Report for Experiment #16
Electric Field and Electric Potential
Cassie Ng
Lab Partner: Xiangzhou Kong
TA: Maksim Piskunov
May 24, 2018
Abstract
In this experiment, electric potential and electric fields are studie
...
Report for Experiment #16
Electric Field and Electric Potential
Cassie Ng
Lab Partner: Xiangzhou Kong
TA: Maksim Piskunov
May 24, 2018
Abstract
In this experiment, electric potential and electric fields are studied. Investigation 1 studies the electric
potential and field between two parallel electrodes, while investigation 2 studies the potential and field
between two concentric electrodes. The electric field in investigation 1 was found to be ?? = 74.612 ±
5.264 ?
?
compared to the theoretical value of E, which was ?? = 75.625 ± 7.663 ?
?
. When studying the
relationship between the electric potential and radius in investigation 2, the data was very inconsistent,
and the theoretical vs experimental values did not agree due to several errors.
Introduction
Charges either experience attraction or repulsion, so two charges always have an effect on each other.
A charge is surrounded by an electric field, E, and the other charge interacts with the field. There is also a
potential field between charges, but the potential is a scalar quantity, rather than a vector like the electric
field. Electric field lines are used to visualize electric fields, while equipotential lines are used to visualize
a potential field. Equipotential lines, lines where the potential are equal, are perpendicular to electric field
lines. Electric field and potential are related by the following equation:
??
= −
?? − ??
?? − ??
= −
∆?
∆?
where A and B are points that are close to each other. This equation gives the x component of the total
electric field. If the potential is already known, the equation can be written as
∆? = −?⃗ ∙ ∆?
where r is the distance vector between two points that are next to each other. Integrating this equation
gives
?? − ?? = ∫???⃗ ∙ ??
which is utilized in investigation 2.
The goals of this experiment are to study the electric potential and electric field between electrodes,
and to understand the relationship between electric potential and electric field. Investigation 1 studies the
electric field between two parallel electrodes while investigation 2 explores the electric field between
concentric electrodes. By measuring the distances between equipotential lines, the relation between the
electric field and potential are able to be studied.
Investigation 1
The setup consisted of 2 straight electrodes, a 10V power supply, 4 connecting wires – one with a
probe tip, - a digital multimeter, conducting paper, a soft rubber pad, and a grease pencil. The conducting
paper was placed on top of the rubber pad, and the electrodes were placed parallel to each other in the
middle of the sheet, separated 10cm. The grease pencil was used to mark the positions of the electrodes.
The electrodes were then connected to the power supply, with the negative terminal connected to the
electrode on the left and the positive terminal connected to the electrode on the right. The power supply
was set to 10V. Next, the voltmeter ground was connected to the negative electrode and the probe-tipped
wire attached to the V input of the voltmeter.
After setting up the apparatus, the probe-tip was used to find a place on the conducting paper where
the digital multimeter read 5V, which was expected to be in the middle of the electrodes. After finding
5V, the 2V, 3V, 4V, 6V, 7V, and 8V points were found. The equipotential lines were
[Show More]