total for Question 1 = 8 marks)
Question
Number
Answer Mark
2(a)
B. when there are energy transfers, the total energy
does not change
A is not correct because the total energy does not reduce
C is not correct because the total energy does not reduce
D is not correct because the total energy does not increase
(1)
AO1
Question
Number
Answer Additional
guidance
Mark
2(b)(i) a diagram showing:
apparatus labelled to include three from
• thermometer
• water
• insulator / sand / sawdust /
material
• (copper) can
(1)
thermometer in the water (1)
arrangement for water and insulator in
and between copper cans (e.g. as in
diagram below) (1)
independent of
arrangement
ignore kettle and
stop clock
accept reverse
positions for
water and
insulator
(3)
AO2
Question
Number
Answer Additional guidance Mark
2(b)(ii) any three factors from:
{mass / volume} of water (1)
{volume / thickness / mass}
of insulators / materials (1)
{starting / initial} temperature
of water (1)
time interval / temperature
change (1)
accept amount / specified
values / “how much”
accept amount / specified
values / “how much”
accept temperature of hot /
boiling water / specified
values
accept specified values of
interval or change
unqualified “same time” is
insufficient
(3)
AO3
Answer Additional guidance Mark
2(c) a description giving
as the density (of expanded
polystyrene) increases the
(thermal) conductivity decreases
(1)
non-linear /
gradient decreases /
at a decreasing rate /
levels off /
plateaus /
becomes (almost) constant
(1)
ORA
allow inversely
proportional / exponential
for non-linear in this
context
ignore negative correlation
unqualified quoted values
are insufficient
(2)
AO2
Total for Question 2 = 9 marks
Answer Additional guidance Mark
3(a)(i) an explanation linking two
from:
(wet road means) less / no
friction (between tyres and
road) (1)
(wet weather means)
increased stopping distance
(1)
(slower speed means)
shorter braking / stopping
distance (1)
(dry weather / slower
speed) reduces possibility
of skidding / sliding / idea
of losing control / crashing
(1)
accept reverse arguments
throughout
accept (road) more slippery /
less grip
accept idea of reduced visibility
accept braking or thinking
distance in this context
accept takes longer to slow
down / stop
ignore harder to brake
(2)
AO1
Answer Additional guidance Mark
3(a)(ii) convert either distance or time
(1)
(31 m =) 31
1000 (km)
or 0.031 (km)
(130 km =) 130 × 1000 (m)
or 130 000 (m)
(2)
AO2
OR OR
(1 s =) 1
3600 (h) = 1
60×60
(h)
or 0.000 28 (h)
evaluation (1)
(1 h =) 60 x 60 (s)
or 3600 (s)
(31m/s =) 110 (km/h) (130 km/h =) 36(.1)(m/s)
accept 111.6 or 112 (km/h)
for 2 marks
if no other marks awarded
accept 1860 m/min and
2167 m/min for 1 mark each
award full marks for the
correct answer without
working
Answer Additional guidance Mark
3(a)(iii) select and substitute into
distance travelled = average speed x time
(1)
46 = 31 x t
rearrangement and evaluation
(1)
(t=) 1.48(3) (s)
evaluation given to 2 sf (1)
(t =) 1.5 (s)
31 =
46
t
(t =) 46
31
award two
marks for the correct
evaluation without working
any answer written to 2 sf
independent mark
(3)
AO2
1.5 scores 3 marks
1.4
1.50
0.67
1400
scores 2 marks
scores 2 marks
scores 2 marks
scores 2 marks
0.673(9)
1426
scores 1 mark
scores 1 mark
Total for Question 3 = 7 marks
Question
Number
Answer Mark
4(a)(i)
D gamma
A is not correct because alpha cannot pass through and out
of the body
B is not correct because beta plus cannot pass through and
out of the body
C is not correct because beta minus cannot pass through
and out of the body
(1)
AO1
Answer Additional guidance Mark
4
(a)(ii)1
CLIP
with
(a)(ii)2
decays too quickly to give a
reading (1)
accept
(half-life) not long enough for
reading to be taken
ignore disappear after 12 min
(1)
AO1
Answer Additional guidance Mark
4
(a)(ii)2
CLIP
with
(a)(ii)1
stays in the body too long
(1)
accept
could harm / damage other
organs
patients stay radioactive for too
long
so the patient does not get too
high a dose of radiation
(1)
AO1
Answer Additional guidance Mark
4(a)(iii) Two from:
shielding (1)
time limiting exposure (1)
distance limiting exposure
(1)
wear PPE / protective
clothing
(1)
accept
stand behind barriers / store
(source) in lead box
radiation monitoring badges
leave the room / go outside /
stay away from the patient /
use tongs
lead aprons / gloves
ignore goggles / masks
(2)
AO1
Answer Additional guidance Mark
4(b)(i) an explanation linking:
(control rods) absorb
neutrons (1)
(so) fewer (neutrons)
available for chain reaction
(1)
ignore slow down the nuclear
chain reaction
accept (control rods) block
neutrons
accept neutrons can’t pass
through (control rods)
fewer fission(s) (reactions)
(2)
AO1
Answer Additional guidance Mark
4(b)(ii) 4(.0 × 103
)(× 100)
3(.0 × 107)
(1)
1.3 × 10-2
(%) (1) 0. 013 (%)
allow 0.01 (%)
power of ten error scores 1
mark maximum
award full marks for the correct
answer without working
(2)
AO2
Answer Additional guidance Mark
4(b)(iii) A description to include:
(from) kinetic energy (of fission
fragments) (1)
(transferred to) thermal energy
(of coolant) (1)
accept references to
energy stores
accept energy in nuclear
store
accept nuclear energy /
gamma radiation energy /
binding energy / mass
(to) thermal store (in
coolant)
accept heat for thermal
if no other marks awarded
allow steam transfers
thermal energy/heat from
reactor to kinetic energy of
turbine for 2 marks
(2)
AO1
Total for Question 4 = 11 marks
Answer Additional guidance Mark
5(a)(i)
selection and substitution (1)
( a = ) 82 ( - 0)
36
evaluation (1)
2.3 (m/s2
)
note: this is a “show that”
question
accept any value that rounds
to 2.3 (m/s2
)
accept 2.2 (m/s2
) for 1 mark
maximum
answer of 2 (m/s2
) without a
substitution scores 0 marks
(2)
AO2
Answer Additional guidance Mark
5(a)(ii)
substitution (1)
822
(– 0
2
) = 2 x 2.3 x x
rearrangement (1)
(x) =
822
( - 0
2
)
2×2.3
evaluation (1)
1500 (m)
allow substitution and
rearrangement in either order
accept 2, 2.2, 2.27, 2.3 for “a”
throughout
(x) =
v
2
( - u
2
)
2×a
ignore sign
accept
1460 (m)
allow answers in the ranges:
1460 (m) to 1482 (m)
1520 (m) to 1530 (m)
1680 (m) to 1700 (m)
award full marks for correct
answer without working
(3)
AO2
Answer Additional guidance Mark
5(a)(iii) one statement from
take off aborted (1)
mechanical/engine failure
(1)
acceleration reduced (1)
weather related reasons (1)
larger mass / heavier plane
/ extra passengers (1)
(longer runway required)
for landing (1)
any other sensible suggestion
(1)
AO3
Answer Additional guidance Mark
5(b)(i) selection and substitution (1)
(KE) = x 3.6 x 105
x 71
2
evaluation (1)
9.1 x 108
(J)
accept 9.07 x 108
(J)
accept 907 380000 (J)
award full marks for correct
answer without working
do not award a power of ten
error
(2)
AO2
Answer Additional guidance Mark
5(b)(ii) any one from:
mechanically (to the
thermal store) (1)
(heating) due to air
resistance / friction (1)
thermally (1)
allow dissipated
thermal (store) / heat (energy)
(1)
AO2
Total for Question 5 = 9 marks
Question
Number
Answer Mark
Q6 C
both Redshift and CMB can be explained by the Big
Bang theory
A is not correct because CMB can be explained by the Big
Bang
B is not correct because the Steady State theory cannot
explain CMB
D is not correct because the Steady state theory can
explain red shift
(1)
AO1
Answer Additional
guidance
Mark
6(b)(i)
substitution (1)
(z=)
6.72×10-7
- 6.56×10-7
6.56×10-7
OR
(z=)
0.16×10-7
6.56×10-7
evaluation (1)
0.024
allow
(z=)
6.72-6.56
6.56
OR
(z=)
0.16
6.56
do not accept 0.025
on its own
accept 0.0243 /
0.02439 / 0.0244
award full marks for
the correct answer
without working
(2)
AO2
Answer Additional guidance Mark
6(b)(ii) substitution (1)
(v) = 0.024 x 3(.00) x108
evaluation (1)
7.2 x 106
(m/s)
accept
(v) = 0.025 x 3 x108
(v) = 0.02 x 3 x108
accept answers which
round to:
6.0 x106
(m/s)
7.5 x106
(m/s)
7.3 x106
(m/s)
7.2 x106 (m/s)
award full marks for
the correct answer
without working
(2)
AO2
Answer Additional guidance Mark
6b(iii) An explanation linking :-
the redshift / z (value) will
be larger (1)
the galaxy is moving (away)
at a higher velocity /
recession velocity increased
(1)
bigger (increase in) wavelength
bigger difference in wavelength
longer wavelength
moving (away) faster
(2)
AO1
Answer Additional guidance Mark
6(c) an explanation linking:
telescopes are above Earth / in
space / outside the Earth’s
atmosphere (1)
less interference from dust /
clouds (1)
wavelengths that are absorbed by
Earth’s atmosphere (microwaves /
IR / UV) (1)
can view the whole sky (1)
allow any other sensible
benefit
allow atmospheric
distortion/ (light/air)
pollution
accept named examples
of satel
[Show More]