Sample questions from all CSLB trade
exams already passed
The lifting lines should be as vertical as possible ✔✔When using a crane to lift a 12,000-gallon
tank out of the excavation, what is the preferable position of
...
Sample questions from all CSLB trade
exams already passed
The lifting lines should be as vertical as possible ✔✔When using a crane to lift a 12,000-gallon
tank out of the excavation, what is the preferable position of the rigging lines attached to the
tank's lifting eyes?
A. One lifting line should be horizontal
B. The lifting lines should be as far apart as possibles
C. The lifting lines should be as horizontal as possible
D. The lifting lines should be as vertical as possible
Material that contains more than 1% asbestos ✔✔Which of the following describes surfacing
ACM?
A. Material that contains more than 1% asbestos
B. Material that contains more than 0.1% asbestos
C. Material that contains more than 0.01% asbestos
D. Material that contains more than 0.001% asbestos
Inform each of the employers about the asbestos work being performed ✔✔When removing
asbestos as a multi-employer work site, the asbestos abatement contractor must do which of the
following?
A. Ensure that all other employers leave the site
B. Inform the local Cal/OSHA office within 48 hours
C. Ensure that all asbestos is removed
D. Inform each of the employers about the asbestos work being performed.
When airborne exposure exceeds the TWA and excursion limits ✔✔When must a contractor
provide and require the use of protective clothing?
A. When Class II work requires removal of ACM exceeding 10 square feet
B. When airborne exposure exceeds the TWA and excursion limits
C. When Class II work requires removal of TSI exceeding 25 linear feet
D. When a negative exposure assessment is produced
Aluminum ✔✔Alternating current would most likely be used in GTAW to weld which of the
following metals?
A. Low carbon steel
B. Deoxidized copper
C. Aluminum
D. Stainless steel
1/8" ✔✔WHat is the minimum thickness of steel that is covered by the AWS D1.1 Structural
Steel welding code?
A. 1/8"
B. 1/4"
C. 5/16"
D. 3/8"
Shorten the stickout ✔✔When welding with FCAW, how can the operator control excess
spatter?
A. Change the drag angl
[Show More]