Telecommunication and Information Technology > QUESTIONS & ANSWERS > USI Module 12 Questions and Answers Already Passed (All)

USI Module 12 Questions and Answers Already Passed

Document Content and Description Below

USI Module 12 What does the term "sense and avoid" used in the UAS industry mean? - ✔✔Describes the UAS' ability to self-separate from other aircraft While commands are sent from the remote pilot, what is sent from the aerial vehicle? - ✔✔Data An example of contingency planning is a ______________________ - ✔✔lost communications flight plan What term explains the aspect of someone being in the Ground Control Station (GCS) and controlling the UAV? - ✔✔Human in the loop Receiving information critical to the operation of an aircraft is a function of _______________ - ✔✔Display design The term used when a person is involved in the overall action, but is removed from the control loop, allowing autonomous systems to function with infrequent or no human intervention, is ____________________ - ✔✔Human on the loop The payload operator and remote pilot in control (RPIC) work together to get the best imagery (True or False) - ✔✔True During UAS flight operations, who should communicate externally with guests, FAA, first responders, the customer, and/or the company while the aircraft is airborne? - ✔✔Any member of the UAS crew, besides the remote pilot in command (RPIC) In the event of lost communications, an orbit is when an Unmanned Aerial Vehicle (UAV) flies a circular pattern until the UAV is reacquired (also known as a loiter location) (True or False) - ✔✔True A human in the ground control station (GCS), controlling the AV is known as ________________ (answer is NOT PMTC/RPIC) - ✔✔Human in the loop A remote pilot communicates back and forth with the UAS using _____________ - ✔✔a telemetry interface Unmanned aircraft displays are based, to a certain extent, on manned aircraft displays (True or False) - ✔✔True What device provides a remote pilot data from the air vehicle to indicate a dangerous or irregular flight condition? - ✔✔Warning lights and annunciator alarms The primary responsibility of a launch and recovery crew is to fly the aircraft to a point where it can be handed off to another control element that will take it from there and fly the mission (True or False) - ✔✔True What does a display system in a ground control station provide the remote pilot? - ✔✔Situational awareness The primary function of a ground control station is to _________________ - ✔✔control the unmanned aircraft When you map an area virtually and program it into your UAS, you are ensuring that the air vehicle flies ________________ - ✔✔in a designated region As defined by the Federal Aviation Administration, what does the ground control station control? - ✔✔The flight path Geo-fencing is mapping a geographical area so you, the remote pilot, can fly the UAS with proper clearances and safety protocols in place (True or False) - ✔✔True Semi-autonomous flight of a UAS, where the AV is flown on autopilot, is called _____________________ - ✔✔Human out of the loop As a remote pilot planning an upcoming flight you use METARS for imagery-centric maps to conduct a terrain analysis (True or False) - ✔✔False What is a geographic location programmed is sequence for a route of flight? - ✔✔A waypoint During pre-flight preparations, you must anticipate the event of a lost link due to radio frequency communications failure. To be ready, you can program the communication to automatically switch to _____________________________ - ✔✔Satellite communication A manned flight deck and a UAS remote pilot display does not have which of the following? - ✔✔Signal strength

[Show More]

Last updated: 3 years ago

Preview 1 out of 3 pages

Buy Now

Instant download