what kind of magazine is used for 1.2, 1.3, and 1.4? ✔✔AGM
where do you look to find the table on chemical hazard symbol requirements? ✔✔yellow book, DA 385-
64
Which type of magazine is used to temporarily store the
...
what kind of magazine is used for 1.2, 1.3, and 1.4? ✔✔AGM
where do you look to find the table on chemical hazard symbol requirements? ✔✔yellow book, DA 385-
64
Which type of magazine is used to temporarily store the minimum amount of A&E necessary to safely
and efficiently conduct operations? ✔✔service and maintenance
Two of the greatest hazards to explosives are ✔✔fire and heat
Fire symbols are used to identify the type of hazard at a particular building or location based on their
shape. ✔✔make sure symbols are visible, silhouette is visible, post symbol representing the highest
hazard, interior location
Which of the following tasks are allowed inside a magazine? ✔✔remove/replace bands on bombs,
remove/replace grommets
Personnel want to open some of the boxes in the ECM you are visiting. They ask you if this is acceptable.
You tell them they can open containers of AE to ✔✔desiccant change-out as long as access to A&E isn't
allowed, visible inspection of CBU/CNUsYou enter a heated warehouse and see AE stacks placed next to the radiators. Is this practice permitted?
✔✔no needs to be 18inches apart
At which of the following locations are you allowed to store small rockets and missiles in any direction,
except pointed upward or toward the door? ✔✔none
It's July and you are at an AGM in the Nevada desert that contains rockets, rocket motors, and missiles.
This is probably not a safe practice because you know these items should not be stored in locations
where temperatures exceed ✔✔120F
AE is not normally stored in buildings being used for other purposes such as basements, other portions
of barracks, company supply rooms, etc ✔✔never mix, ECM can't touch walls, single lots stored together
Are items from compatibility groups C, E, and S compatible while in storage? ✔✔yes
Are items from compatibility groups D and F compatible while in storage? ✔✔yes
Battery, gasoline, or diesel-powered MHE can be stored in magazines and other suitable areas designed
for that purpose. The areas must be empty or only contain inert materials. What other requirements
apply? ✔✔10 ft apart, spaced to minimize fire, aisle kept clear
Which of the following statements regarding temporary storage of battery-powered MHE inside a
magazine with AE is true? ✔✔Not stored over four days, if not used.
Inspected after each workday.Shut down but battery cables cannot be disconnected.
Parked and secured at the maximum distance allowed from A&E.
Never stored in operating buildings containing exposed explosives.
You notice an MHE item that was last inspected seven months ago. How often must MHE pass a load
test to make sure it is capable of handling its intended load? ✔✔yearly
To operate MHE inside a magazine containing ammunition and explosives, all of these stipulations must
be met EXCEPT ✔✔the Operator must be a QASAS or Ammo Manager.
You are reviewing this planograph information before a site visit to the magazine. What is the explosive
weight limit for this magazine? ✔✔500,000
During your visit to the magazine you see an issue with the materiel in area A of this partial planograph.
How would you describe the coordinates of area "A" in your report? ✔✔BDCE
You are reviewing this planograph information before a site visit to the magazine. What is the total
amount of explosives contained in this magazine? ✔✔456, 658lbs
What are some general safety requirements for Government vehicles used to transport hazardous
materials? ✔✔engine off, block and brace after loading, verified with AMC drawingMotor vehicles that will carry which of the following hazard classes/divisions must first be inspected
using DD Form 626? ✔✔1.2, 1.3, 1.4
DOT requires placards be posted on the outside of all vehicles or railcars transporting AE off post. Where
are the posting requirements? How many emergency warning triangles must be onboard a vehicle
carrying ammunition or explosives? ✔✔4
When AE is at the interchange yard and cannot be stored within 24 hours of receipt, it must be located
where QD rules apply. The official receipt begins when ✔✔once it is accepted and move to its assigned
location
If AE arrives at your facility after normal working hours, what must be done to handle it? ✔✔held at the
interchange
The AE shipment has been accepted, checked, verified, and moved to its assigned storage location.
What must happen next? Select all that apply. ✔✔stored according to AMC drawing, records A&E into
their system
A temporary worldwide suspension of ammunition applies only to stocks belonging to the Service
initiating the suspension. ✔✔false applies to all
If an ammunition lot is suspended, an investigation is conducted to determine the condition of the
ammunition. Which of these could occur? The ammunition could be ✔✔released with restrictions,
reworked, demilitarizedWhen ammunition is in a suspended status, which of the following limitation statements could be
annotated on the DD Form 1575 or DD Form 1575-1 tag? Select all that apply. ✔✔issue movement and
use, issue prohibited, except emergency combat use
Ammunition may be suspended because of: ✔✔poor result, malfunction, failure
You are inspecting a forklift that is important for daily magazine operations. Everything seems in order,
but you notice the engine does not shut off when the operator dismounts the forklift. Does this present
a safety issue? ✔✔yes deadman switch
[Show More]