Automotive Chapter 3 Questions and
Answers Graded A
_____ or _____ maintained tools will hurt an automotive technician's on-the-job performance
✔✔Greasy, oily
Name three basic parts of a toolbox ✔✔Large lower roll-ar
...
Automotive Chapter 3 Questions and
Answers Graded A
_____ or _____ maintained tools will hurt an automotive technician's on-the-job performance
✔✔Greasy, oily
Name three basic parts of a toolbox ✔✔Large lower roll-around cabinet, upper tool chest, a
small carrying tray
A toolbox's ________ is for holding frequently used tools so thye can be carried to the job in a
single trip ✔✔Small carrying tray
In what part of a toolbox are large power tools normally kept? ✔✔Lowe roll-around
What is the basic function of tool holders? ✔✔Help organize small tools
_________ is determined by measuring across the wrench jaws ✔✔Wrench size
What type of wrench is designed for use with hammer? ✔✔Special slug wrench
Describe an open-end wrench ✔✔Has an open jaw on both ends
Why is each end of an open-end wrench set at an angle? ✔✔The wrench can be turned over after
each swing to get a new "bite" on the bolt head
Box-end wrenches are available with either ____-point or _______-point openings ✔✔6, 12
Open-end wrench ✔✔
Box-end wrench ✔✔
Combination wrench ✔✔
Tubing or line wrench ✔✔
A socket is a cylinder-shaped, box-end tool for removing and installing _____ and _____
✔✔Bolts, nuts
A(n) ______ is a swivel that lets the socket wrench reach around obstructions ✔✔Universal joint
A(n) ______ wrench is an adjustable wrench used to grasp cylindrical objects ✔✔Pipe wrench
A(n) _____ wrench is used to turn set screws on pulleys, gears, and knobs ✔✔Allen wrench
A(n) _____ screwdriver has a single blade that fits into a slot in the screw ✔✔Standard
A(n) _____ screwdriver has two crossing blades the fit into a star-shaped screw slot ✔✔Phillips
A(n) _____ looks like a screwdriver, but it has a sharp, pointed tip ✔✔Frearson
How do you choose the correct screwdriver for the job? ✔✔You pick the one that is wide and
thick enough to completely fill the screw slot
Heavy-duty screwdrivers with a(n) _____ can withstand light hammering and prying ✔✔Full
shank
Pliers are used for _____ various parts ✔✔Gripping, cutting and crimping, holding and bending
_____ pliers are the most common pliers used by an automotive technician ✔✔Combination or
slip-joint
____ pliers are excellent for handling extremely small parts or reaching into highly restricted
areas ✔✔Needle nose
A(n) ____ hammer is the most common type of hammer used in automotive work ✔✔Ball Peen
When should a brass hammer be used? ✔✔When scarring the surface of a part must be avoided
For what purpose are chisels used? ✔✔Cutting off damaged or badly rusted nuts, bolts, and rivet
heads
A(n) ____ punch is used to drive pins, shafts, and metal rods part of the way out of a hole
✔✔Starting
A(n) _____ file with large cutting edges should be used on soft materials, such as plastic, brass,
and aluminum ✔✔Fine
[Show More]
.png)
.png)
