IICRC - AMRT Exam, Top Questions and
answers, 100% Accurate, graded A+
S500 (Water) // S520 (Mold) // NY City Guidelines - ✔✔-In general, which remediation
guidelines/standards should a remediator be familiar with?
...
IICRC - AMRT Exam, Top Questions and
answers, 100% Accurate, graded A+
S500 (Water) // S520 (Mold) // NY City Guidelines - ✔✔-In general, which remediation
guidelines/standards should a remediator be familiar with?
S520 Standard for Professional Mold Remediation - ✔✔-The industry standard of care document for
mold remediation contractors is...?
Condition 1 // Normal or uncontaminated building or items // Indoor environment that may have
settled spores, fungal fragments whose identity; location and quantity are reflective of a normal fungal
ecology for a similar indoor environment // no treatment necessary - ✔✔-What does "normal fungal
ecology" mean?
Indoor environment which is primarily contaminated with settled spores that were dispersed directly or
indirectly from a condition 3 area // Spores landed on indoor surfaces or are suspended in the air but
are not actively growing // HEPA vacuuming or damp wiping - ✔✔-Describe a Condition 2
Indoor environment contaminated with the presence of actual mold growth and associated spores //
Actual growth includes growth that is active or dormant, visible or hidden - ✔✔-Describe a Condition 3
Yes - ✔✔-Do you find settled spores in indoor environments with no complaints?
CONDITION 2 (SETTLED SPORES HAVE AN UNUSUAL DISTRIBUTION) - ✔✔-What are "settled spores"
according to the S520?
Should - ✔✔-The Trigger language term that defines the "standard of care" in the S500 and S520 is...?
Shall - ✔✔-The Trigger language term that defines mandatory or regulatory requirements (S500 & S520)
is?
recommended - ✔✔-The trigger language term that defines advised or suggested (S500 & S520) is...?
Complexities - ✔✔-How are situations referred to in the S500 and S520 that make a project more
difficult or detailed, but the project can still be performed?
Complications - ✔✔-How are situations referred to in the S500 and S520 that make a project more
intricate or complex after the start, but the project can still be performed with a change in scope?
Limitations - ✔✔-How are situations referred to in the S500 and S520 that limit the scope and
remediation activities?
No - ✔✔-Are there federal mold remediation regulations in the US or Canada?
Workers health, other occupants, unaffected area, HVAC system - ✔✔-What are we trying to protect in
a microbial remediation project?
Identify and eliminate the water source - ✔✔-What should be the first step in a microbial remediation
project?
Ability of people to reocc - ✔✔-What is the ultimate cleaning criterion (according to the ACGIH
Bioaerosols)
Methods and procedures that we implement to protect the worker & occupants & HVAC system - ✔✔-
What does engineering control mean?
Isolation with Containment, Airflow Management, HEPA filtration and controlled demolition methods -
✔✔-Name Engineering Controls
PPE - ✔✔-What is not an engineering control?
One millionth of a meter - ✔✔-What is the definition of a micron?
DIGITAL MONOMETER - ✔✔-How can evaluate and test an air flow and a pressure differential?
High Efficiency Particulate Air - ✔✔-What does the acronym HEPA stand for?
removes 99.97% of particulate matter of 0.3 microns and larger - ✔✔-WHAT IS THE DEFINITION OF
HEPA FILTRATION?
Isolation of work area, managing air flow and controlled demolition - ✔✔-What are the three main
principles used for protecting people and unaffected environments?
Preloss conditions // safe & sanitary // Condition 1 - normal fungal ecology - ✔✔-What are the goals in a
microbial remediation project for the remediator and IEP (Indoor Environmental Professional)?
Water source - ✔✔-What factors are necessary for mold growth to occur?
Keep building dry and when wet, dry immediately and expediently - ✔✔-What is the best way to
prevent mold growth in a building?
Wet building materials - ✔✔-What can create odors in wet buildings?
When air is supplied to a space than taken out - ✔✔-Define positive pressure in a space?
When air is taken out of the space - ✔✔-Define negative pressure in a space?
Enclosure in a work area that is contained with poly - ✔✔-What is a local containment?
Effectiveness of our hepa filters - ✔✔-What can laser particle counters be used for?
High to low - ✔✔-Airflow always move from a ____ to a ___ pressure?
TRUE - ✔✔-Particles that are smaller than 5 microns can be inhaled deeply into the lungs. True or False
Organism is water loving - ✔✔-What does the term hydrophilic mean?
Organism avoids water - ✔✔-What'd does hydrophobic mean?
Cat 1 - clean - low infection risk / Cat 2 - gray - medium infection risk / Cat 3 - black - large infection risk -
✔✔-Name the Categories of Water according to the S500
All 3 categories - ✔✔-With which Category of Water can microbial growth occur?
Toilet Bowl = 2 // Surface Water from Raising Rivers = 3 // Hydrostatic seepage = 2 // Aquarium =2 //
Water beyond the trap=3 // Broken toilet tank=1 // Sea Water=3 // Dishwasher and laundry & washing
machine=2// Water in toilet bowl=1 - ✔✔-What categories of water (S500) do these sources fall under?
Toilet Bowl? Surface Water from Raising Rivers? Hydrostatic seepage? Aquarium? Water beyond the
trap? Broken toilet tank? Sea Water? Dishwasher and laundry/washing machine? Water in toilet bowl?
Above 17% - ✔✔-What % of moisture content (meter reading) is necessary for mold growth to occur on
wood?
Above 20% - ✔✔-Wood rot can occur at which percent of moisture content?
the amount of free water available on the boundary layer of a substrate (surface) for microbial
amplication - ✔✔-What is the definition of water activity (aw)?
Equilibrium Relative Humidity (ERH) - ✔✔-What moisture measurement is comparable to water activity
(aw)?
identification / correction of moisture problem // isolation of work area and HVAC registers // air flow
management (negative air) // demolition and removal of porous materials // cleaning of remaining
materials // deep cleaning of all surfaces in work area // post remediation "clearance" testing //
reconstruction - ✔✔-What is the sequence (order) of procedures in a microbial remediation project?
4-6 mil with medium slip factor, and has to be at 25 or better flame retardant - ✔✔-What type of
polyethylene sheeting should be used for containments?
Things that exist before we entered the building (for example, broken ceiling tile has nothing to do with
water damage) - ✔✔-What are pre-existing conditions?
source containment are used for small or minimal areas of microbial growth // goes directly to the
source // can be used in local or full containment // placing poly or carpet tack mat over moldly material
prior to removal OR placing a ceiling tile in a plastic bag // HEPA vacuuming or damp wiping of the work
area as needed // this is used if you have checked on the other side and nothing else is done... this is it...
- ✔✔-Name Source Containment Methods
Goes up and creates condition 2 - ✔✔-What happens to the spore counts during demolition?
Medium slip - ✔✔-What is the best slip factor for poly?
Cover it up - ✔✔-What do we do with HVAC system and vents?
recommended minimum pressure differential of -0.02 inch of water gauge (w.g.) OR -5 Pascal (Pa) - ✔✔-
What is the best slip factor for poly?
negative - ✔✔-Work areas are _____ pressurized in relationship to surrounding unaffected areas.
Positive - ✔✔-CLean areas should be ________ pressurized in relationship to the affected areas.
Clean to dirty - ✔✔-During a microbial remediation, air flow should always be from a _____ area to a
_____ area.
The size and kind of the job - ✔✔-What determines the number of decon chambers in a microbial
remediation project?
Prevents cross contamination // reduces work exposures // protect unaffected area // help HVAC
system // protects occupants - ✔✔-Managed air flow has which benefits?
Air Filtration Device - ✔✔-What does AFD stand for?
Cubic Feet per Minute - ✔✔-AFDs are rated by what parameter?
Air changes per hour - ✔✔-What does ACH stand for?
288 CFM - ✔✔-Calculate what AFD size is needed to create 4 air exchanges in a room 18 x 30 x 8 foot.
5.5 ≈ 6 (round up for CFM) - ✔✔-How many AFD's (rated at 1800CFM) are needed to create 6ACH in a
150 x 60 x 11 foot structure?
37.5 ≈ 37 (round down for ACH) - ✔✔-A scrubber rated at 1000CFM is placed in a 20 x 10 x 8 foot room.
How many ACH's are created?
Seal intake with poly and tape - ✔✔-What should be done to prevent spore release from AFD's when
shutting them down, transporting and storing them?
Glue is toxic and flammable - ✔✔-Why use spray adhesion (glue) cautiously?
Create a moisture barrier // has to be big enough to work in but small enough to clean // has to be
strong enough // must drive make up through the filter // design where entry & exit are in a practical
and safe way // use signage // - ✔✔-What do we need to consider when setting up negative pressure
containments with plastic sheeting?
Abrasive methods (media lifting, blasting, sanding) - ✔✔-How do you treat moldy wood framing?
The machine stays running - ✔✔-How do we change primary and secondary AFD air filters inside the
containment?
Ducting - ✔✔-What reduces an AFD's CFM rate?
Collapses - ✔✔-What can too much pressure do to your containment?
In conspicuous area - ✔✔-Where do you place warning signs?
We have to know where the make-up air comes from - ✔✔-What is important about the make-up air of
the managed air flow?
Source - ✔✔-What type of containment is used for small areas of microbial contamination?
The utilization of the entire room or building // combination of critical barriers and negative pressure -
✔✔-Describe a full scale containment.
[Show More]