Fire Instructor > EXAM > NICET LEVEL 1 FIRE ALARM SYSTEMS EXAM STUDY QUESTIONS WITH REVISED ANSWERS NEW UPDATE GUARANTEED PAS (All)

NICET LEVEL 1 FIRE ALARM SYSTEMS EXAM STUDY QUESTIONS WITH REVISED ANSWERS NEW UPDATE GUARANTEED PASS | RATED A+

Document Content and Description Below

NICET LEVEL 1 FIRE ALARM SYSTEMS EXAM STUDY QUESTIONS WITH REVISED ANSWERS NEW UPDATE GUARANTEED PASS | RATED A+ A pathway shall be designated as Class when it does not include a redundant path and ... operational capability stops at a single open and operational capability is maintained during the application of a single ground fault? - Answer>>> Class B EMT shall be securely fastened in place at least every feet. - Answer>>> 10 feet The minimum clear safe working distance from an energized 240 volt breaker panel that has the cover removed is ft from the wall in front the panel. - Answer>>> 3 feet Wall mounted audible appliances shall have their tops above the finished floors at heights of not less than inches and below the finished ceilings at distances of not less than 6 inches? - Answer>>> 90 inches A minimum db ambient sound level with a 6 hour exposure time requires hearing protection? - Answer>>> 92 db Ground fault circuit interrupters are required for all 120 volts power tools on a construction site unless . - Answer>>> The work area is dry Consider the use of a multimeter in troubleshooting a fire alarm circuit. The circuit has an end of the line resistor with a value of 4.7ohms. With the circuit disconnected from power, the positive leg of a fire alarm circuit is metered to a known ground with the meter set to the 10kohm setting. Consider that the circuit is properly functioning. The expected reading on the multimeter is ohms? - Answer>>> Infinity Including new systems and addition or alterations to existing systems, which of the following is not required to be delivered to the owner upon final acceptance of the system? - Answer>>> Inspection & Testing records, Central station history log According to NFPA 72, section of the record of completion is used to note the input voltage? - Answer>>> Section 5.1.11 Which of the following is not one of the criteria to be a designated a confined space? - Answer>>> A room that locks when the door is closed. According to NFPA 72 the onsite location of the required record documents and specific software is notes in section of the Record of Completion? - Answer>>> Section 3 According to NFPA 72 the Record of Completion section 12.1 is required to be signed by ? - Answer>>> System Installation Contractor [Show More]

Last updated: 11 months ago

Preview 4 out of 12 pages

Buy Now

Instant download

We Accept: