ADC Exam 2 Questions and answers,
100% Accurate, graded A+
Better quality microphones do not have any off-axis coloration: - ✔✔-false
Mics that can be placed on walls and floors - ✔✔-boundary mics
The holes in the s
...
ADC Exam 2 Questions and answers,
100% Accurate, graded A+
Better quality microphones do not have any off-axis coloration: - ✔✔-false
Mics that can be placed on walls and floors - ✔✔-boundary mics
The holes in the sides of a directional microphone are a critical part of it's design: - ✔✔-true
Shotgun mics sound better than cardioids indoors: - ✔✔-false
How much electronic noise the preamp contributes to a directional mic: - ✔✔-reach
all microphones are wide angle: - ✔✔-true
at normal operating distances, you need to worry about the proximity effect when using directional
mics: - ✔✔-false
a hard windscreen - ✔✔-zeppelin
dialog for film is often recorded with stereo mics: - ✔✔-false
dynamic mics are not as sensitive as condenser mics, particularly at high frequencies - ✔✔-true
48 volts of power supplied over the audio cable - ✔✔-phantom power
If you don't have sound dampening material, you can stack hard objects to deflect the sound away: -
✔✔-true
A wired connection will always sound better than a wireless one for the same microphone: - ✔✔-true
unless the _____ can reach out and touch the mic comfortably, it's too far away. - ✔✔-talent
If you don't know how the show will be edited and can't confirm instructions with a postproduction
supervisor, the best strategy is to supply how many tracks? - ✔✔-one
Multitrack recorders are now common on professional productions, keeping a separate track for each
microphone, usually called isos for __________ mic. - ✔✔-isolated
Sound mixer who aren't too busy worrying about multiple mics may be able to double on boom. - ✔✔-
true
the point of operating and moving the boom is having the mic in position________ the actor begins a
line. - ✔✔-before
Holding the boom and booming from underneath the talent provides the most natural sound for
dramatic dialog because you don't get the reverb off the floor. - ✔✔-false
Sound perspective must be subtle. Once we're aware of changes in the reverb, they become distracting.
- ✔✔-true
Almost all lavs are designed as cardioid (unidirectional). - ✔✔-false
All other things being equal, a lav is usually electrically noisier than a shotgun. - ✔✔-true
Don't let the name confuse you. A wireless mic is actually two different systems: - ✔✔-radio link/
microphone
Most analog wireless rigs also use ________ a system that uses a volume compressor on the
transmitter, precisely matched to an expander at the receiver. - ✔✔-companding
Most wireless transmitters have a volume adjustment that needs to be calibrated before the talent
walks onto the set. Cranking up the transmitter won't make things any louder, it's just going to add
more______. - ✔✔-distortion
If you're going to use wireless, you should always have a backup wired connection, whether it's another
mic or an adapter to use the wireless rig's mic with a standard cable. - ✔✔-true
When using a balancing adapter like the BeachTek undercamera 2-channel mixer/preamp (or any kind of
additional mixer/preamp, for that matter), you should always monitor the audio signal with your
headphones connected to the MIXER, not the CAMERA. - ✔✔-false
When running audio cables, if a mic cable and a power cable need to cross, it is best to do so - ✔✔-at a
90 degree angle
When using a ribbon mic or a dynamic mic, it's best to plug them directly into the camera instead of
using a preamp because of the the powerful signal generated by those pickup elements. - ✔✔-false
The higher the S/N (signal-to-noise ratio), the cleaner the track. - ✔✔-true
When feeding a mic directly into a camera (or a feed from a mixer), the input levels on the camera
probably operate best at 50% volume - ✔✔-true
You should turn ALC (Automatic Level Control, also called AGC-Automatic Gain Control-on some
cameras) OFF when shooting anything important - ✔✔-true
If you don't have a slate with clap sticks, you can substitute writing the visual information on a piece of
paper (if needed) and using your hands to clap on-camera and close to the mic to create your own sync
point. - ✔✔-true
When using a mixer with EQ, you should always adjust your frequency gains while you shoot in the field
to save time in post. - ✔✔-false
If your camera has the option, you should feed it from the mixer with a _____________________ level
signal. - ✔✔-line
When feeding the camera from a mixer and using an attenuator (or a pad), it should ideally be placed at
the ______________________________. - ✔✔-camera
"A voice-over exists in ___________________________. There should be no sense of a physical space
between the narrator and the viewer. Any reverberation can destroy that illusion of intimacy. An ADR
session has to be free from echoes, because you'll be adding a totally different reverb to match the
original location." - ✔✔-limbo
[Show More]