Firefighter 1 & 2 State Test Questions
and Answers Latest 2022 Already
Passed
What is the mission of the fire service? Correct Answer-To save lives and protect property
What NFPA standard establishes basic training c
...
Firefighter 1 & 2 State Test Questions
and Answers Latest 2022 Already
Passed
What is the mission of the fire service? Correct Answer-To save lives and protect property
What NFPA standard establishes basic training criteria for Firefighter I and Firefighter II Correct Answer1001
A ____ is a collection of rules enacted by law in a particular jurisdiction. Correct Answer-Code
Which of the following BEST describes the action first taken after an alert to the station? Correct AnswerDispatching of emergency services responders
What task may a telecommunications center be assigned during a progress report? Correct AnswerPeriodic time transmissions
Which of the following must be considered when deciding the size of a collapse zone? Correct AnswerType of building construction and safest location for personel
Which of the following best describes when SARS are used? Correct Answer-Confined space rescues and
technical rescue incidents
Which of the following SCBA components warns when the system is reaching 20-25 percent of cylinder
capacity? Correct Answer-End of service time indicators
When donning SCBA, all straps on the harness assembly and facepiece should be Correct Answer-Fully
extended
Which types of SCBA are tested every five years? Correct Answer-Steel and aluminum
Which of the following types of rope is the only rope required to have a rope log? Correct Answer-Life
safety rope
Which part of the rope is used to tie a knot or hitch? Correct Answer-Working
Which type of knot can be used to secure a victim's hands or feet to drag the victim to safety? Correct
Answer-Handcuff
Once a search is complete, a firefighter should Correct Answer-Report promptly to the supervisor
What are the two objectives for a structural search? Correct Answer-Search for life; assess fire conditions
In the acronym LUNAR, the A stands for Correct Answer-Assignment
Which of the following best describes the result of running a generator for a long period of time without
a load? Correct Answer-Will overheat and damage the generator.
Which rescue tool power source is typically powered by pumps? Correct Answer-Hydraulic
What stabilizing tool uses a system of at least three wedged posts between the ground and a vehicle
resting on its side or top? Correct Answer-Buttress tension system
Hybrid vehicles that use color coded wiring use ____ to mark high voltage wiring. Correct Answer-Orange
When using a strut and buttress tension system, firefighters must ensure all parts have a safety margin
that is: Correct Answer-In excess of the weight being secured
What type of extrication method is used to stabilize a vehicle that is upside down or lying on its side?
Correct Answer-Buttress tension system
What initial action is the next priority after stabilizing the scene? Correct Answer-Stabilize the victim
What type of structural collapse occurs when the floor and/or roof assemblies on both sides of a loadbearing wall collapse, allowing a good chance of victim survival? Correct Answer-A-frame
In the OATH method of signaling on a search line, two tugs represents Correct Answer-Advance
Which of the following is an example of a push/pull tool? Correct Answer-Pike pole
Cutting edges on axes should be inspected for: Correct Answer-Chips, cracks, or spurs
When caring for an unprotected metal surface, use a metal file to: Correct Answer-Remove burrs from a
cutting edge
NFPA 1931 requires that single, roof combination and extension ladders must support a maximum load
of Correct Answer-750 lbs
Ground ladders should be service tested before being placed in service, ____ while in service, and after
use that exposes the ladder to high heat or rough treatment. Correct Answer-Once each year
Which of the following describes the best placement of a ladder to be used for entry or rescue from a
window? Correct Answer-Ladder tip slightly below sill, or wedged under sill lip
Which of the following is a reason that modern construction may tend to contain fires for longer periods
of time? Correct Answer-Energy efficient designs
What should a firefighter do before stepping off a ladder, parapet wall, or other place of safety onto the
roof of a burning building, especially if the roof surface is obscured by smoke or darkness? Correct AnswerSound the roof for structural integrity by striking with an axe.
What type of hose is designed for drafting water from static water supplies or connecting to a fire hydrant?
Correct Answer-Hard suction hose
What type of fire hose damage can weaken the jacket which can lead to ruptures under pressure? Correct
Answer-Organic damage
Which of the following equipment is necessary for service testing? Correct Answer-Nozzles with shutoff
valves
The test site for service testing should be: Correct Answer-On a slight grade
Which of the following procedures should be followed when service testing fire hose? Correct AnswerStand away from the discharge valve connection when charging hose
Which action of fire fighting foam creates a barrier between the fuel and the fire? Correct AnswerSeparating
Foam lowers surface tension of water, allowing it to ____ fires in class A materials Correct AnswerPenetrate
Class A foam extinguishes and/or prevents ignition by Correct Answer-Allowing water to penetrate fuels
When applied to solid fuels, Class A foam blankets the fuel, controls flames, then Correct Answer-Breaks
down, releasing water to cool the fuel
Class B foams are especially effective on Correct Answer-Hydrocarbon fuels and polar solvents
The degree of foam expansion depends on the type of foam concentrate, accurate proportioning, quality
of the foam concentrate and Correct Answer-Method of aeration
Which of the following statements about Class A foam concentrates is most accurate? Correct AnswerClass A foam reduces the surface tension of water, allowing better water penetration into the fuel.
Flammable liquids that mix readily with water are Correct Answer-Polar solvents
Which foams are required to extinguish fire of ethanol or ethanol-based fuels? Correct Answer-Alcohol
resistant foams
Which of the following statements about foam proportioning is MOST accurate? Correct Answer-Mixing
Class A foam at a higher recommended percentage results in a thick, dry foam.
[Show More]