Questions and Answers > Alabama State University ACQ 202 Module 2 - Planning - Acquisition Strategy Development Part I Exam

Document Content and Description Below

Alabama State University ACQ 202 Module 2 - Planning - Acquisition Strategy Development Part I Exam Module 2 Exam, Part I · Here is your test result.The dots represent the choices you have made. ... · The highlighted questions are the questions you have missed. · Remediation Accessed shows whether you accessed those links.'N' represents links not visited and 'Y' represents visited links. Back to Status page contains 18 Questions 1) As part of the DoD-recommended Test and Evaluation Master Plan (TEMP) format, which of the following documents is considered to be one of the four parts of the TEMP that serve as a starting point for organizing a successful T&E program? [21a. Recognize how the Test and Evaluation Master Plan (TEMP) generation, staffing and approval process integrates all functional disciplines throughout the acquisition life cycle.] Test and Evaluation Strategy Acquisition Strategy Integrated Master Plan Logistics Funding Resource Summary 2) Which one of the following organizations would conduct testing on the flight controls of a fighter aircraft to ensure it will meet the critical technical parameters (CTPs) derived from the Capability Development Document (CDD)? [29b. Identify the key T&E support organizations within DoD.] Air Force Materiel Command (AFMC) Air Force Operational Test and Evaluation Center (AFOTEC) Defense Contract Management Agency (DCMA) Joint Interoperability Test Command (JITC) 3) Which one of the following test and evaluation (T&E) products is required at Milestone B? [29c (2). Identify the primary Test and Evaluation (T&E) products required at each acquisition milestone.] [Remediation Accessed :N] Identification of LRIP Quantities Operational Assessment No T&E products are required at MS B Waiver of Military Equipment Program Description 4) Operational Measures of Effectiveness (MOE) and Measures of Suitability (MOS) are formally documented in the ________. [29c. Identify the primary Test and Evaluation (T&E) products required at each acquisition milestone.] [Remediation Accessed :N] Test and Evaluation Master Plan (TEMP) Acquisition Strategy Initial Capabilities Document (ICD) Work Breakdown Structure (WBS) 5) The final approval authority for system-related National Environmental Policy Act (NEPA) documentation is the: [3a (2). Identify the information required for a milestone review regarding environmental, safety, and occupational health issues.] [Remediation Accessed :N] Component Acquisition Executive (CAE) Program Manager (PM) Environmental coordinator Under Secretary of Defense (Environmental Security) 6) How does a program management office show the sequence and interrelationship of all the business and technical activities required to accomplish the acquisition? [3a(3). Identify the information required for a decision review and recognize the significance of the Acquisition Program Baseline (APB), Key Performance Parameters (KPPs), and Acquisition Strategy.] Acquisition Strategy - Program Structure Chart Integrated Product and Process Development (IPPD) Plan Risk Management Plan Integrated Systems Engineering/Business Management Plan 7) The National Environment Policy Act (NEPA) can affect defense acquisition program managers because: [3b. Identify key federal and DoD policies governing environmental, safety, and health issues associated with defense systems acquisition.] NEPA requires environmental impacts to be considered in the decision making process for acquisition programs. Violators of the NEPA process are subject to fines and prison sentences. NEPA requires environmental impacts to be completely eliminated before approval will be granted for an acquisition program. NEPA requires program managers to take remedial action to restore the environment before they can initiate a new acquisition program. 8) One of the primary advantages of international cooperative development includes: [3d. Identify the advantages and disadvantages of international armaments cooperative development in an acquisition strategy.] Reduced cost Foreign dependency Increased administrative requirements Improved currency exchange 9) The risk management process has five activities: [4d. Identify the five activities of the risk management process.] [Remediation Accessed :N] Planning, Identification, Analysis, Handling, and Monitoring Analyzing, Designing, Developing, Testing and Observing Controlling, Alleviating, Assuming, Transferring and Targeting Planning, Controlling, Developing, Mitigating and Monitoring 10) Identification of the possible consequences in terms of performance, schedule, and cost occurs in which step of the risk management process? [4e. Use the risk management process to identify the major areas/sources of risk in an acquisition program strategy.] Risk analysis Risk tracking Risk mitigation Risk monitoring 11) Transitioning to Integrated Product and Process Development (IPPD) will involve application of certain key tenets, such as customer focus, concurrent development, and: [5a. Relate the key tenets of Integrated Produce and Process Development (IPPD) to planning and executing an acquisition program.] Event-driven scheduling Supervisory leadership Risk avoidance Reliance on independent organizations 12) The Joint Staff has oversight for certifying interoperability capability requirements for the Army, Navy, Air Force, and Marine Corps are valid. [32d. Identify the requirements for interoperability testing.] True Fals e 13) Which of the following is recognized as a barrier to successful implementation of Integrated Product and Process Development (IPPD)? [Identify the barriers to successful Integrated Product Team (IPT) implementation.] Lack of commitment from top management Pressure to meet established scheduled milestone dates Constraints imposed by Affordability and Should Cost Limited trade space between threshold and objective parameters 14) Government contracts should be designed to allow contractors to apply Integrated Product and Process Development (IPPD) principles and make use of effective commercial standards, practices, and processes. [Identify the key acquisition best practices related to IPPD and IPT processes, including commercial practices that impact the relationship between Government and industry.] True Fals e 15) Responsibility for reviewing and analyzing the results of operational test and evaluation (OT&E) conducted for each major DoD acquisition program belongs to? [Identify the key Operational Test & Evaluation (OT&E) activities that must be coordinated with the Director, Operational Test & Evaluation (DOT&E) staff and the Operational Test Agencies (OTAs).] Director, Operational Test and Evaluation (DOT&E) Deputy Assistant Secretary of Defense, Developmental Test and Evaluation (DASD(DT&E)) Assistant Secretary of Defense for Research and Engineering (ASD(R&E)) Congres s 16) Each of the following issues impact test planning and execution activities except one. Select the one that is NOT a test planning/execution issue. [Identify issues affecting T&E resource requirements, test planning, and test execution activities in support of a program`s acquisition strategy.] Limited test reports Limited test resources Limited test time Limited test articles 17) The first key step of the Product Support Strategy Process Model includes which of the following? [Identify long term supportability and sustainment strategies through the application of the Product Support Business Model (PSBM).] [Remediation Accessed :N] Understanding Warfighter requirements in terms of performance Establishing the Product Support Management IPT, consisting of Government and private-sector functional experts and appropriate stakeholders Creating a Business Case Analysis Designating Product Support Integrator(s) 18) At which point in the life cycle does the Life Cycle Sustainment Plan (LCSP) focus on how sustainment performance is measured, managed, assessed, and reported? [Capture the Product Support Strategy and specific planning and execution details in the Life Cycle Sustainment Plan (LCSP).] [Remediation Accessed :N] FRP (P&D Phase) Milestone A (TMRR Phase) Milestone B (EMD Phase) IOC (O&S Phase) Module 2 Exam, Part I · Here is your test result.The dots represent the choices you have made. · The highlighted questions are the questions you have missed. · Remediation Accessed shows whether you accessed those links.'N' represents links not visited and 'Y' represents visited links. Back to Status page contains 6 Questions 1) Which one of the following test and evaluation (T&E) products is required at Milestone C? [29c (2). Identify the primary Test and Evaluation (T&E) products required at each acquisition milestone.] [Remediation Accessed :N] Operational Assessment (OA) Results Live Fire Test and Evaluation (LFT&E) Report Early Operational Assessment (EOA) DOT&E Report on Initial Operational Test and Evaluation (IOT&E) 2) What do operational testers evaluate to determine the degree to which a system is usable in its intended environment, e.g., reliable, supportable, maintainable, and transportable? [29c. Identify the primary Test and Evaluation (T&E) products required at each acquisition milestone.] [Remediation Accessed :N] Measures of Suitability (MOS) Measures of Effectiveness (MOE) Critical Technical Parameters (CTP) None of the answers are correct 3) Which of the following is required for all acquisition programs to make sure environmental issues are addressed? [3a (2). Identify the information required for a milestone review regarding environmental, safety, and occupational health issues.] Programmatic Environment Safety and Occupational Health Evaluation (PESHE) Categorical Exclusion (CATEX) Environmental Assessment (EA) Environmental Impact Statement (EIS) 4) The risk management model includes risk planning, risk identification, ___________, risk handling, and risk monitoring. [4d. Identify the five activities of the risk management process.] Risk analysis Risk avoidance Risk handling Risk control 5) To ensure an effective product support strategy, during which step of the Product Support Strategy Process Model should the PSM gain participation of Government and private-sector subject matter experts and industry and all appropriate stakeholders, including the Warfighter representatives? [Identify long term supportability and sustainment strategies through the application of the Product Support Business Model (PSBM).] Form the Product Support Management IPT Integrate Warfighter Requirements & Support Establish/Refine Product Support Arrangements Identify/Refine Performance Outcomes 6) At which point in the life cycle does the Life Cycle Sustainment Plan (LCSP) focus on developing the execution plan for the design, acquisition, fielding, and competition of sustainment activities to deliver the Product Support Package? [Capture the Product Support Strategy and specific planning and execution details in the Life Cycle Sustainment Plan (LCSP).] Milestone B (EMD Phase) Milestone A (TMRR Phase) Milestone C (P&D Phase) IOC (O&S Phase) Module 2 Exam, Part I · Here is your test result.The dots represent the choices you have made. · The highlighted questions are the questions you have missed. · Remediation Accessed shows whether you accessed those links.'N' represents links not visited and 'Y' represents visited links. Back to Status page contains 2 Questions 1) If the program is on the DOT&E Oversight List, which one of the following test and evaluation (T&E) products is required before the Full Rate Production Decision Review? [29c (2). Identify the primary Test and Evaluation (T&E) products required at each acquisition milestone.] [Remediation Accessed :N] DOT&E Report on Initial Operational Test and Evaluation (IOT&E) Live Fire T&E Waiver LRIP Article Quantities Approval Early Operational Assessment 2) The operational effectiveness and operational suitability questions that must be addressed during Operational Test and Evaluation (OT&E) to assess the system's capability to perform its mission are called ___________. [29c. Identify the primary Test and Evaluation (T&E) products required at each acquisition milestone.] Critical Operational Issues (COI) Critical Technical Parameters (CTP) Measures of Performance (MOP) Key Performance Parameters (KPP) 1) The Test and Evaluation Master Plan (TEMP) is mandated by DoD policy and must be updated periodically to ensure that it stays current as the program evolves through the life cycle. [Recognize how the Test and Evaluation Master Plan (TEMP) generation, staffing and approval process integrates all functional disciplines throughout the acquisition life cycle.] Fals e True 2) Who would certify the interoperability performance of a command and control system used by both the Army and the Navy? [Identify the key T&E support organizations within DoD.] Joint Interoperability Test Command (JITC) Joint Staff Army Test and Evaluation Command (ATEC) and Navy Operational Test and Evaluation Activity (OPTEVFOR) Joint Requirements Oversight Council (JROC) 3) Which one of the following test and evaluation (T&E) products is required at Milestone C? [Identify the primary Test and Evaluation (T&E) products required at each acquisition milestone.] Operational Assessment (OA) Results Live Fire Test and Evaluation (LFT&E) Report Early Operational Assessment (EOA) DOT&E Report on Initial Operational Test and Evaluation (IOT&E) 4) Operational Measures of Effectiveness (MOE) and Measures of Suitability (MOS) are formally documented in the ________. [Identify the primary Test and Evaluation (T&E) products required at each acquisition milestone.] [Remediation Accessed :N] Test and Evaluation Master Plan (TEMP) Acquisition Strategy Initial Capabilities Document (ICD) Work Breakdown Structure (WBS) 5) Joint Interoperability Test Command (JITC) has primary responsibility for developmental test and evaluation (T&E) functions throughout DoD. [Identify the requirements for interoperability testing.] True Fals e 6) The final approval authority for system-related National Environmental Policy Act (NEPA) documentation is the: [Identify the information required for a milestone review regarding environmental, safety, and occupational health issues.] [Remediation Accessed :N] Component Acquisition Executive (CAE) Program Manager (PM) Environmental coordinator Under Secretary of Defense (Environmental Security) 7) Threshold values, establishing (minimum) parameters for a system, and objective values, establishing desired parameters for a system, can be found in the: [Identify the information required for a decision review and recognize the significance of the Acquisition Program Baseline (APB), Key Performance Parameters (KPPs), and Acquisition Strategy.] Acquisition Program Baseline Acquisition Strategy Integrated Systems Engineering/Business Management Plan Initial Capabilities Document 8) One of the primary advantages of international cooperative development includes: [Identify the advantages and disadvantages of international armaments cooperative development in an acquisition strategy.] Reduced cost Foreign dependency Increased administrative requirements Improved currency exchange 9) The risk management process has five activities: [Identify the five activities of the risk management process.] Planning, Identification, Analysis, Handling, and Monitoring Analyzing, Designing, Developing, Testing and Observing Controlling, Alleviating, Assuming, Transferring and Targeting Planning, Controlling, Developing, Mitigating and Monitoring 10) Sources of risk include: [Use the risk management process to identify the major areas/sources of risk in an acquisition program strategy.] All of the answers are correct Schedul e Productio n Desig n 11) Which of the following is NOT a key tenet of Integrated Product and Process Development (IPPD)? [Relate the key tenets of Integrated Produce and Process Development (IPPD) to planning and executing an acquisition program.] Serial development of products and processes Customer focus Robust design Empowerme nt 12) Barriers to successful implementation of Integrated Product and Process Development (IPPD) include the following (Select all that apply): [Identify the barriers to successful Integrated Product Team (IPT) implementation.] Poorly run meetings or reviews Empowered, qualified team members Open discussions with no secrets Need for significant cultural change Contractor uses IPPD / DoD does not 13) Applying the Integrated Product and Process Development (IPPD) Management philosophy can result in significant benefits to the customer, DoD, and industry. Some of the primary benefits are reduced cost, increased quality, and _________________. [Identify the key acquisition best practices related to IPPD and IPT processes, including commercial practices that impact the relationship between Government and industry.] reduced risk increased schedule time lower training requirements reduced planning time 14) Which of the following is a duty of the Director, Operational Test and Evaluation (DOT&E)? [Identify the key Operational Test & Evaluation (OT&E) activities that must be coordinated with the Director, Operational Test & Evaluation (DOT&E) staff and the Operational Test Agencies (OTAs).] Reviewing and analyzing the results of operational test and evaluation (OT&E) conducted for each major DoD acquisition program Supporting developmental test and evaluation (DT&E) by participating in integrated product teams (IPTs) Providing statutory oversight and annual reporting to Congress on Electronic Combat Test Process Representing the Office of the Under Secretary of Defense for Acquisition, Technology and Logistics OUSD(AT&L) on Test Range and Resource Management Activities 15) Design of Experiments (DOE) can have a positive impact on test and evaluation (T&E) resources by providing an efficient/effective means to ascertain the appropriate test sample sizes and therefore enable reductions in cost and schedule. [Identify issues affecting T&E resource requirements, test planning, and test execution activities in support of a program's acquisition strategy.] True Fals e 16) The first key step of the Product Support Strategy Process Model includes which of the following? [Identify long term supportability and sustainment strategies through the application of the Product Support Business Model (PSBM).] [Remediation Accessed :N] Understanding Warfighter requirements in terms of performance Establishing the Product Support Management IPT, consisting of Government and private-sector functional experts and appropriate stakeholders Creating a Business Case Analysis Designating Product Support Integrator(s) 17) At which point in the life cycle does the Life Cycle Sustainment Plan (LCSP) focus on developing the execution plan for the design, acquisition, fielding, and competition of sustainment activities to deliver the Product Support Package? [Capture the Product Support Strategy and specific planning and execution details in the Life Cycle Sustainment Plan (LCSP).] Milestone B (EMD Phase) Milestone A (TMRR Phase) Milestone C (P&D Phase) IOC (O&S Phase) 18) The National Environment Policy Act (NEPA) can affect defense acquisition program managers because: [Identify key federal and DoD policies governing environmental, safety, and health issues associated with defense systems acquisition.] NEPA requires environmental impacts to be considered in the decision making process for acquisition programs. Violators of the NEPA process are subject to fines and prison sentences. NEPA requires environmental impacts to be completely eliminated before approval will be granted for an acquisition program. NEPA requires program managers to take remedial action to restore the environment before they can initiate a new acquisition program. 19) Critical Intelligence Parameters (CIPs) are those key performance thresholds of foreign threat systems, which, if exceeded, could compromise the mission effectiveness of the U.S. system in development. Adversary military doctrine, tactics, strategy, and ______________ of systems should be considered in CIPs. [Identify the intelligence organizations of the Intelligence community and recognize how the IC provides support to an acquisition program.] Expected employment Logistics footprint Objective values Warfare area 20) The Program Manager (PM) should request a Counterintelligence (CI) analysis when an acquisition program containing Critical Program Information (CPI) is initiated. The CI analysis focuses on _____________________ and on how to counter the opposition's collection efforts. [Recognize how implementing program protection, cybersecurity, and counterintelligence requirements into the acquisition strategy help to reduce overall program risk.] How the opposition sees the program Software assurance Authentication for allowing access Information systems infrastructure 1) What do operational testers evaluate to determine the degree to which a system is usable in its intended environment, e.g., reliable, supportable, maintainable, and transportable? [Identify the primary Test and Evaluation (T&E) products required at each acquisition milestone.] Measures of Suitability (MOS) Measures of Effectiveness (MOE) Critical Technical Parameters (CTP) None of the answers are correct 2) What documentation must be completed prior to a milestone review for a program that will significantly affect the quality of the environment? [Identify the information required for a milestone review regarding environmental, safety, and occupational health issues.] An Environmental Impact Statement (EIS) A Categorical Exclusion (CATEX) An Environmental Assessment (EA) A Request for Waiver 3) To ensure an effective product support strategy, during which step of the Product Support Strategy Process Model should the PSM gain participation of Government and private-sector subject matter experts and industry and all appropriate stakeholders, including the Warfighter representatives? [Identify long term supportability and sustainment strategies through the application of the Product Support Business Model (PSBM).] Form the Product Support Management IPT Integrate Warfighter Requirements & Support Establish/Refine Product Support Arrangements Identify/Refine Performance Outcomes 1) As part of the DoD-recommended Test and Evaluation Master Plan (TEMP) format, which of the following documents is considered to be one of the four parts of the TEMP that serve as a starting point for organizing a successful T&E program? [Recognize how the Test and Evaluation Master Plan (TEMP) generation, staffing and approval process integrates all functional disciplines throughout the acquisition life cycle.] Test and Evaluation Strategy Acquisition Strategy Integrated Master Plan Logistics Funding Resource Summary 2) Which one of the following organizations would evaluate measures of effectiveness (MOEs) to determine how well a munitions system can perform its mission? [Identify the key T&E support organizations within DoD.] Marine Corps Operational Test and Evaluation Activity (MCOTEA) Marine Corps Systems Command (MARCORSYSCOM) Defense Contract Management Agency (DCMA) Joint Interoperability Test Command (JITC) 3) Which one of the following test and evaluation (T&E) products is required at Milestone B? [Identify the primary Test and Evaluation (T&E) products required at each acquisition milestone.] [Remediation Accessed :N] Identification of LRIP Quantities Operational Assessment No T&E products are required at MS B Waiver of Military Equipment Program Description 4) The operational effectiveness and operational suitability questions that must be addressed during Operational Test and Evaluation (OT&E) to assess the system's capability to perform its mission are called ___________. [Identify the primary Test and Evaluation (T&E) products required at each acquisition milestone.] Critical Operational Issues (COI) Critical Technical Parameters (CTP) Measures of Performance (MOP) Key Performance Parameters (KPP) 5) The Joint Staff has oversight for certifying interoperability capability requirements for the Army, Navy, Air Force, and Marine Corps are valid. [Identify the requirements for interoperability testing.] Fals e True 6) What documentation must be completed prior to a milestone review for a program that will significantly affect the quality of the environment? [Identify the information required for a milestone review regarding environmental, safety, and occupational health issues.] An Environmental Impact Statement (EIS) A Categorical Exclusion (CATEX) An Environmental Assessment (EA) A Request for Waiver 7) The Acquisition Strategy should normally be generated using an integrated product team (IPT) approach, including representation from all of the players listed below EXCEPT the _________. [Identify the information required for a decision review and recognize the significance of the Acquisition Program Baseline (APB), Key Performance Parameters (KPPs), and Acquisition Strategy.] Milestone Decision Authority Contracting Officer User Representative Financial Analyst 8) DoD policy is to consider international cooperative development only after U.S.-only solutions have been shown to be impractical. [Identify the advantages and disadvantages of international armaments cooperative development in an acquisition strategy.] Fals e True 9) Monitoring the performance of risk handling actions is involved in which step of the risk management process? [Identify the five activities of the risk management process.] Risk monitoring Risk mitigation Risk identification Risk analysis 10) The four common risk mitigation strategies are: [Use the risk management process to identify the major areas/sources of risk in an acquisition program strategy.] Avoiding, Controlling, Transferring, and Assuming Handling, Tracking, Incurring, and Reacting Accepting, Researching, Allocating, and Delimiting Researching, Adopting, Adapting, and Constraining 11) Transitioning to Integrated Product and Process Development (IPPD) will involve application of certain key tenets, such as customer focus, concurrent development, and: [Relate the key tenets of Integrated Produce and Process Development (IPPD) to planning and executing an acquisition program.] Event-driven scheduling Supervisory leadership Reliance on independent organizations Risk avoidance 12) A "not invented here" mentality is considered: [Identify the barriers to successful Integrated Product Team (IPT) implementation.] A barrier to IPPD implementation A key tenet of Integrated Product and Process Development (IPPD) A guiding principle of successful Integrated Product Teams (IPTs) A "Rule of the Road" for effective IPPD implementation 13) Applying the Integrated Product and Process Development (IPPD) Management philosophy can result in significant benefits to the customer, DoD, and industry. Some of the primary benefits are reduced cost, increased quality, and _________________. [Identify the key acquisition best practices related to IPPD and IPT processes, including commercial practices that impact the relationship between Government and industry.] reduced risk increased schedule time lower training requirements reduced planning time 14) Responsibility for reviewing and analyzing the results of operational test and evaluation (OT&E) conducted for each major DoD acquisition program belongs to? [Identify the key Operational Test & Evaluation (OT&E) activities that must be coordinated with the Director, Operational Test & Evaluation (DOT&E) staff and the Operational Test Agencies (OTAs).] Director, Operational Test and Evaluation (DOT&E) Deputy Assistant Secretary of Defense, Developmental Test and Evaluation (DASD(DT&E)) Assistant Secretary of Defense for Research and Engineering (ASD(R&E)) Congres s 15) Design of Experiments (DOE) can have a positive impact on test and evaluation (T&E) resources by providing an efficient/effective means to ascertain the appropriate test sample sizes and therefore enable reductions in cost and schedule. [Identify issues affecting T&E resource requirements, test planning, and test execution activities in support of a program's acquisition strategy.] [Remediation Accessed :N] Fals e True 16) To ensure an effective product support strategy, during which step of the Product Support Strategy Process Model should the PSM gain participation of Government and private-sector subject matter experts and industry and all appropriate stakeholders, including the Warfighter representatives? [Identify long term supportability and sustainment strategies through the application of the Product Support Business Model (PSBM).] Form the Product Support Management IPT Integrate Warfighter Requirements & Support Establish/Refine Product Support Arrangements Identify/Refine Performance Outcomes 17) At which point in the life cycle does the Life Cycle Sustainment Plan (LCSP) focus on how sustainment performance is measured, managed, assessed, and reported? [Capture the Product Support Strategy and specific planning and execution details in the Life Cycle Sustainment Plan (LCSP).] FRP (P&D Phase) Milestone A (TMRR Phase) Milestone B (EMD Phase) IOC (O&S Phase) 18) What is the preferred method of controlling environmentally hazardous materials during manufacturing, operations, and disposal? [Identify key federal and DoD policies governing environmental, safety, and health issues associated with defense systems acquisition.] Source reduction or elimination is the most highly preferred control strategy. Treatment of hazardous wastes is preferred over recycling because of lower manufacturing costs. Disposal is the preferred method because of new technologies and improved landfill processes. Recycling is preferred over source reduction because reuse of hazardous substances costs less than substituting alternate processes. 19) System-specific Validated Online Lifecycle Threat (VOLT) reports are required to be kept current and validated throughout the acquisition process. All Major Defense Acquisition Programs (MDAPs) must have a validated VOLT in place at: [Identify the intelligence organizations of the Intelligence community and recognize how the IC provides support to an acquisition program.] [Remediation Accessed :N] Milestone A (TMRR Phase) Milestone B (EMD Phase) IOC (O&S Phase) FRP (P&D Phase) 20) As part of the Program Protection Plan (PPP), cybersecurity is a critical priority for DoD. Effective cybersecurity in DoD acquisition programs encompasses all of the necessary actions taken to ensure the _________________ of a system's information to enable warfighting operations. [Recognize how implementing program protection, cybersecurity, and counterintelligence requirements into the acquisition strategy help to reduce overall program risk.] Confidentiality, Integrity and Availability (CIA) Reliability, Availability, and Maintainability (RAM) Suitability and effectiveness Technological superiority 1) If the program is on the DOT&E Oversight List, which one of the following test and evaluation (T&E) products is required before the Full Rate Production Decision Review? [Identify the primary Test and Evaluation (T&E) products required at each acquisition milestone.] DOT&E Report on Initial Operational Test and Evaluation (IOT&E) Live Fire T&E Waiver LRIP Article Quantities Approval Early Operational Assessment 2) Regarding test and evaluation (T&E) issues that may affect a program's acquisition strategy, the program office can use ______________ to aid in understanding the implications of any necessary tradeoffs among testing constraints. [Identify issues affecting T&E resource requirements, test planning, and test execution activities in support of a program's acquisition strategy.] [Remediation Accessed :N] Design of Experiments (DOE) Simulation-Based Acquisitions Modeling and Simulation Early Operational Assessments 3) The ____________________ provides military intelligence to defense policy makers, force planners and warfighters in DOD in support of weapons system acquisition. [Identify the intelligence organizations of the Intelligence community and recognize how the IC provides support to an acquisition program.] Defense Intelligence Agency (DIA) Director of National Intelligence (DNI) National Security Agency (NSA) Army Intelligence [Show More]

Last updated: 2 years ago

Preview 1 out of 34 pages