ACQ 101 -Mod 4 Questions and Answers 100% Pass

Document Content and Description Below

ACQ 101 -Mod 4 Questions and Answers 100% Pass Which of the following are purposes of the Defense Acquisition System? (Select all that apply) ✔✔Develop technology, Produce weapons system, Provi... de logistics support Documents produced during the JCIDS process are used to support Defense Acquisition System milestone decisions. ✔✔True Which of the following are characteristics of the Materiel Solution Analysis phase? (Select all that apply) ✔✔Promising technologies are analyzed to determine which one is best suited to meet validated requirements, A PM is selected and a program office is established, The AoA is conducted. The results of the AoA provide the basis for which of the following? ✔✔Acquisition Strategy Which one of the following is considered a primary goal of an Acquisition Strategy? ✔✔Minimize the time and cost needed to satisfy validated needs The AS must be approved by the MDA prior to what? ✔✔Release of a formal solicitation Which term is defined as the minimum acceptable value for performance that is necessary to satisfy an identified need? ✔✔Threshold Which of the following are considered parameters of the Acquisition Program Baseline? (Select all that apply) ✔✔Cost, Schedule, Performance A successful Milestone A decision leads to entry into which phase? ✔✔Technology Maturation and Risk Reduction The MDA must approve which of the following for a program to successfully complete Milestone A? (Select all that apply) ✔✔The proposed materiel solution, The Acquisition Strategy, A Life Cycle Sustainment Plan When does a program enter the TMRR phase? ✔✔When the AoA has been completed and the MDA has approved the AS Which of the following are goals of the TMRR phase? ✔✔Reduce technology risk, Demonstrate critical technologies through prototyping, Conduct a preliminary design review True or false? One of the requirements for a project to exit the TMRR phase is that the technology has been demonstrated in a relevant environment. ✔✔True What is the purpose of Milestone B? ✔✔Initiates engineering and manufacturing development phase Which of the following are key considerations of the EMD phase?(Select all that apply) ✔✔Completes all needed hardware and software detailed design, Systemically retires any open risks, Prepares for production and deployment Which of the following is a responsibility of the PM during the EMD phase? ✔✔Finalizing designs of the product support elements Which of the following are considerations for Milestone C?(Select all that apply) ✔✔Cost estimates, Environmental issues, Manpower estimates An updated Acquisition Program Baseline is required for Milestone C approval. ✔✔True MDA decisions made during the Production and Deployment phase are documented where? ✔✔Acquisition Decision Memorandum Which of the following are key considerations of Low Rate Initial Production? (Select all that apply) ✔✔Establishes an initial production base for the system, Provides OT&E test articles, Provides an efficient ramp-up to full rate production Acquisition programs enter the Full Rate Production and Deployment after completing the Life Cycle Sustainment Plan. ✔✔False The Operations and Support phase is based on what? ✔✔An MDA-approved LCSP True or false? PMs are encouraged but not required to establish organic depot maintenance capabilities. ✔✔False Which of the following are PM considerations during the Disposal?(Select all that apply) ✔✔Complete reuse or recycling of system components and materials, Sale or donation to the private sector or other governments, Waste disposal A favorable Milestone C decision authorizes entry to this phase. ✔✔What is production and deployment? This is a true statement about the Acquisition Program Baseline (APB). ✔✔What is the PM, in coordination with the user, prepares the APB at program initiation? During this phase, the appropriate operational authority will declare Initial Operational Capability (IOC) when the defined operational organization has been equipped and trained, and is determined to be capable of conducting mission operations. ✔✔What is the Production and Deployment phase? The Acquisition strategy defines the increment about to be undertaken, as well as subsequent increments in this requirement. ✔✔What is the time-phased needs? This person prepares the Acquisition Strategy during the MSA. ✔✔Who is the Program Manager? The acquisition document that states each PM must prepare and the MDA must approve an Aquisition Strategy (AS). ✔✔What is the DoDI 5000.02? This is used to create the Acquisition Program Baseline (APB). ✔✔What is the Defense Acquisition Management Information Retrieval (DAMIR)? Prepared at program initiation and revised to subsequent milestone reviews, program restructuring, or unrecoverable deviations. ✔✔What is the APB? This is the agreement between the MDA and Program Manager that will be used for tracking a program. ✔✔What is the Acquisition Program Baseline? DoD defines and validates requirements through the Joint Capabilities Integration and Development System (JCIDS) and develops technology, produces weapons systems, and provides logistics support through the Defense Acquisition System. ✔✔True The Materiel Solution Analysis Phase (MSA) ends when the Analysis of Alternatives (AoA) has been completed, a materiel solution option for the capability need is recommended, and the phase-specific entrance criteria for the initial review milestone have been satisfied. ✔✔True In order for the Program Manager to maximize affordability from program initiation through post-production, the Acquisition Strategy must evolve and become increasingly more definitive. ✔✔True The purpose of the Technology Maturation and Risk Reduction (TMRR) phase is to reduce technology risk through competitive prototyping of critical technologies. ✔✔True When is the Acquisition Program baseline (APB) prepared? ✔✔Prepared at program initiation and revised to subsequent milestone reviews, program restructuring, or unrecoverable deviations What is the purpose of the Milestone C decision? ✔✔For major systems, the Department of Defense (DoD) is committed to production of the system and entry into Low-Rate Initial Production (LRIP) What is the purpose of the Milestone C decision? ✔✔For major systems, the Department of Defense (DoD) is committed to production of the system and entry into Low-Rate Initial Production (LRIP) The Operations and Support Phase begins after the production or deployment decision and is based on which Milestone Decision Authority (MDA) approved document? ✔✔Life Cycle Sustainment Plan (LCSP) [Show More]

Last updated: 2 years ago

Preview 1 out of 8 pages