Mechanic Exam Questions and Answers
Rated A
E=__ ✔✔IR
P=__ ✔✔IE
Pie r^2 = ✔✔Area of a circle
231 in^3 /____ ✔✔gal.
25.4mm/__ ✔✔in.
2.2kg/ ✔✔lb
3 phase rectifier output = ✔✔1.33 x input
single phase output = ✔✔0.
...
Mechanic Exam Questions and Answers
Rated A
E=__ ✔✔IR
P=__ ✔✔IE
Pie r^2 = ✔✔Area of a circle
231 in^3 /____ ✔✔gal.
25.4mm/__ ✔✔in.
2.2kg/ ✔✔lb
3 phase rectifier output = ✔✔1.33 x input
single phase output = ✔✔0.9 x input
RMS (effective voltage) = ✔✔0.707 (PEAK V)
TC = ✔✔R x C (5)???
RPM = ✔✔60 (frequency) / (poles/2)
door overlap minimum = ✔✔5/8" min
door gaps maximum = ✔✔3/8" max
Gibs minimum = ✔✔1/4" min
Gate Switch maximum = ✔✔2"
Passenger Sill to Sill ____ to ______" ✔✔1/2 to 1-1/2"
Platform Lift Sill ____ to _____" ✔✔3/8" to 3/4"
Moving Walk maximum = ✔✔12 degree max
Governors (Car Trip Speed =______ & Overspeed Switch =______) ✔✔Car trip speed 15-20%
greater than contract speed.
Overspeed Switch less than or equal to 90-95% of trip speed
CWT (____%) ✔✔Up to 10% greater than car trip speed
1) A contractor wants to raise the car speed from 100FPM to 125FPM. It currently has a 12"
sheave. What size sheave is required? ✔✔15"
----Diam = 12, 12"/4=3, 25FPM=3in : 100FPM + 25FPM = 12"+3" =15"
2) An MOV (metal oxide varistor) burns out. You should replace it, but cannot read the Voltage
or resistance. What should you do? ✔✔Replace it with a larger MOV. (630)
3) On a Ward-Leonard circuit, the brake is set, but the motor is trying to slip through the break.
What circuit is the issue? ✔✔Suicide Circuit. (425)
4) You have an old DC motor and you are adding an SCR Drive. What do you do with the
interpoles? ✔✔Leave the interpoles alone. (425).
NOTE: When adding the SCR Drive to the generator, the series loop is removed, as are the 3
resistors. Everything else stays the same.
5) A hydro runs up with no load, but does not run up with a full load. What is the issue? ✔✔The
relief valve is set too low. (805).
6) Runby for a 1:1 car hits the CWT buffer 4" below the top landing. The CWT runby should be
set at 18". How much should the ropes be shortened? ✔✔22" and for a 2:1 with the same issue --
> 44"
7) You need to work on a freight door retiring cam. You L
[Show More]