Module 4 Exam, Part I (contains 19 questions)
Here is your test result.The dots represent the choices you have made.
The highlighted questions are the questions you have missed.
Remediation Accessed shows whether you
...
Module 4 Exam, Part I (contains 19 questions)
Here is your test result.The dots represent the choices you have made.
The highlighted questions are the questions you have missed.
Remediation Accessed shows whether you accessed those links.'N' represents links not visited and 'Y'
represents visited links.
1.) A Government official who obligates the Government on a contract without having
sufficient funds to cover that expense has violated the _______________.
Reprogramming Thresholds
Misappropriation Act
Anti-Deficiency Act
Bona Fide Need Rule
2.) The Army can transfer excess funds from a Procurement appropriation to a Research,
Development, Test, and Evaluation (RDT&E) appropriation to cover a funding shortfall
of $3 million without prior approval of Congress.
True
False
3.) Match each System Product Lifecycle element to the appropriate software
configuration management baseline.
System Functional
Baseline
System Product Baseline
System Allocated
Baseline
4.) The approved detail design resulting from the __________ serves as a basis for making
the decision to begin production.
Preliminary Design Review
System Requirements Analysis; Softw are Requirements Analysis
Softw are Coding
Softw are Design; Interface Design; Database Design
Systems Requirement Review
Test Readiness Review
Critical Design Review
5.) The management of internal interface design would usually be the responsibility of the
_____________?
Government Program Manager
Independent Test and Evaluation Agency
Joint Interoperability Test Command
Contractor
6.) Which of the following configuration baselines is used to define the overall system level
capabilities of a system?
Product Baseline
Functional Baseline
Allocated Baseline
Item Baseline
7.) One of the many potential issues associated with the configuration management of
commercial items, is the ongoing requirement to track:
The contractor and sub-contractor workforce skill sets
The development of technical performance measures
The corrective actions applied to developmental test failures
The numerous product releases over the life cycle of the program
8.) A new joint command and control system is being
developed to meet the strategic information needs
of all the military services. The Air Force is the lead
service, but the Army and Navy have different
points of view about what functions the system
should perform. Which one of the software
acquisition best practices would be most relevant in
managing this issue as the program office
undertakes system development?
[27c. Identify
developer
practices
essential for
creation of
high quality
software.]
[Remediation
Accessed: Y]
Manage and trace requirements
Ensure data and database interoperability
Track defects against quality targets
Manage testing as a continuous process
9.) Using pre-production systems, an Operational Assessment can reduce program risk by
_____________________.
Tracking the development of the critical operational issues
Providing operational effectiveness and suitability data
Supporting the decision to begin full rate production (FRP)
Looking at suitability issues during developmental test and evaluation
10.) A program manager should normally look for opportunities to integrate
developmental testing (DT) and operational testing (OT) in order to save time and
money.
True
False
11.) Within _____ days after a program
deviation occurs, the Program Manager
[4b. Identify when
program deviations
[Remediation
Accessed: N]
must inform the Milestone Decision
Authority of the action(s) necessary to
get the program back on track.
occur and the actions
that should be taken
by the acquisition
manager.]
90
120
30
60
12.) A program deviation (informally known as a
breach) from the Acquisition Program
Baseline (APB) occurs when the Program
Manager (PM) has reason to believe that the
current estimate of a performance, schedule,
or cost parameter is not within the threshold
value for that parameter. When a deviation
occurs, the PM will notify the Milestone
Decision Authority (MDA) ________________
that a program deviation has occurred.
[Relate the
Acquisition
Program Baseline
(APB) to planning,
control, and risk
management in
attaining cost,
schedule and
performance
goals.]
[Remediation
Accessed:
Y]
Within 90 days
Within 60 days
Immediately
Within 30 days
13.) Instability of user capability needs, design, and production processes are most likely
to cause _________________.
Cost increases and schedule slips
Cost decreases without impacting schedule
Cost decreases and schedule slips
Schedule slips without impacting cost
14.) A configuration management program should focus on ensuring designs are traceable
to capability needs, developmental changes are controlled and documented, interfaces
are well-defined and understood, and _______________________________.
All product documentation is consistent with its supporting information
All Integrated Program Management Report formats are complete
Integrated logistics product support elements are identified and tracked
Enterprise Resource Planning (ERP) activities are controlled
15.) Which technical review is held during
the Technology Maturation and Risk
Reduction phase to ascertain progress
in defining system technical
requirements?
[Trace the maturation of
system design
information as it
evolves through the
acquisition life cycle of
a system.]
[Remediation
Accessed: Y]
Critical Design Review (CDR)
System Functional Review (SFR)
Preliminary Design Review (PDR)
System Requirements Review (SRR)
16.) The focus of the ___________________ program is to ensure that designs are
traceable to capability needs; to control and document all developmental changes; to
ensure that all interfaces are well defined and understood by all parties, particularly
where multiple engineering teams or vendors are involved; and to ensure that all
product documentation is consistent with its supporting information.
Lean Manufacturing
Configuration Management
Earned Value Management
Enterprise Resource Management
17.) Correct identification of the underlying root cause is the desired outcome of the
________________ approach to problem solving.
Regression analysis
Cause-oriented
Historical
Symptom-oriented
18.) When filling in the cause-and-effect (Fishbone) diagram, the _____________ are
identified and entered as the fish bones and the __________ is(are) entered as the fish
head.
Effects, causes
Root causes, solutions
Causes, problem statement
Causes, symptoms
19.) The primary system interoperability issue is the complete, accurate, and timely
transfer of information from one system to another. In order to validate the
interoperability of systems, extensive testing is required.
True
False
Module 4 Exam, Part I (contains 4 questions)
• Here is your test result.The dots represent the choices you have made.
• The highlighted questions are the questions you have missed.
• Remediation Accessed shows whether you accessed those links.'N' represents links not
visited and 'Y' represents visited links.
1.) A new capability need has surfaced to modify
an existing U.S. command and control system
so that it can exchange information with a
system operated by a European ally. Which of
the following software best practices must be
followed in order to successfully make this
modification?
[27c. Identify
developer
practices essential
for creation of
high quality
software.]
[Remediation
Accessed: N]
Use metrics to manage
Define and control interfaces
Use system based software design
Assess reuse risks and costs
2.) When a program deviation occurs, the Program Manager should notify the
Milestone Decision Authority within 90 days of the occurrence.
True
False
3.) An Acquisition Program Baseline (APB) is used to document the cost,
schedule, and performance thresholds and objectives of a program beginning at
program initiation. The APB is a formal agreement signed by the
____________ /___________.
Financial Manager / Cost Analyst
Product Quality Manager / Lead System Integrator
Systems Engineer / Test Engineer
Program Manager / Milestone Decision Authority
4.) Which technical review is required for a
successful Milestone B prior to the
Engineering and Manufacturing
Development Phase and occurs when all
major design issues have been resolved in
the system preliminary design and work can
begin on detailed design?
[Trace the maturation
of system design
information as it
evolves through the
acquisition life cycle of
a system.]
[Remediation
Accessed: N]
Critical Design Review (CDR)
Preliminary Design Review (PDR)
System Requirements Review (SRR)
Test Readiness Review (TRR)
Module 4 Exam, Part I (contains 2 questions)
• Here is your test result.The dots represent the choices you have made.
• The highlighted questions are the questions you have missed.
• Remediation Accessed shows whether you accessed those links.'N' represents links not
visited and 'Y' represents visited links.
1.) The Program Manager just received approval of his proposed acquisition
strategy with one exception: he has been directed to make maximum use of
existing Air Force software. Which of the best software acquisition practices is
most applicable to his situation?
Inspect requirements and design
Use metrics to manage
Assess reuse risks and cost
Use system based software design
2.) Which technical review is held during the Engineering and Manufacturing
Development Phase to assess the final design after the build to baseline has
been achieved?
System Requirements Review (SRR)
Test Readiness Review (TRR)
Preliminary Design Review (PDR)
Critical Design Review (CDR)
1) Your Program received Procurement Funding for 10 tanks; you bought 9 tanks and built
a maintenance facility. Now you've been brought up on charges for violating the
______________. [12b. Select the appropriate public law (i.e., Misappropriation Act,
Anti-Deficiency Act, Bona Fide Need) that applies to the use of appropriated funds
under specific circumstances.]
Misappropriation
Act
Anti-Deficiency
Act
Bona Fide Need
Rule
Expired Accounts
Rule
2) The Navy can transfer $11 million Research, Development, Test, and Evaluation
(RDT&E) funds from one program element to another without prior approval of
Congress. [12d. Given a funding shortfall, apply the rules governing
reprogramming of appropriated funds in each appropriation category to resolve
the problem.] [Remediation Accessed :N]
True
Fals
e
3) Select the best statement about the use of Technical Reviews in the current
acquisition environment. [23a. Relate the different types of program unique
specifications to their appropriate configuration baselines and technical review
requirements.]
Technical Reviews should be tailored to assess development maturity and risk and
to determine readiness to proceed to the next phase.
Technical Reviews waste valuable Government and contractor time and should be
eliminated to allow more focus on program execution.
The same standard set of Technical Reviews should always be conducted on every
program to ensure the PM has complete data to support decisions.
Technical Reviews are essential since they are vehicles for program problem
solving and training new people on the details of the program.
4) The approved detail design resulting from the __________ serves as a basis for
making the decision to begin production. [24e. Identify the purpose of specific
technical reviews and their relationship to the acquisition process.]
Critical Design
Review
Preliminary Design
Review
Systems Requirement
Review
Test Readiness
Review
5) The management of internal interface design would usually be the responsibility of
the _____________? [25a. Identify the roles, responsibilities, and methods for
interface control and technical data management.]
Contract
or
Government Program
Manager
Joint Interoperability Test
Command
Independent Test and Evaluation
Agency
6) Which of the following configuration baselines provides the details from which a
contractor can transition from design to production of a system? [25c. Identify the
relationship between configuration baselines, specifications, and configuration
management planning.] [Remediation Accessed :N]
Product
Baseline
Functional
Baseline
Allocated
Baseline
Configuration Management
Baseline
7) What are some of the planning challenges that must be considered when taking
commercial items and modifying them for military use (Select all that apply)? [25d.
Identify the impact on configuration management when commercial items are
used in the system.]
Long-term logistics
support
Maintain technical
data
Integratio
n
Availability of test ranges and
personnel
Management of government furnished
equipment
8) A new capability need has surfaced to modify an existing U.S. command and control
system so that it can exchange information with a system operated by a European
ally. Which of the following software best practices must be followed in order to
successfully make this modification? [27c. Identify developer practices essential
for creation of high quality software.] [Remediation Accessed :N]
Define and control
interfaces
Use metrics to
manage
Use system based software
design
Assess reuse risks and
costs
9) An Early Operational Assessment is typically conducted to _____________________.
[31b. Identify the role of Early Operational Assessment (EOA) and Operational
Assessment (OA) in reducing program risk.]
Identify potential operational effectiveness and suitability issues during system
development
Support the decision to begin low rate initial
production (LRIP)
Meet the requirement to conduct initial operational test and
evaluation (IOT&E)
Track the evolution of critical technical parameters against the
system design
10) In the interest of independent reporting, Developmental Test and Evaluation (DT&E)
and Operational Test and Evaluation (OT&E) activities may NOT be integrated.
[32g. Identify the risks and benefits associated with integrated Developmental
Testing/Operational Testing (DT/OT).]
True
Fals
e
11) Within _____ days after a program deviation occurs, the Program Manager must
inform the Milestone Decision Authority of the action(s) necessary to get the
program back on track. [4b. Identify when program deviations occur and the
actions that should be taken by the Program Manager.]
30
90
12
0
60
12) An Acquisition Program Baseline (APB) is used to document the cost, schedule, and
performance thresholds and objectives of a program beginning at program initiation.
The APB is a formal agreement signed by the ____________ /___________. [Relate the
Acquisition Program Baseline (APB) to planning, control, and risk management
in attaining cost, schedule and performance goals.]
Program Manager / Milestone Decision
Authority
Product Quality Manager / Lead System
Integrator
Systems Engineer / Test
Engineer
Financial Manager / Cost
Analyst
13) Program cost increases and schedules slips are most likely caused by
__________________, changes to the design, and changes to the production processes.
[Identify how instability of user capability needs, design, and production
processes impact program cost and schedule.]
Changes to user capability
needs
Changes to the number of systems
ordered
Robust and accurate configuration
management
Well-defined and documented technical data
packages
14) As part of the overall systems engineering effort, both the Government and the
Contractor conduct configuration management activities, and either can take the
lead for a particular configuration item. The contractor is usually responsible for
design and control of ___________________, while the Government is responsible for
_______________. [Recognize how configuration management impacts all
functional disciplines (e.g., test, logistics, manufacturing, etc.).]
Internal interfaces / external
interfaces
Supportability changes / sustainability
changes
Technical measures / technical performance
measures
Integrated products /integrated
processes
15) Which technical review is held during the Engineering and Manufacturing
Development Phase to assess the final design after the “build to” baseline has been
achieved? [Trace the maturation of system design information as it evolves
through the acquisition life cycle of a system.]
Critical Design Review
(CDR)
Preliminary Design Review
(PDR)
System Requirements Review
(SRR)
Test Readiness Review
(TRR)
16) Changes are typical in acquisition programs; therefore, it is important to develop a
sound configuration management strategy, place the Government in control of each
element of the baselines, and design enough flexibility into the system to handle
enhancements. [Identify key acquisition best practices, including commercial
practices that impact the relationship between Government and industry.]
[Remediation Accessed :N]
Fals
e
True
17) When using a cause-oriented approach to resolve acquisition problems, it is
important to ____________________. [Apply a generic problem-solving model to an
acquisition situation.]
Identify all possible
causes
Place blame on the responsible
person/people
Analyze symptoms
only
Focus exclusively on problem
history
18) When using the cause-and-effect (Fishbone) diagram to resolve an acquisition
problem, after you draw the fishbone diagram, the next step is to
____________________. [Apply one or more selected qualitative tools (e.g., fishbone
diagram) to resolve a problem.] [Remediation Accessed :N]
Define the
problem
Identify the root
cause
Identify major cause
categories
Identify possible causes and contributing
factors
19) The Joint Interoperability Test Command (JITC) addresses the interoperability
mission via two types of certification testing: ___________________ and
_______________________. [Identify the requirements for interoperability testing.]
Standards conformance testing / interoperability
testing
Unit integration testing / final qualification
testing
Software interoperability testing / hardware
interoperability testing
Preliminary interoperability testing / critical
interoperability testing
Module 4 Exam, Part I
• Here is your test result.The dots represent the choices you have made.
• The highlighted questions are the questions you have missed.
• Remediation Accessed shows whether you accessed those links.'N' represents links
not visited and 'Y' represents visited links.
Back to Status page
contains 19 Questions
1) Your Program received Procurement Funding for 10 tanks; you bought 9
tanks and built a maintenance facility. Now you've been brought up on
charges for violating the ______________. [12b. Select the appropriate public
law (i.e., Misappropriation Act, Anti-Deficiency Act, Bona Fide Need) that
applies to the use of appropriated funds under specific circumstances.]
Misappropriation
Act
Anti-Deficiency
Act
Bona Fide Need
Rule
Expired Accounts
Rule
2) The Navy can transfer $11 million Research, Development, Test, and
Evaluation (RDT&E) funds from one program element to another without
prior approval of Congress. [12d. Given a funding shortfall, apply the rules
governing reprogramming of appropriated funds in each appropriation category
to resolve the problem.]
Fals
e
True
3) Select the best statement about the use of Technical Reviews in the
current acquisition environment. [23a. Relate the different types of program
unique specifications to their appropriate configuration baselines and technical
review requirements.]
Technical Reviews should be tailored to assess development maturity and
risk and to determine readiness to proceed to the next phase.
Technical Reviews waste valuable Government and contractor time and
should be eliminated to allow more focus on program execution.
The same standard set of Technical Reviews should always be conducted
on every program to ensure the PM has complete data to support
decisions.
Technical Reviews are essential since they are vehicles for program
problem solving and training new people on the details of the program.
4) Where would the initial Functional Baseline be reviewed to ensure that it
covers all the Government's capability needs? [24e. Identify the purpose of
specific technical reviews and their relationship to the acquisition process.]
[Remediation Accessed :N]
Systems Functional
Review
Critical Design
Review
Preliminary Design
Review
Test Readiness
Review
5) Which of the following is used by the contractor to define boundaries
between the subsystems and components within a system? [25a. Identify
the roles, responsibilities, and methods for interface control and technical data
management.]
Interface
management
Configuration
audits
Design
accreditation
Synthesi
s
6) Which of the following configuration baselines provides the details from
which a contractor can transition from design to production of a system?
[25c. Identify the relationship between configuration baselines, specifications,
and configuration management planning.]
Product
Baseline
Functional
Baseline
Allocated
Baseline
Configuration Management
Baseline
7) What are some of the planning challenges that must be considered when
taking commercial items and modifying them for military use (Select all
that apply)? [25d. Identify the impact on configuration management when
commercial items are used in the system.]
Management of government furnished
equipment
Integratio
n
Availability of test ranges and
personnel
Long-term logistics
support
Maintain technical
data
8) A new joint command and control system is being developed to meet the
strategic information needs of all the military services. The Air Force is the
lead service, but the Army and Navy have different points of view about
what functions the system should perform. Which one of the software
acquisition best practices would be most relevant in managing this issue as
the program office undertakes system development? [27c. Identify
developer practices essential for creation of high quality software.]
Manage and trace
requirements
Ensure data and database
interoperability
Track defects against quality
targets
Manage testing as a continuous
process
9) An Early Operational Assessment is typically conducted to
_____________________. [31b. Identify the role of Early Operational Assessment
(EOA) and Operational Assessment (OA) in reducing program risk.]
Identify potential operational effectiveness and suitability issues during
system development
Support the decision to begin low rate initial production
(LRIP)
Meet the requirement to conduct initial operational test and
evaluation (IOT&E)
Track the evolution of critical technical parameters against the
system design
10) A program manager should normally look for opportunities to integrate
developmental testing (DT) and operational testing (OT) in order to save
time and money. [32g. Identify the risks and benefits associated with
integrated Developmental Testing/Operational Testing (DT/OT).]
Fals
e
True
11) A program deviation (informally known as a “breach”) from the
Acquisition Program Baseline (APB) occurs when the Program Manager
(PM) has reason to believe that the current estimate of a performance,
schedule, or cost parameter is not within the threshold value for that
parameter. When a deviation occurs, the PM will notify the Milestone
Decision Authority (MDA) ________________ that a program deviation has
occurred. [Relate the Acquisition Program Baseline (APB) to planning, control,
and risk management in attaining cost, schedule and performance goals.]
Immediatel
y
Within 30
days
Within 60
days
Within 90
days
12) Instability of user capability needs, design, and production processes are
most likely to cause _________________. [Identify how instability of user capability
needs, design, and production processes impact program cost and schedule.]
Cost increases and schedule
slips
Cost decreases and schedule
slips
Cost decreases without impacting
schedule
Schedule slips without impacting
cost
13) A configuration management program should focus on ensuring designs
are traceable to capability needs, developmental changes are controlled
and documented, interfaces are well-defined and understood, and
_______________________________. [Recognize how configuration management
impacts all functional disciplines (e.g., test, logistics, manufacturing, etc.).]
All product documentation is consistent with its supporting
information
Integrated logistics product support elements are identified and
tracked
All Integrated Program Management Report formats are
complete
Enterprise Resource Planning (ERP) activities are
controlled
14) A program deviation occurs if the PM thinks his/her program will not meet
the threshold value established for a performance parameter in the
Acquisition Program Baseline. [4b. Identify when program deviations occur
and the actions that should be taken by the Program Manager.]
Fals
e
True
15) Which technical review is held during the Engineering and Manufacturing
Development Phase to assess the final design after the “build to” baseline
has been achieved? [Trace the maturation of system design information as it
evolves through the acquisition life cycle of a system.]
Critical Design Review
(CDR)
Preliminary Design Review
(PDR)
System Requirements Review
(SRR)
Test Readiness Review
(TRR)
16) Who usually controls the “build to” or product baseline in an acquisition
program? [Identify key acquisition best practices, including commercial
practices that impact the relationship between Government and industry.]
Contracto
r
Governme
nt
Subject Matter
Expert
DoD Information Technology Standards
Registrar
17) When using a cause-oriented approach to resolve acquisition problems, it
is important to ____________________. [Apply a generic problem-solving model to
an acquisition situation.]
Identify all possible
causes
Place blame on the responsible
person/people
Analyze symptoms
only
Focus exclusively on problem
history
18) When using the cause-and-effect (Fishbone) diagram to resolve an
acquisition problem, after drawing out a blankfishbone diagram, the next
step is to ____________________. [Apply one or more selected qualitative tools
(e.g., fishbone diagram) to resolve a problem.]
Define the
problem
Identify the root
cause
Identify major cause
categories
Identify possible causes and contributing
factors
19) The Joint Interoperability Test Command (JITC) verifies ________________
through the field assessment of systems during exercises and
contingencies, and provides certificates of _____________ upon validation.
[Identify the requirements for interoperability testing.]
Interoperability performance/
interoperability
Configuration management /
compliance
Achievement of key performance parameters (KPPs) /
compliance
Reliability and maintainability /
compliance
1) The approved detail design resulting from the __________ serves as a basis for
making the decision to begin production. [24e. Identify the purpose of specific
technical reviews and their relationship to the acquisition process.]
Critical Design
Review
Preliminary Design
Review
Systems Requirement
Review
Test Readiness
Review
[Show More]