Abstract
The objective of this experiment was to observe the precipitate hardening of a 6061 Aluminum
alloy and compare the results to other samples of 6061 Al exposed to different heat treatment
processes. Precipitat
...
Abstract
The objective of this experiment was to observe the precipitate hardening of a 6061 Aluminum
alloy and compare the results to other samples of 6061 Al exposed to different heat treatment
processes. Precipitate hardening is a heat treatment process that produces uniformly dispersed
particles within a metal’s grain structure (Wojes 2017). These dispersed particles restrict the
dislocation motion, which in turn strengthens the metal. The experiment will determine each
specimen’s strength and hardness by performing a three-point bend test and a Vickers
Microhardness test. After conducting the experiment, the materials’ strengths are compared. The
untreated sample was the strongest, with an extension of -24.52 mm and was able to withstand a
load of approximately 700N before fracture. The annealed sample was the weakest, with an
extension of -23.92 mm and was able to withstand a load of only approximately 250N before
fracture. In addition, the elastic modulus for the samples tested were relatively similar. Through
our results, it can be determined that different methods of heat treatment have different effects on
the strengths of different materials.2
Table of Contents
Introduction 3
Figure 1 4
Figure 2 5
Methodology 7
Results 8
Figure 3 8
Figure 4 9
Discussion 10
Conclusion 13
References 143
Introduction
The purpose of the experiment is to examine the effects of strengthening techniques, such
as the precipitate hardening mechanism, and how it increases an aluminum alloy’s hardness and
strength. The increase of strength and hardness, due to precipitation hardening, are investigated
through the performance of the three-point bend test, as well as demonstrated in the Vickers
Microhardness test, on five 6061 Aluminum alloy specimens after the conduction of different
heat treatments.
The material examined in this lab, 6061 Aluminum, is chemically composed of 97.9%
aluminum, 1% magnesium, 0.60% silicon, 0.28% copper, and 0.20 chromium. Aluminum is
characterized by a low density of 2.7 g/cm^3 , is highly conductive both electrically and
thermally (159 W/mK), and is relatively resistant to corrosion (AZoM, 2012). Aluminum has a
Face-Centered Cubic (FCC) crystal structure, and since FCC materials are fairly temperatureindependent with respect to their plasticity, aluminum can retain its ductility at fairly low
temperatures (Callister Jr. & Rethwisch, 2013)
[Show More]