NFPA 10 2018 Ch 6 Exam 27 Questions with Verified Answers,100% CORRECT

Document Content and Description Below

NFPA 10 2018 Ch 6 Exam 27 Questions with Verified Answers Maximum Travel Distance - CORRECT ANSWER Maximum travel distance by foot to a Fire Extinguisher You can fabricate Hangers and Brackets i ... n the field? - CORRECT ANSWER False What is the appropriate height to install an Extinguisher that is Over 40lb? - CORRECT ANSWER The top of the Extinguisher shall not be more than 3 1/2 feet above the floor. What is the appropriate height to install an Extinguisher that is Less than 40lb? - CORRECT ANSWER The top of the Extinguisher shall not be more than 5 feet above the floor. In no case shall the clearance between the bottom of the hand portable Extinguisher and the floor be less than 4 inches? - CORRECT ANSWER True Closed Cabinet Extinguisher Housing that are exposed to elevated temperatures Shall be: - CORRECT ANSWER Provided with screened opening and drains in the cabinet. Maximum Travel Distance for Placement of a Class B Extinguisher is Based on: - CORRECT ANSWER Extinguisher Rating, Max Travel distance, Type of Hazard Travel Distance to a Class B Extinguisher in a Class B Hazard shall not exceed: - CORRECT ANSWER 50 feet Portable Extinguishers shall not be the sole protection for flammable liquid hazards of appreciable depth when: - CORRECT ANSWER The surface area exceeds 10 feet The maximum surface area shall not exceed 20 feet when: - CORRECT ANSWER There are personnel trained in extinguishing fires in the protected hazard areas and are located on the premises Cooking Hazards fall under what Class of Hazard - CORRECT ANSWER K Maximum distance to and Extinguisher installed for a Class K hazard is: - CORRECT ANSWER 30 feet Extinguishers Shall be installed so that the ___________ are facing Outward. - CORRECT ANSWER Operating Instructions Extinguishers containing only plain water shall be protected to temperatures as low as - CORRECT ANSWER -40F by the addition of Antifreeze What type of solutions shall not be used in Stainless Steel Extinguishers? - CORRECT ANSWER Calcium Chloride Class A and D Fire Extinguishers shall be located a maximum travel distance of ______ feet from Hazards. - CORRECT ANSWER 75 Up to Two Water-type extinguishers, each with a 1-A rating, shall be permitted to fulfill the requirements of One 2-A rated extinguisher. True or False - CORRECT ANSWER True Two 2.5 Gal Water-type extinguishers shall be permitted to fulfill the requirement of One 4-A rated extinguisher. True or False - CORRECT ANSWER True Up to three AFFF or FFFP extinguishers of at least 2.5 gal capacity shall be permitted to fulfill _______ - CORRECT ANSWER Extra Hazard requirements Up to two AFFF or FFFP extinguishers of at least 1.6 gal capacity shall be permitted to fulfill _______ - CORRECT ANSWER Ordinary Hazard requirements What is the Max Travel distance to B rated extinguishers? - CORRECT ANSWER 50 Feet Portable extinguishers shall not be installed as the sole protection for flammable liquid hazards of appreciable depth where the surface area exceeds - CORRECT ANSWER 10 Feet Flammable Liquid Hazards of appreciable depth, a class B extinguisher shall be provided on the basis of - CORRECT ANSWER 2 numerical units of Class B extinguishing potential per 1 foot of flammable liquid surface. AFFF or FFFP extinguishers shall be permitted to be provided on the basis of 1-B of - CORRECT ANSWER 1 Foot of hazard Up to three AFFF or FFFP extinguishers shall be permitted to fulfill the requirements, provided the sum of the Class B ratings - CORRECT ANSWER Meets or Exceeds the value required for the largest hazard area. Where there are Obstacles, 3D or pressure fire hazards the maximum travel distance to a Class B extinguisher shall not exceed - CORRECT ANSWER 30 Feet Maximum travel distance from extinguishers to Class K hazards shall be no more than - CORRECT ANSWER 30 Feet [Show More]

Last updated: 2 years ago

Preview 1 out of 3 pages