Welding Safety test Questions and
Answers 100% Pass
It is not good to practice ______ when lifting...
A) bend your back
B) lift with your leg muscles
C) wear a back brace
D) keep your back straight
E) lift over 35
...
Welding Safety test Questions and
Answers 100% Pass
It is not good to practice ______ when lifting...
A) bend your back
B) lift with your leg muscles
C) wear a back brace
D) keep your back straight
E) lift over 35 pounds ✔✔A
All hand tools should be inspected for ______
A) size
B) loose parts
C) cleanliness
D) all of the above ✔✔D
_____ is a recommended material for protective clothing for welding or cutting
A) nylon
B) polyester
C) leather
D) asbestos ✔✔C
Which of the following is an appropriate type of face and eye protection for resistance welding
A) lightly tinted welding goggles
B) welding helmet with a #6 filter lens
C) welding helmet with a #10 filter lens
D) welding helmet with a #14 filter lens ✔✔C
Which of the following factors do not promote safety in the shop...
A) staying heathly in the mind and body
B) becoming well trianed in the required job or task
C) having a good attitude towards safety abd safety and rules
D) thinking about pleasant things to pass tge time ✔✔D
Which of the following safety practices (are) recommended when working around electricity
A) let only trained tech. Do repairs on electrical equipment
B) always check for loose connections and worn insulation with the power off
C) assume all electricity is dangerous
D) voltages of 220 volts or more should be clearly marked as dangerous
E) all of the above ✔✔E
Its recommended that ____ be worn while resistance welding
A) eye protection
B) pants without cuffs
C) a cap
D) all of the above ✔✔D
___ must be stored in an approved steel cabinet
A) gas cylinders
B) cleaning chemicals
C) welding rods
D) leathers ✔✔B
___ should be used to light ab oxyfuel gas flame
A) a wooden match
B) a book match
C) a spark lighter
D) another torch
E) an electric arc ✔✔C
Gas cylinders should be _____
A) stored in an upright position
B) always moved with a safety cap in place
C) fasten woth chains or steel bands
D) all of the above ✔✔D
Which of the following metals may create toxic or deadly fumes when welded?
A) Beryllium
B) lead
C)cadmium
D) all of the above ✔✔D
Which of the following are dangerous light rays developed during Oxyfuel gas welding or
cutting?
A) incandescents
B) fluorescent
C) ultraviolet
D) all of the above ✔✔C
Fire extinguishers and fire blankets should be mounted on a surface that is painted ______
A) orange
B) yellow
C) yellow and black
D) red
E) light blue ✔✔D
_____ should be covered during job or task training
A) safety Hazards
B) proper operation sequence
C) correct placement of hands and feet
[Show More]