Contractor’s License General B Trade
Practice Exam #2 Graded A
A ladder should extend a minimum of ____ above the top of a trench or excavation. ✔✔3'
According to OSHA, shoring lumber shall be _______. ✔✔select struct
...
Contractor’s License General B Trade
Practice Exam #2 Graded A
A ladder should extend a minimum of ____ above the top of a trench or excavation. ✔✔3'
According to OSHA, shoring lumber shall be _______. ✔✔select structural
Cal/OSHA inspectors cannot, under most circumstances: ✔✔enter a business outside of normal
business hours
Every employer is required to post Material Safety Data Sheets: ✔✔on each job site
Handrails must be installed on all open sides of a scaffold if workers are subject to falls of _____
or more. ✔✔7 1/2
When boom-type equipment is in operation, how close can it be to high voltage power lines?
✔✔10'
How should you store oily mops or rags at the job site? ✔✔In a closed metal container
If a Cal/OSHA inspector is coming to inspect a job site, it is best for the contractor to:
✔✔personally walk through the job site and check the work
In most cases, a crane cannot lift more than _____ % of its capacity. Always consult the
manufacture's operations manual and all applicable codes before using a crane and never attempt
to use one without being thoroughly trained and certified to operate the crane. ✔✔75
In stable oil, a trench that is _______ or deeper requires shoring. ✔✔5 Feet
On a construction site, flammable liquids can be found in ______ containers. ✔✔red
Prior to erecting scaffolding, it is best to consult the: ✔✔Construction Safety Orders
The rule of thumb that is used when digging a trench near another excavation is that the
horizontal distance from the trench to the excavation in no less than: ✔✔the depth of the trench
What agency requires Material Safety Data Sheets? ✔✔Cal/OSHA
What is MSDS? ✔✔Material Safety Data Sheet
What is painted red on a construction site? ✔✔flammable substances
What is the danger of LP gas? ✔✔it collects near the floor
When boom-type equipment is in transit, how close can it be to high voltage power lines? ✔✔6'
What is the minimum grade of lumber which may be used for trench shoring? ✔✔#2 Douglas fir
What is the minimum safe distance required for people working near high voltage power lines?
✔✔6'
When backing up a truck at the construction site you should: ✔✔sound the automatic backup
alarm or bells
When should you report an occupational injury on CAL/OSHA Form 5020? ✔✔when medical
help beyond first aid is required
When welding in confined spaces, the main danger is _______. ✔✔too many fumes
When welding you gloves should be: ✔✔made of heavy leather or hide
When you are working on or near an electrical service panel what should you assume? ✔✔the it
is unsafe
Where would you find the requirements for scaffolds? ✔✔Cal/OSHA Construction Safety
[Show More]