ME 488/688 - HW #5
Due Date: Friday 11/10/2017
Finite Wing
Problem 1.
The measured lift slope for the NACA 23012 airfoil is 0.1080 per degree, and the zero-lift angle
is ??=0 = -1.3°. Consider a finite wing using th
...
ME 488/688 - HW #5
Due Date: Friday 11/10/2017
Finite Wing
Problem 1.
The measured lift slope for the NACA 23012 airfoil is 0.1080 per degree, and the zero-lift angle
is ??=0 = -1.3°. Consider a finite wing using this airfoil, with AR=8 and taper ratio = 0.8.
Assume that ? = ?. Calculate the lift and induced drag coefficients for this wing at a geometric
angle of attack = 7°.
2
3
Problem 2
The Piper Cherokee (picture below) aircraft has a wing area of 170 ??2 and a wing span of 32
ft. Its maximum ross weight is 2450 lb. The wing uses an NACA 65-415 airfoil, which has a lift
slope of 0.1033 per degree and ??=0 = -3°. Assume ? = 0.12. If the airplane is crusing at 120
mi/h at standard see level at its maximum gross weight and in a straight-and-level flight,
1) Calculated the geometric angle of attack of the wing.
2) The span efficiency factor e for the complete airplane is generally much less than that for
the finite wing alone. Assume e=0.64. Calculated the induced drag for this airplane.
4
5
Review of Thermodynamics (Compressible Flow)
Problem 3.
Consider the isentropic flow over an airfoil. The freestream conditions are ?∞ = 245? and ?∞ =
4.35 × 104 ?/?2. At a point on the airfoil, the present is 3.6 × 104 ?/?2. Calculate the density
at this point.
6
Problem 4.
An airfoil is in a freestream where ?∞ = 0.61 ???, ?∞ = 0.819 ??/?3, and ?∞ = 300?/?. At
a point on the airfoil surface, the pressure is 0.5 atm. Assuming isentropic flow, calculate the
velocity at that point.
7
8
Problem 5.
Calculate the percentage error obtained if Problem 4 is solved using (incorrectly) the
incompressible Bernoulli equation.
[Show More]